Georg Fischer 45 Degrees PVDF Socket Fusion Elbow PN16 d16-d63
The Georg Fischer SYGEF Standard 45 degrees PVDF socket fusion elbow PN16 is an injection-moulded thermoplastic fitting engineered for precise directional changes in chemical distribution, industrial processing, and high-purity utility systems. Designed for process engineers and industrial piping installers, this component accommodates outer diameters from d16 mm to d63 mm while providing continuous pressure containment of 16 bar at 20 degrees C across a thermal operating envelope of -20 degrees C to 140 degrees C.
Technical specifications
The SYGEF Standard 45 degrees elbow ensures low head loss, high pressure integrity, and superior structural rigidity under demanding operational cycles. Its smooth internal bore limits biofilm build-up and particulate accumulation across industrial processes.
- Nominal pressure rating: PN16 (16 bar at 20 degrees C) with safety factor C = 2.0 based on a 25-year water service life
- Operating temperature range: continuous service from -20 degrees C to 140 degrees C
- Internal surface finish: roughness Ra ≤ 0.5 µm to restrict bacterial adhesion and turbulence
- Mechanical strength: yield stress ≥ 48 N/mm² and tensile modulus ≥ 1800 N/mm² per EN ISO 527
- Charpy notched impact resistance: ≥ 8 kJ/m² at 23 degrees C according to EN ISO 179
- Thermal expansion: 0.12 to 0.18 mm/(m·K) per DIN 53752 with thermal conductivity of 0.19 W/(m·K) per EN 12664
Materials and standards
Manufactured from unpigmented polyvinylidene fluoride, this fitting conforms strictly to ISO 10931 requirements for industrial thermoplastic fluoropolymer pressure systems. The pure polymer resin exhibits a density of approximately 1.78 g/cm³ and a melting point exceeding 175 degrees C, ensuring chemical inertness against concentrated mineral acids, halogens, and aliphatic hydrocarbons.
The compound resists aggressive sanitisation regimens, including continuous ozone exposure, hot water rinsing, chemical sanitisation, and inline steam sterilisation without suffering stress cracking or mechanical embrittlement. Embossed traceability markings on each fitting body provide comprehensive quality control and material verification from factory to site.
Installation and jointing
The elbow connects to metric SYGEF pipes and fittings using heated-tool socket fusion in accordance with DVS 2207-15 guidelines. The socket geometry guides uniform insertion depth, creating high-integrity homogeneous welds without compromising the internal hydraulic diameter.
Installers should clean joining surfaces thoroughly, use calibrated socket fusion heating elements, and observe exact heating and cooling cycles. Proper axial alignment during insertion prevents torsional stress, ensuring a leak-free joint capable of withstanding industrial operating pressures.
The Georg Fischer SYGEF Standard 45 degrees PVDF socket fusion elbow PN16 is an injection-moulded thermoplastic fitting engineered for precise directional changes in chemical distribution, industrial processing, and high-purity utility systems. Designed for process engineers and industrial piping installers, this component accommodates outer diameters from d16 mm to d63 mm while providing continuous pressure containment of 16 bar at 20 degrees C across a thermal operating envelope of -20 degrees C to 140 degrees C.
Technical specifications
The SYGEF Standard 45 degrees elbow ensures low head loss, high pressure integrity, and superior structural rigidity under demanding operational cycles. Its smooth internal bore limits biofilm build-up and particulate accumulation across industrial processes.
- Nominal pressure rating: PN16 (16 bar at 20 degrees C) with safety factor C = 2.0 based on a 25-year water service life
- Operating temperature range: continuous service from -20 degrees C to 140 degrees C
- Internal surface finish: roughness Ra ≤ 0.5 µm to restrict bacterial adhesion and turbulence
- Mechanical strength: yield stress ≥ 48 N/mm² and tensile modulus ≥ 1800 N/mm² per EN ISO 527
- Charpy notched impact resistance: ≥ 8 kJ/m² at 23 degrees C according to EN ISO 179
- Thermal expansion: 0.12 to 0.18 mm/(m·K) per DIN 53752 with thermal conductivity of 0.19 W/(m·K) per EN 12664
Materials and standards
Manufactured from unpigmented polyvinylidene fluoride, this fitting conforms strictly to ISO 10931 requirements for industrial thermoplastic fluoropolymer pressure systems. The pure polymer resin exhibits a density of approximately 1.78 g/cm³ and a melting point exceeding 175 degrees C, ensuring chemical inertness against concentrated mineral acids, halogens, and aliphatic hydrocarbons.
The compound resists aggressive sanitisation regimens, including continuous ozone exposure, hot water rinsing, chemical sanitisation, and inline steam sterilisation without suffering stress cracking or mechanical embrittlement. Embossed traceability markings on each fitting body provide comprehensive quality control and material verification from factory to site.
Installation and jointing
The elbow connects to metric SYGEF pipes and fittings using heated-tool socket fusion in accordance with DVS 2207-15 guidelines. The socket geometry guides uniform insertion depth, creating high-integrity homogeneous welds without compromising the internal hydraulic diameter.
Installers should clean joining surfaces thoroughly, use calibrated socket fusion heating elements, and observe exact heating and cooling cycles. Proper axial alignment during insertion prevents torsional stress, ensuring a leak-free joint capable of withstanding industrial operating pressures.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
16 mm
|
735150105 |
Material: PVDF
PN: 16 Bar
|
pcs | €18.89 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
20 mm
|
735150106 |
Material: PVDF
PN: 16 Bar
|
pcs | €18.89 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
|
735150107 |
Material: PVDF
PN: 16 Bar
|
pcs | €22.46 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
|
735150108 |
Material: PVDF
PN: 16 Bar
|
pcs | €25.43 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
|
735150109 |
Material: PVDF
PN: 16 Bar
|
pcs | €49.13 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
|
735150110 |
Material: PVDF
PN: 16 Bar
|
pcs | €62.34 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
|
735150111 |
Material: PVDF
PN: 16 Bar
|
pcs | €87.62 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|