Electric ball valve COOL-FIT 4.0 type 179 d32-90 mm

Electric ball valve COOL-FIT 4.0 type 179 d32-90 mm

Material: ABS / PE100 PN: 10 Bar

  Datasheet (PDF)

The Georg Fischer COOL-FIT 4.0 electric ball valve type 179 delivers automated flow control and dependable shut-off across pre-insulated piping networks in sizes d32 to d90 mm. Designed for refrigeration, HVAC chiller loops, and process cooling, this PN10 rated assembly combines an ABS valve core with PE100 SDR11 spigot ends, factory-fitted insulation half shells, and an integrated 100-230V electric actuator with integrated heating to prevent condensation.

Technical specifications

The assembly operates as an automated secondary cooling valve rated for nominal system pressures of up to 10 bar. It incorporates continuous position feedback signaling open, close, and intermediate states to streamline integration with building management and industrial process automation systems.

  • Nominal pressure rating: 10 bar (PN10) across dimensions d32 to d90 mm
  • Electric actuator supply voltage: 100-230V at 50-60 Hz with 90 degrees rotation
  • Media temperature operating range: minus 50 degrees Celsius to plus 60 degrees Celsius
  • Valve core and seating: Acrylonitrile Butadiene Styrene (ABS) body with chemically resistant PTFE ball seats
  • Insulation: Closed-cell polyurethane foam with vapor-tight sealing lips and protective outer casing

Applications

Engineered specifically for low-temperature industrial and commercial refrigeration, the type 179 ball valve isolates and regulates secondary refrigerant loops without surface sweating. The internal heater inside the actuator housing maintains moisture-free electronic components during continuous chilled operation.

Key operating environments include industrial food storage, cold chain logistics, beverage and dairy production plants, pharmaceutical process chillers, and centralized rooftop HVAC condenser water distribution. The chemically inert fluid path accommodates chilled water, salt brine solutions, and concentrated ethylene or propylene glycol mixtures without risk of encrustation or internal scaling.

Installation and jointing

The valve assembly integrates into COOL-FIT 4.0 lines via PE100 SDR11 metric spigot ends connected with standard electrofusion couplers. The valve base includes integrated stainless steel threaded inserts to allow direct, vibration-resistant anchoring to structural brackets without stressing polymer components.

Once electrofusion welding of the carrier pipe is completed and verified, the factory-supplied insulation half shells close securely around the valve body. Sealing lips and adhesive bonding maintain an unbroken, vapor-tight moisture barrier that completely prevents energy loss and eliminates exterior condensation across the entire valve station.

  Datasheet (PDF)

The Georg Fischer COOL-FIT 4.0 electric ball valve type 179 delivers automated flow control and dependable shut-off across pre-insulated piping networks in sizes d32 to d90 mm. Designed for refrigeration, HVAC chiller loops, and process cooling, this PN10 rated assembly combines an ABS valve core with PE100 SDR11 spigot ends, factory-fitted insulation half shells, and an integrated 100-230V electric actuator with integrated heating to prevent condensation.

Technical specifications

The assembly operates as an automated secondary cooling valve rated for nominal system pressures of up to 10 bar. It incorporates continuous position feedback signaling open, close, and intermediate states to streamline integration with building management and industrial process automation systems.

  • Nominal pressure rating: 10 bar (PN10) across dimensions d32 to d90 mm
  • Electric actuator supply voltage: 100-230V at 50-60 Hz with 90 degrees rotation
  • Media temperature operating range: minus 50 degrees Celsius to plus 60 degrees Celsius
  • Valve core and seating: Acrylonitrile Butadiene Styrene (ABS) body with chemically resistant PTFE ball seats
  • Insulation: Closed-cell polyurethane foam with vapor-tight sealing lips and protective outer casing

Applications

Engineered specifically for low-temperature industrial and commercial refrigeration, the type 179 ball valve isolates and regulates secondary refrigerant loops without surface sweating. The internal heater inside the actuator housing maintains moisture-free electronic components during continuous chilled operation.

Key operating environments include industrial food storage, cold chain logistics, beverage and dairy production plants, pharmaceutical process chillers, and centralized rooftop HVAC condenser water distribution. The chemically inert fluid path accommodates chilled water, salt brine solutions, and concentrated ethylene or propylene glycol mixtures without risk of encrustation or internal scaling.

Installation and jointing

The valve assembly integrates into COOL-FIT 4.0 lines via PE100 SDR11 metric spigot ends connected with standard electrofusion couplers. The valve base includes integrated stainless steel threaded inserts to allow direct, vibration-resistant anchoring to structural brackets without stressing polymer components.

Once electrofusion welding of the carrier pipe is completed and verified, the factory-supplied insulation half shells close securely around the valve body. Sealing lips and adhesive bonding maintain an unbroken, vapor-tight moisture barrier that completely prevents energy loss and eliminates exterior condensation across the entire valve station.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 32 mm
138546208
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
138546209
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
138546210
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
138546211
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
138546212
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
138546213
Material: ABS / PE100
PN: 10 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 138546208
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: 138546209
D: 40 mm
Ships in 24 hours
On Request / pcs
SKU: 138546210
D: 50 mm
Ships in 24 hours
On Request / pcs
SKU: 138546211
D: 63 mm
Ships in 24 hours
On Request / pcs
SKU: 138546212
D: 75 mm
Ships in 24 hours
On Request / pcs
SKU: 138546213
D: 90 mm
Ships in 24 hours
On Request / pcs