PVC-KG Tapping Saddle 87 Degrees SN4 D200-500mm

PVC-KG Tapping Saddle 87 Degrees SN4 D200-500mm

Material: PVC-KG SN: 4

  Datasheet (PDF)

The PVC-KG tapping saddle 87 degrees SN4 provides civil contractors and utility installers with a permanent, watertight lateral connection directly onto buried non-pressure sewer collectors without sectioning the main pipeline. Designed for collector diameters from D200 mm to D500 mm with D160 mm or D200 mm branch outlets, this fitting combines a solvent-welded curved saddle base with an integrated gasketed socket for reliable gravity drainage infrastructure.

Technical specifications

This 87-degree tapping saddle is engineered for lateral connections into buried gravity drainage lines, ensuring optimal hydraulic entry dynamics and structural integrity under soil loads.

  • Main collector compatibility: Suits smooth-wall PVC-U gravity sewer collectors from DN 200 mm up to DN 500 mm.
  • Branch outlet angle: Nominal 87 degrees for efficient hydraulic flow transition and sediment prevention.
  • Ring stiffness class: SN4 (nominal 4 kN/m²), fully compatible with SN4 and SN2 buried pipeline networks.
  • Outlet jointing: Integral push-fit socket equipped with a factory-retained EPDM elastomeric lip seal.
  • Base connection: Radius-matched curved saddle plate engineered for rigid solvent-welded chemical bonding.
  • Effluent limits: Handles wastewater pH ranges from 2 to 12 and continuous operating temperatures up to 60 degrees Celsius for smaller branches and 40 degrees Celsius for larger profiles.

Materials and standards

Manufactured from unplasticized polyvinyl chloride (PVC-U) in safety orange RAL 8023, the saddle provides complete immunity to electrochemical corrosion and chemical degradation from domestic and industrial effluents.

The component conforms fully to EN 1401-1 for underground non-pressure drainage and sewerage systems, certified for application area code "U" beyond building foundations. The pre-installed synthetic rubber sealing ring meets EN 681-1 standards, ensuring long-term elasticity and hermetic sealing even in shifting soils. Hydraulically smooth internal wall surfaces with an absolute roughness coefficient below 0.01 mm prevent slime buildup, incrustation, and flow restriction over a projected operational life exceeding 50 years.

Installation and jointing

Installation of the tapping saddle requires core drilling of the main collector pipe followed by thorough cleaning and chemical solvent welding of the base plate.

Contractors core-drill the collector crown to match the saddle spigot diameter and deburr the pipe aperture. The mating surfaces of both the collector exterior and the saddle curvature are degreased with a suitable solvent cleaner before applying an even coat of PVC solvent cement. Once pressed firmly into position and allowed to cure according to manufacturer directives, the incoming lateral PVC pipe is lubricated and inserted into the gasketed 87-degree socket. Bedding and backfilling should proceed in accordance with EN 1610 guidelines to maintain alignment and safeguard the completed branch against localized trench compaction stresses.

  Datasheet (PDF)

The PVC-KG tapping saddle 87 degrees SN4 provides civil contractors and utility installers with a permanent, watertight lateral connection directly onto buried non-pressure sewer collectors without sectioning the main pipeline. Designed for collector diameters from D200 mm to D500 mm with D160 mm or D200 mm branch outlets, this fitting combines a solvent-welded curved saddle base with an integrated gasketed socket for reliable gravity drainage infrastructure.

Technical specifications

This 87-degree tapping saddle is engineered for lateral connections into buried gravity drainage lines, ensuring optimal hydraulic entry dynamics and structural integrity under soil loads.

  • Main collector compatibility: Suits smooth-wall PVC-U gravity sewer collectors from DN 200 mm up to DN 500 mm.
  • Branch outlet angle: Nominal 87 degrees for efficient hydraulic flow transition and sediment prevention.
  • Ring stiffness class: SN4 (nominal 4 kN/m²), fully compatible with SN4 and SN2 buried pipeline networks.
  • Outlet jointing: Integral push-fit socket equipped with a factory-retained EPDM elastomeric lip seal.
  • Base connection: Radius-matched curved saddle plate engineered for rigid solvent-welded chemical bonding.
  • Effluent limits: Handles wastewater pH ranges from 2 to 12 and continuous operating temperatures up to 60 degrees Celsius for smaller branches and 40 degrees Celsius for larger profiles.

Materials and standards

Manufactured from unplasticized polyvinyl chloride (PVC-U) in safety orange RAL 8023, the saddle provides complete immunity to electrochemical corrosion and chemical degradation from domestic and industrial effluents.

The component conforms fully to EN 1401-1 for underground non-pressure drainage and sewerage systems, certified for application area code "U" beyond building foundations. The pre-installed synthetic rubber sealing ring meets EN 681-1 standards, ensuring long-term elasticity and hermetic sealing even in shifting soils. Hydraulically smooth internal wall surfaces with an absolute roughness coefficient below 0.01 mm prevent slime buildup, incrustation, and flow restriction over a projected operational life exceeding 50 years.

Installation and jointing

Installation of the tapping saddle requires core drilling of the main collector pipe followed by thorough cleaning and chemical solvent welding of the base plate.

Contractors core-drill the collector crown to match the saddle spigot diameter and deburr the pipe aperture. The mating surfaces of both the collector exterior and the saddle curvature are degreased with a suitable solvent cleaner before applying an even coat of PVC solvent cement. Once pressed firmly into position and allowed to cure according to manufacturer directives, the incoming lateral PVC pipe is lubricated and inserted into the gasketed 87-degree socket. Bedding and backfilling should proceed in accordance with EN 1610 guidelines to maintain alignment and safeguard the completed branch against localized trench compaction stresses.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 200 mm
D 160 mm
FVE0319
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 250 mm
D 160 mm
SPVSA250X160IOR
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 315 mm
D 160 mm
SPVSA315X160IOR
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 315 mm
D 200 mm
FVI0033
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 400 mm
D 160 mm
SPVSA400X160IOR
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 400 mm
D 200 mm
SPVSA400X200IOR
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 500 mm
D 160 mm
MFD0261
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 500 mm
D 200 mm
MFD0271
Material: PVC-KG
SN: 4
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: FVE0319
D: 200 mm
D: 160 mm
Ships in 24 hours
On Request / pcs
SKU: SPVSA250X160IOR
D: 250 mm
D: 160 mm
Ships in 24 hours
On Request / pcs
SKU: SPVSA315X160IOR
D: 315 mm
D: 160 mm
Ships in 24 hours
On Request / pcs
SKU: FVI0033
D: 315 mm
D: 200 mm
Ships in 24 hours
On Request / pcs
SKU: SPVSA400X160IOR
D: 400 mm
D: 160 mm
Ships in 24 hours
On Request / pcs
SKU: SPVSA400X200IOR
D: 400 mm
D: 200 mm
Ships in 24 hours
On Request / pcs
SKU: MFD0261
D: 500 mm
D: 160 mm
Ships in 24 hours
On Request / pcs
SKU: MFD0271
D: 500 mm
D: 200 mm
Ships in 24 hours
On Request / pcs