Metal transition fitting PPFR x SS SPG x MPT 2x2 inch
The Georg Fischer Fuseal metal transition fitting (part number 528907) provides a dependable, chemically resistant connection between flame-retardant polypropylene drainage networks and threaded metallic equipment. Engineered specifically for corrosive chemical DWV (drain, waste, and vent) installations and laboratory drainage, this hybrid fitting transitions from a 2-inch PPFR spigot (SPG) to a 2-inch stainless steel male pipe thread (MPT). It ensures mechanical integrity and leak-free performance under continuous operating temperatures up to 180 degrees Fahrenheit (82 degrees Celsius).
Technical specifications
This precision-fabricated hybrid fitting pairs a flame-retardant polypropylene spigot with a rigid stainless steel threaded adapter for chemical drainage transitions. It operates reliably in both gravity DWV runs and pumped drainage systems rated up to 50 psi for electrofusion and 35 psi for Fast-Lock mechanical joints.
- Component type: Metal transition fitting (PPFR x SS)
- Connection profile: 2-inch spigot (SPG) x 2-inch male pipe thread (MPT)
- Dimensions: Overall length 11.72 in, PPFR spigot length 6.50 in, SS thread length 3.72 in
- Pressure ratings: Up to 50 psi (electrofusion) or 35 psi (Fuseal Fast-Lock mechanical joint)
- Thermal limits: Continuous service up to 180 degrees Fahrenheit (82 degrees Celsius); intermittent peaks up to 212 degrees Fahrenheit (100 degrees Celsius)
- Part identification: Georg Fischer part number 528907
Materials and standards
Constructed with a flame-retardant polypropylene (PPFR) spigot fused to a stainless steel threaded end, this fitting complies with USPH sanitary standards for drainage transitions. The assembly prevents galvanic corrosion, pitting, scaling, and electrolytic degradation across severe laboratory waste streams.
The PPFR compound provides broad chemical resistance against dilute mineral acids, alkalis, alcohols, solvents, and aqueous salt solutions. Specially formulated matrix pigmentation shields above-ground installations against ultraviolet degradation, while heat-stabilized properties maintain structural strength during high-temperature thermal cycling.
Installation and jointing
The plastic spigot accommodates both Fuseal Fast-Lock mechanical joint collars and Fuseal electrofusion couplings with locking collars. This versatile interface allows installers to connect thermoplastic piping directly to threaded metal valves or equipment without solvent cements or specialized grooving tools.
For mechanical joint connections, contractors utilize Fast-Lock collars with EPDM or FKM gaskets torqued to specified limits, permitting immediate pressure testing with zero curing delay. When utilizing electrofusion, locking collars paired with the Electro Plus machine produce permanent, homogeneous joints suitable for inaccessible wall chases and critical industrial installations.
The Georg Fischer Fuseal metal transition fitting (part number 528907) provides a dependable, chemically resistant connection between flame-retardant polypropylene drainage networks and threaded metallic equipment. Engineered specifically for corrosive chemical DWV (drain, waste, and vent) installations and laboratory drainage, this hybrid fitting transitions from a 2-inch PPFR spigot (SPG) to a 2-inch stainless steel male pipe thread (MPT). It ensures mechanical integrity and leak-free performance under continuous operating temperatures up to 180 degrees Fahrenheit (82 degrees Celsius).
Technical specifications
This precision-fabricated hybrid fitting pairs a flame-retardant polypropylene spigot with a rigid stainless steel threaded adapter for chemical drainage transitions. It operates reliably in both gravity DWV runs and pumped drainage systems rated up to 50 psi for electrofusion and 35 psi for Fast-Lock mechanical joints.
- Component type: Metal transition fitting (PPFR x SS)
- Connection profile: 2-inch spigot (SPG) x 2-inch male pipe thread (MPT)
- Dimensions: Overall length 11.72 in, PPFR spigot length 6.50 in, SS thread length 3.72 in
- Pressure ratings: Up to 50 psi (electrofusion) or 35 psi (Fuseal Fast-Lock mechanical joint)
- Thermal limits: Continuous service up to 180 degrees Fahrenheit (82 degrees Celsius); intermittent peaks up to 212 degrees Fahrenheit (100 degrees Celsius)
- Part identification: Georg Fischer part number 528907
Materials and standards
Constructed with a flame-retardant polypropylene (PPFR) spigot fused to a stainless steel threaded end, this fitting complies with USPH sanitary standards for drainage transitions. The assembly prevents galvanic corrosion, pitting, scaling, and electrolytic degradation across severe laboratory waste streams.
The PPFR compound provides broad chemical resistance against dilute mineral acids, alkalis, alcohols, solvents, and aqueous salt solutions. Specially formulated matrix pigmentation shields above-ground installations against ultraviolet degradation, while heat-stabilized properties maintain structural strength during high-temperature thermal cycling.
Installation and jointing
The plastic spigot accommodates both Fuseal Fast-Lock mechanical joint collars and Fuseal electrofusion couplings with locking collars. This versatile interface allows installers to connect thermoplastic piping directly to threaded metal valves or equipment without solvent cements or specialized grooving tools.
For mechanical joint connections, contractors utilize Fast-Lock collars with EPDM or FKM gaskets torqued to specified limits, permitting immediate pressure testing with zero curing delay. When utilizing electrofusion, locking collars paired with the Electro Plus machine produce permanent, homogeneous joints suitable for inaccessible wall chases and critical industrial installations.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
Thread
2 x 2
|
528907 |
Material: PPFR / SS
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|