Black HDPE coupler EF PE100 SDR26 PN6 for electrofusion pipe connection

Coupler EF PE100 SDR26 PN6

Material: Polyethylene PN: 6 Bar SDR: 26

  Datasheet (PDF) |   | |   Product Range |   | | Instructional Video

The Georg Fischer ELGEF Plus PE100 SDR26 electrofusion coupler is engineered for joining large-diameter polyethylene pressure pipelines in municipal water distribution and civil utility networks. Suitable for nominal pipe diameters from d710 mm to d1200 mm, this fitting provides a fully homogeneous, leak-tight fusion joint with an expected design service life of up to 100 years. BigWeld supplies this heavy-duty fitting across Europe as an authorised Georg Fischer distributor.

Technical specifications

This electrofusion coupler is dimensioned according to SDR26 geometry and is rated for an operating pressure of 6 bar in utility water networks. It integrates precisely spaced resistance wires and standardized connection pins to ensure controlled energy delivery and thermal distribution during installation.

  • Nominal outer diameter range: d710 mm to d1200 mm
  • Standard Dimension Ratio: SDR26
  • Nominal pressure rating: 6 bar for water service
  • Connector terminal size: 4 mm electrical pin contacts
  • Design service life: up to 100 years under standard operating conditions
  • Compatible pipe wall SDR range: SDR9 to SDR26

Materials and standards

Manufactured from fully compounded virgin PE100 resin approved by the PE100+ Association, the coupler offers high structural stability and exceptional resistance to slow crack growth. The material formulation resists environmental stress cracking, corrosion, and typical chemical aggression encountered in buried utility installations.

The ELGEF Plus SDR26 fitting complies with EN 12201 requirements for polyethylene piping systems intended for water supply and infrastructure pipelines. Quality management conforms to ISO 9001 and ISO 14001, supported by major European utility approvals including DVGW, KIWA, SVGW, and ÖVGW certifications for potable water and civil engineering applications.

Installation and jointing

Electrofusion jointing requires calibrated scraping of the pipe surface and stable clamping prior to welding with standard electrofusion control boxes. The embedded heating elements deliver uniform heat transfer across the complete fusion zone, creating a continuous molecular bond across the joint interface.

Standardized 4 mm terminal pins ensure seamless electrical compatibility with automated welding units utilizing optical barcode scanners or manual parameter entry. Site installers must observe mandatory cooling times and prevent mechanical stress during the fusion cycle to achieve permanent joint integrity across expansive pipeline networks.

  Datasheet (PDF) |   | |   Product Range |   | | Instructional Video

The Georg Fischer ELGEF Plus PE100 SDR26 electrofusion coupler is engineered for joining large-diameter polyethylene pressure pipelines in municipal water distribution and civil utility networks. Suitable for nominal pipe diameters from d710 mm to d1200 mm, this fitting provides a fully homogeneous, leak-tight fusion joint with an expected design service life of up to 100 years. BigWeld supplies this heavy-duty fitting across Europe as an authorised Georg Fischer distributor.

Technical specifications

This electrofusion coupler is dimensioned according to SDR26 geometry and is rated for an operating pressure of 6 bar in utility water networks. It integrates precisely spaced resistance wires and standardized connection pins to ensure controlled energy delivery and thermal distribution during installation.

  • Nominal outer diameter range: d710 mm to d1200 mm
  • Standard Dimension Ratio: SDR26
  • Nominal pressure rating: 6 bar for water service
  • Connector terminal size: 4 mm electrical pin contacts
  • Design service life: up to 100 years under standard operating conditions
  • Compatible pipe wall SDR range: SDR9 to SDR26

Materials and standards

Manufactured from fully compounded virgin PE100 resin approved by the PE100+ Association, the coupler offers high structural stability and exceptional resistance to slow crack growth. The material formulation resists environmental stress cracking, corrosion, and typical chemical aggression encountered in buried utility installations.

The ELGEF Plus SDR26 fitting complies with EN 12201 requirements for polyethylene piping systems intended for water supply and infrastructure pipelines. Quality management conforms to ISO 9001 and ISO 14001, supported by major European utility approvals including DVGW, KIWA, SVGW, and ÖVGW certifications for potable water and civil engineering applications.

Installation and jointing

Electrofusion jointing requires calibrated scraping of the pipe surface and stable clamping prior to welding with standard electrofusion control boxes. The embedded heating elements deliver uniform heat transfer across the complete fusion zone, creating a continuous molecular bond across the joint interface.

Standardized 4 mm terminal pins ensure seamless electrical compatibility with automated welding units utilizing optical barcode scanners or manual parameter entry. Site installers must observe mandatory cooling times and prevent mechanical stress during the fusion cycle to achieve permanent joint integrity across expansive pipeline networks.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 710 mm
753911950
Material: Polyethylene
PN: 6 Bar
SDR: 26
pcs €4,221.11
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 800 mm
753911951
Material: Polyethylene
PN: 6 Bar
SDR: 26
pcs €6,575.45
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 900 mm
753911952
Material: Polyethylene
PN: 6 Bar
SDR: 26
pcs €11,405.46
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 1000 mm
753911953
Material: Polyethylene
PN: 6 Bar
SDR: 26
pcs €12,383.50
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 1200 mm
753911954
Material: Polyethylene
PN: 6 Bar
SDR: 26
pcs €15,648.68
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 753911950
D: 710 mm
Ships in 24 hours
€4,221.11 / pcs
SKU: 753911951
D: 800 mm
Ships in 24 hours
€6,575.45 / pcs
SKU: 753911952
D: 900 mm
Ships in 24 hours
€11,405.46 / pcs
SKU: 753911953
D: 1000 mm
Ships in 24 hours
€12,383.50 / pcs
SKU: 753911954
D: 1200 mm
Ships in 24 hours
€15,648.68 / pcs