90 degree equal tee iJoint PP compression fitting with blue nuts

90 Degree Equal Tee iJoint PP Compression Fitting d16-110 PN16

Material: Polipropilena PN: 16 Bar

  Datasheet (PDF) |   Product Range | Instructional Video

The Georg Fischer iJoint 90 degree equal tee is a polypropylene compression fitting for equal three-way branching in pressurised PE and PEX networks, used in potable water distribution, house connections, service lines and agricultural irrigation. It covers metric diameters d16 to d110 mm, is rated PN16 and operates between -10 degrees C and +45 degrees C. The pipe is inserted without dismantling the nut.

Technical specifications

Every size of the iJoint equal tee carries a maximum operating pressure of PN16 (16 bar) with DVGW approval, within an operating temperature range of -10 degrees C to +45 degrees C. Sealing is handled by a factory-lubricated EPDM lip gasket and axial restraint by a polyacetal split grip ring that bites into the pipe wall.

  • Diameter range: d16 to d110 mm, equal outlets on all three ports.
  • Maximum operating pressure: PN16 (16 bar), DVGW approved.
  • Operating temperature: -10 degrees C to +45 degrees C.
  • Pipe compatibility: PE 80, PE 100, PEX and PEX-a to EN 12201 and ISO 4427.
  • Sealing: food-safe EPDM lip gasket, factory lubricated, sealing on ovalised, undersized or scratched pipe surfaces.
  • Mechanical joint testing: ISO 17885, DIN 8076-3, ISO 3501, ISO 3503, ISO 3458 and ISO 3459.

Materials and standards

The body and thrust ring are UV-stabilised polypropylene impact copolymer (PP-B) with long-term aging stability complying with ISO 9080; the nut is UV-stabilised blue polypropylene impact copolymer and the split grip ring is polyacetal (POM).

The fully plastic body is not subject to rust, incrustation or galvanic corrosion. Drinking water approvals held by the iJoint range include DVGW GW 335-B3, W270 and KTW in Germany, ACS in France, KIWA and ATA in the Netherlands, IIP and DM 174-06/04/2004 in Italy, and SVGW in Switzerland. Dimensional references for the connected pipe are DIN 8074, EN 12201-1/2, ISO 11922-1, ISO 4427, ISO 12162 and ISO 11922-1.

Installation and jointing

The tee is installed as a mechanical compression joint: the pipe end is pushed in without pre-disassembly and without chamfering, then the nut is tightened. The grip ring locks against pull-out while the thrust ring compresses the lip gasket onto the pipe outside diameter.

The joint resists water hammer and axial pull-out, and it can be dismantled and re-made, so the same fitting is used in permanent distribution networks and in temporary bypass lines. Operation outside the -10 degrees C to +45 degrees C band or above 16 bar is outside the stated limits of the range.

  Datasheet (PDF) |   Product Range | Instructional Video

The Georg Fischer iJoint 90 degree equal tee is a polypropylene compression fitting for equal three-way branching in pressurised PE and PEX networks, used in potable water distribution, house connections, service lines and agricultural irrigation. It covers metric diameters d16 to d110 mm, is rated PN16 and operates between -10 degrees C and +45 degrees C. The pipe is inserted without dismantling the nut.

Technical specifications

Every size of the iJoint equal tee carries a maximum operating pressure of PN16 (16 bar) with DVGW approval, within an operating temperature range of -10 degrees C to +45 degrees C. Sealing is handled by a factory-lubricated EPDM lip gasket and axial restraint by a polyacetal split grip ring that bites into the pipe wall.

  • Diameter range: d16 to d110 mm, equal outlets on all three ports.
  • Maximum operating pressure: PN16 (16 bar), DVGW approved.
  • Operating temperature: -10 degrees C to +45 degrees C.
  • Pipe compatibility: PE 80, PE 100, PEX and PEX-a to EN 12201 and ISO 4427.
  • Sealing: food-safe EPDM lip gasket, factory lubricated, sealing on ovalised, undersized or scratched pipe surfaces.
  • Mechanical joint testing: ISO 17885, DIN 8076-3, ISO 3501, ISO 3503, ISO 3458 and ISO 3459.

Materials and standards

The body and thrust ring are UV-stabilised polypropylene impact copolymer (PP-B) with long-term aging stability complying with ISO 9080; the nut is UV-stabilised blue polypropylene impact copolymer and the split grip ring is polyacetal (POM).

The fully plastic body is not subject to rust, incrustation or galvanic corrosion. Drinking water approvals held by the iJoint range include DVGW GW 335-B3, W270 and KTW in Germany, ACS in France, KIWA and ATA in the Netherlands, IIP and DM 174-06/04/2004 in Italy, and SVGW in Switzerland. Dimensional references for the connected pipe are DIN 8074, EN 12201-1/2, ISO 11922-1, ISO 4427, ISO 12162 and ISO 11922-1.

Installation and jointing

The tee is installed as a mechanical compression joint: the pipe end is pushed in without pre-disassembly and without chamfering, then the nut is tightened. The grip ring locks against pull-out while the thrust ring compresses the lip gasket onto the pipe outside diameter.

The joint resists water hammer and axial pull-out, and it can be dismantled and re-made, so the same fitting is used in permanent distribution networks and in temporary bypass lines. Operation outside the -10 degrees C to +45 degrees C band or above 16 bar is outside the stated limits of the range.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 16 mm
158400354
Material: Polipropilena
PN: 16 Bar
pcs €7.01
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 20 mm
158400223
Material: Polipropilena
PN: 16 Bar
pcs €4.04
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
158400224
Material: Polipropilena
PN: 16 Bar
pcs €4.71
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
158400225
Material: Polipropilena
PN: 16 Bar
pcs €6.59
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
158400226
Material: Polipropilena
PN: 16 Bar
pcs €11.89
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
158400227
Material: Polipropilena
PN: 16 Bar
pcs €15.78
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
158400228
Material: Polipropilena
PN: 16 Bar
pcs €23.20
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
158400229
Material: Polipropilena
PN: 16 Bar
pcs €36.46
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
158400230
Material: Polipropilena
PN: 16 Bar
pcs €55.73
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
158400231
Material: Polipropilena
PN: 16 Bar
pcs €118.75
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 158400354
D: 16 mm
Ships in 10-15 days
€7.01 / pcs
SKU: 158400223
D: 20 mm
Ships in 24 hours
€4.04 / pcs
SKU: 158400224
D: 25 mm
Ships in 24 hours
€4.71 / pcs
SKU: 158400225
D: 32 mm
Ships in 24 hours
€6.59 / pcs
SKU: 158400226
D: 40 mm
Ships in 24 hours
€11.89 / pcs
SKU: 158400227
D: 50 mm
Ships in 24 hours
€15.78 / pcs
SKU: 158400228
D: 63 mm
Ships in 24 hours
€23.20 / pcs
SKU: 158400229
D: 75 mm
Ships in 24 hours
€36.46 / pcs
SKU: 158400230
D: 90 mm
Ships in 24 hours
€55.73 / pcs
SKU: 158400231
D: 110 mm
Ships in 24 hours
€118.75 / pcs