Transition elbow 90 degrees PE100 to brass female thread d32-d63
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ELGEF Plus 90-degree PE100 to brass female thread transition elbow provides a permanent, leak-tight connection between polyethylene pipelines and threaded metal equipment. Designed for utility and industrial networks, this SDR11 electrofusion fitting operates at pressures up to 16 bar for water and 10 bar for gas. It enables clean directional transitions from metric PE-HD pipework to threaded valves, pumps, water meters, and service manifolds across diameters from d32 to d63 mm.
Technical specifications
The ELGEF Plus transition elbow combines an electrofusion socket with an integrated female parallel thread insert to facilitate safe directional changes. Engineered for robust performance across utility infrastructure, the SDR11 fitting maintains full pressure integrity under demanding dynamic loads.
- Nominal pressure: 16 bar for water applications and 10 bar for combustible gas systems
- Standard dimension ratio: SDR11 rating suited for standard PE100 distribution networks
- Thread interface: Precision-machined parallel female thread (Rp) from 1" to 2"
- Welding terminals: Standard 4 mm connector pins with limited-path fusion indicators
- Size range: Metric outer diameters from d32 mm up to d63 mm
- Expected service life: Designed for an operating lifespan of up to 100 years
Materials and standards
Each fitting is produced using virgin, fully compounded PE100 polyethylene resin paired with a dezincification-resistant brass threaded insert. This material pairing prevents internal galvanic corrosion and delivers exceptional resistance against chemical degradation, encrustation, and slow crack growth.
Manufactured in Switzerland by Georg Fischer, the ELGEF Plus system strictly adheres to EN 12201-1 for potable water supply and EN 1555-3 for natural gas distribution. The components hold international hygiene and safety certifications including DVGW, KIWA, SVGW, and ACS, ensuring compliance with rigorous municipal water and gas utility mandates.
Installation and jointing
The electrofusion socket is equipped with integral pipe fixation that secures the PE100 pipe during fusion, preventing movement during the heating and cooling cycles. Embedded heating coils ensure uniform energy input across the fusion zone for consistent, homogeneous joint quality.
Installers must peel the pipe surface to remove oxidized outer layers and clean joint areas thoroughly prior to electrofusion welding. When connecting the metallic end to valves or manifolds, appropriate thread sealant must be applied without overtightening to safeguard the brass insert and maintain long-term system integrity.
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ELGEF Plus 90-degree PE100 to brass female thread transition elbow provides a permanent, leak-tight connection between polyethylene pipelines and threaded metal equipment. Designed for utility and industrial networks, this SDR11 electrofusion fitting operates at pressures up to 16 bar for water and 10 bar for gas. It enables clean directional transitions from metric PE-HD pipework to threaded valves, pumps, water meters, and service manifolds across diameters from d32 to d63 mm.
Technical specifications
The ELGEF Plus transition elbow combines an electrofusion socket with an integrated female parallel thread insert to facilitate safe directional changes. Engineered for robust performance across utility infrastructure, the SDR11 fitting maintains full pressure integrity under demanding dynamic loads.
- Nominal pressure: 16 bar for water applications and 10 bar for combustible gas systems
- Standard dimension ratio: SDR11 rating suited for standard PE100 distribution networks
- Thread interface: Precision-machined parallel female thread (Rp) from 1" to 2"
- Welding terminals: Standard 4 mm connector pins with limited-path fusion indicators
- Size range: Metric outer diameters from d32 mm up to d63 mm
- Expected service life: Designed for an operating lifespan of up to 100 years
Materials and standards
Each fitting is produced using virgin, fully compounded PE100 polyethylene resin paired with a dezincification-resistant brass threaded insert. This material pairing prevents internal galvanic corrosion and delivers exceptional resistance against chemical degradation, encrustation, and slow crack growth.
Manufactured in Switzerland by Georg Fischer, the ELGEF Plus system strictly adheres to EN 12201-1 for potable water supply and EN 1555-3 for natural gas distribution. The components hold international hygiene and safety certifications including DVGW, KIWA, SVGW, and ACS, ensuring compliance with rigorous municipal water and gas utility mandates.
Installation and jointing
The electrofusion socket is equipped with integral pipe fixation that secures the PE100 pipe during fusion, preventing movement during the heating and cooling cycles. Embedded heating coils ensure uniform energy input across the fusion zone for consistent, homogeneous joint quality.
Installers must peel the pipe surface to remove oxidized outer layers and clean joint areas thoroughly prior to electrofusion welding. When connecting the metallic end to valves or manifolds, appropriate thread sealant must be applied without overtightening to safeguard the brass insert and maintain long-term system integrity.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
32 mm
Thread
1"
|
720100258 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €50.38 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
Thread
1 1/4"
|
720100259 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €59.06 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
Thread
1 1/2"
|
720100260 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €65.82 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
1"
|
720100281 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €85.47 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
1 1/4"
|
720100282 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €85.47 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
1 1/2"
|
720100283 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €85.47 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
2"
|
720100261 |
Material: Polyethylene
PN: 16 Bar
SDR: 11
|
pcs | €81.87 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|