Elbow 45 degrees PVDF SYGEF Standard SDR33 PN10 d90-225
The Georg Fischer SYGEF Standard 45 degrees elbow SDR33 PN10 is an injection moulded PVDF pipe fitting engineered for directional changes in chemical process lines and high-purity fluid distribution systems. Dimensioned to ISO 10931 across outside diameters d90 to d225 mm, this component delivers dependable 10 bar pressure containment at 20 degrees Celsius. BigWeld supplies this fluoropolymer fitting to process engineers and industrial installers demanding exceptional chemical resistance across operating temperatures from -20 to +140 degrees Celsius.
Technical specifications
This 45 degrees fitting provides precise flow redirection while minimising local hydraulic pressure losses and particle hold-up in large-bore process piping. The smooth internal bore maintains an average roughness of Ra ≤ 0.5 µm, which deters biofilm formation and facilitates thorough clean-in-place cycles.
- System and material: Georg Fischer SYGEF Standard, PVDF (polyvinylidene fluoride)
- Standard and pressure rating: ISO 10931, SDR33 / PN10 (10 bar at 20 degrees Celsius)
- Size range and geometry: d90 mm to d225 mm spigot ends, 45 degrees elbow
- Service temperature: -20 degrees Celsius to +140 degrees Celsius
- Mechanical properties: Yield stress ≥ 48 N/mm² at 23 degrees Celsius, melting point > 175 degrees Celsius
- Surface quality: Bore roughness Ra ≤ 0.5 µm for laminar flow and cleanability
Materials and standards
Fabricated from virgin polyvinylidene fluoride, the SYGEF Standard compound withstands concentrated mineral acids, harsh oxidising agents, and organic solvents. It resists up to 96% sulfuric acid, 65% nitric acid, 30% hydrochloric acid, and 75% hydrofluoric acid, but is incompatible with inorganic and organic bases as well as aldehydes.
The raw polymer satisfies FDA 21 CFR 177.2510 requirements for food contact and complies with USP Class VI physiological non-toxicity standards. The fitting safely tolerates demanding decontamination protocols, including periodic steam sterilisation, ozone dosing, chemical sanitisation, and continuous hot water sanitisation. Quality documentation, including EN 10204 2.2 test reports and 3.1 inspection certificates, is available upon request.
Installation and jointing
Large-diameter SYGEF Standard fittings are designed specifically for automated infrared fusion and conventional heated tool butt fusion. IR Plus non-contact heating per DVS 2207 Part 6 prevents heater plate contamination and generates compact, reproducible weld beads that preserve flow efficiency.
Where infrared fusion machinery is unavailable, conventional butt fusion according to DVS 2207 Part 15 provides an approved alternative for pipeline fabrication. Installers must account for thermal expansion by positioning pipe clips and axial guides according to engineering layouts, ensuring stress-free alignment prior to initiating automated welding cycles.
The Georg Fischer SYGEF Standard 45 degrees elbow SDR33 PN10 is an injection moulded PVDF pipe fitting engineered for directional changes in chemical process lines and high-purity fluid distribution systems. Dimensioned to ISO 10931 across outside diameters d90 to d225 mm, this component delivers dependable 10 bar pressure containment at 20 degrees Celsius. BigWeld supplies this fluoropolymer fitting to process engineers and industrial installers demanding exceptional chemical resistance across operating temperatures from -20 to +140 degrees Celsius.
Technical specifications
This 45 degrees fitting provides precise flow redirection while minimising local hydraulic pressure losses and particle hold-up in large-bore process piping. The smooth internal bore maintains an average roughness of Ra ≤ 0.5 µm, which deters biofilm formation and facilitates thorough clean-in-place cycles.
- System and material: Georg Fischer SYGEF Standard, PVDF (polyvinylidene fluoride)
- Standard and pressure rating: ISO 10931, SDR33 / PN10 (10 bar at 20 degrees Celsius)
- Size range and geometry: d90 mm to d225 mm spigot ends, 45 degrees elbow
- Service temperature: -20 degrees Celsius to +140 degrees Celsius
- Mechanical properties: Yield stress ≥ 48 N/mm² at 23 degrees Celsius, melting point > 175 degrees Celsius
- Surface quality: Bore roughness Ra ≤ 0.5 µm for laminar flow and cleanability
Materials and standards
Fabricated from virgin polyvinylidene fluoride, the SYGEF Standard compound withstands concentrated mineral acids, harsh oxidising agents, and organic solvents. It resists up to 96% sulfuric acid, 65% nitric acid, 30% hydrochloric acid, and 75% hydrofluoric acid, but is incompatible with inorganic and organic bases as well as aldehydes.
The raw polymer satisfies FDA 21 CFR 177.2510 requirements for food contact and complies with USP Class VI physiological non-toxicity standards. The fitting safely tolerates demanding decontamination protocols, including periodic steam sterilisation, ozone dosing, chemical sanitisation, and continuous hot water sanitisation. Quality documentation, including EN 10204 2.2 test reports and 3.1 inspection certificates, is available upon request.
Installation and jointing
Large-diameter SYGEF Standard fittings are designed specifically for automated infrared fusion and conventional heated tool butt fusion. IR Plus non-contact heating per DVS 2207 Part 6 prevents heater plate contamination and generates compact, reproducible weld beads that preserve flow efficiency.
Where infrared fusion machinery is unavailable, conventional butt fusion according to DVS 2207 Part 15 provides an approved alternative for pipeline fabrication. Installers must account for thermal expansion by positioning pipe clips and axial guides according to engineering layouts, ensuring stress-free alignment prior to initiating automated welding cycles.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
90 mm
|
735158513 |
Material: PVDF
PN: 10 Bar
|
pcs | €249.24 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
|
735158514 |
Material: PVDF
PN: 10 Bar
|
pcs | €434.12 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
125 mm
|
735158515 |
Material: PVDF
PN: 10 Bar
|
pcs | €597.89 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
140 mm
|
735158516 |
Material: PVDF
PN: 10 Bar
|
pcs | €765.11 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
|
735158517 |
Material: PVDF
PN: 10 Bar
|
pcs | €918.16 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
200 mm
|
735158519 |
Material: PVDF
PN: 10 Bar
|
pcs | €1,131.68 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
225 mm
|
735158520 |
Material: PVDF
PN: 10 Bar
|
pcs | €1,434.16 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|