PVC-A PN20 Pressure Pipe 50-315 mm
The LaReTer PVC-A PN20 pressure pipe is an engineered polymeric alloy pipeline designed for high-pressure potable water mains, pressurized irrigation networks, and industrial process fluid distribution. Manufactured from unplasticized PVC modified with chlorinated polyethylene, it combines high ring stiffness with ductile crack arrest. Supplied in 6-meter lengths with an integrated Power-Lock socket, it delivers dependable PN 20 pressure performance across nominal outside diameters from 50 mm to 315 mm.
Technical specifications
The PVC-A PN20 pipe provides a nominal pressure rating of 20 bar at 20 degrees Celsius alongside a high annular ring stiffness of SN 40 kN/m². This robust structural strength enables safe underground installation in deep trenches subjected to significant dynamic earth and traffic loads.
Continuous operation is rated up to 60 degrees Celsius, with thermal derating according to DIN 8061-62 maintaining 10 bar at 40 degrees Celsius and 3 bar at 60 degrees Celsius. The interior surface possesses an absolute hydraulic roughness of k = 0.003 mm, yielding larger flow cross-sections and substantially lower friction losses than high-density polyethylene of equivalent outside diameter and pressure class.
- Nominal working pressure: PN 20 bar at 20 degrees Celsius (derated to 10 bar at 40 degrees Celsius and 3 bar at 60 degrees Celsius per DIN 8061-62).
- Annular ring stiffness: SN 40 kN/m² for high ground load resistance.
- Vacuum capability: Full negative pressure tightness verified down to minus 0.5 bar.
- Hydraulic roughness: k = 0.003 mm for low head loss and reduced pumping energy.
- Supply format: 6000 mm overall pipe lengths including integrated thermoformed socket.
Materials and standards
This pipe is extruded from a homogeneous PVC-A polymeric alloy that blends unplasticized polyvinyl chloride with chlorinated polyethylene impact modifiers. The formulation eliminates brittle failure modes by arresting crack propagation under concentrated point impact or surface scratching.
The material is approximately 25% lighter than equivalent PN-rated polyethylene, lowering handling weight while meeting strict European quality criteria. It holds KIWA TIC certification under KQ KIWA QUALITY KIP-105133 and complies with Italian Ministerial Decree DM n° 174 of 06/04/2004 for contact with potable water intended for human consumption, alongside physical testing under ISO 1183, EN ISO 6259-1, and UNI EN 1452.
Installation and jointing
Push-fit connection is executed using an integrally thermoformed socket equipped with a factory pre-inserted Forsheda Power-Lock seal. The co-molded yellow polypropylene retaining ring locks the EPDM elastomer permanently into the groove, preventing gasket displacement or fishmouthing during assembly.
Compliant with UNI EN 681-1, the EPDM elastomer guarantees hermetic sealing under positive internal pressure and negative vacuum down to minus 0.5 bar. The flexible socket geometry accommodates angular deflections up to 3 degrees without loss of tightness, effectively absorbing minor soil settlement, thermal variations, and ground movement along the pipeline alignment.
The LaReTer PVC-A PN20 pressure pipe is an engineered polymeric alloy pipeline designed for high-pressure potable water mains, pressurized irrigation networks, and industrial process fluid distribution. Manufactured from unplasticized PVC modified with chlorinated polyethylene, it combines high ring stiffness with ductile crack arrest. Supplied in 6-meter lengths with an integrated Power-Lock socket, it delivers dependable PN 20 pressure performance across nominal outside diameters from 50 mm to 315 mm.
Technical specifications
The PVC-A PN20 pipe provides a nominal pressure rating of 20 bar at 20 degrees Celsius alongside a high annular ring stiffness of SN 40 kN/m². This robust structural strength enables safe underground installation in deep trenches subjected to significant dynamic earth and traffic loads.
Continuous operation is rated up to 60 degrees Celsius, with thermal derating according to DIN 8061-62 maintaining 10 bar at 40 degrees Celsius and 3 bar at 60 degrees Celsius. The interior surface possesses an absolute hydraulic roughness of k = 0.003 mm, yielding larger flow cross-sections and substantially lower friction losses than high-density polyethylene of equivalent outside diameter and pressure class.
- Nominal working pressure: PN 20 bar at 20 degrees Celsius (derated to 10 bar at 40 degrees Celsius and 3 bar at 60 degrees Celsius per DIN 8061-62).
- Annular ring stiffness: SN 40 kN/m² for high ground load resistance.
- Vacuum capability: Full negative pressure tightness verified down to minus 0.5 bar.
- Hydraulic roughness: k = 0.003 mm for low head loss and reduced pumping energy.
- Supply format: 6000 mm overall pipe lengths including integrated thermoformed socket.
Materials and standards
This pipe is extruded from a homogeneous PVC-A polymeric alloy that blends unplasticized polyvinyl chloride with chlorinated polyethylene impact modifiers. The formulation eliminates brittle failure modes by arresting crack propagation under concentrated point impact or surface scratching.
The material is approximately 25% lighter than equivalent PN-rated polyethylene, lowering handling weight while meeting strict European quality criteria. It holds KIWA TIC certification under KQ KIWA QUALITY KIP-105133 and complies with Italian Ministerial Decree DM n° 174 of 06/04/2004 for contact with potable water intended for human consumption, alongside physical testing under ISO 1183, EN ISO 6259-1, and UNI EN 1452.
Installation and jointing
Push-fit connection is executed using an integrally thermoformed socket equipped with a factory pre-inserted Forsheda Power-Lock seal. The co-molded yellow polypropylene retaining ring locks the EPDM elastomer permanently into the groove, preventing gasket displacement or fishmouthing during assembly.
Compliant with UNI EN 681-1, the EPDM elastomer guarantees hermetic sealing under positive internal pressure and negative vacuum down to minus 0.5 bar. The flexible socket geometry accommodates angular deflections up to 3 degrees without loss of tightness, effectively absorbing minor soil settlement, thermal variations, and ground movement along the pipeline alignment.
| Size | SKU | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|
|
D
50 mm
|
139627 | m | €5.09 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
|
139628 | m | €8.07 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
|
139629 | m | €14.82 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
|
139630 | m | €18.53 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
125 mm
|
139631 | m | €23.82 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
140 mm
|
139632 | m | €29.87 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
|
139633 | m | €39.01 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
200 mm
|
139634 | m | €60.81 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
225 mm
|
139635 | m | €77.00 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
250 mm
|
139636 | m | €93.59 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
280 mm
|
139637 | m | €118.13 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
315 mm
|
139638 | m | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|