Blue PVC-A PN10 pressure pipe with a 10 Bar socket end.

PVC-A Pressure Pipe PN10 63-500 mm with Socket Joint

Material: PVC-A PN: 10 Bar

The LaReTer PVC-A PN10 pressure pipe is an engineered polymeric alloy pipeline designed for pressurized fluid conveyance in municipal potable water, industrial processing, and utility networks. Combining unplasticized polyvinyl chloride with chlorinated polyethylene, it prevents brittle fracture under concentrated loads and crack propagation. Designed with an integral socket and factory-fitted gasket, this 6-meter pipe range spans outside diameters from 63 mm to 500 mm for reliable buried infrastructure.

Technical specifications

Rated for an operating pressure of 10 bar at 20 degrees C, the pipe provides superior hydraulic capacity due to its optimized wall geometry. The increased internal bore compared to PE100 or conventional PVC-U of equivalent outside diameter lowers head loss and minimizes long-term pumping energy costs.

  • Nominal pressure rating: PN 10 (10 bar at 20 degrees C, operational up to 60 degrees C)
  • Ring stiffness: SN 5 kN/m2 for buried pressure mains and gravity systems
  • Vacuum tightness: Certified negative pressure resistance down to -0.5 bar
  • Roughness coefficient: Absolute hydraulic roughness k = 0.003 mm
  • Standard length and color: 6,000 mm overall length in blue RAL 5015
  • Dimensional span: Outside diameters from 63 mm up to 500 mm

Materials and standards

Manufactured from a high-performance polymeric alloy, PVC-A incorporates chlorinated polyethylene to eliminate ductile-to-brittle transition risks. The material formulation resists chemical attack, internal abrasion, and environmental stress cracking over an operational lifespan exceeding 50 years.

The pipe system complies with rigorous European standards, including product testing under KIWA Quality KIP-105133 and manufacturing requirements conforming to UNI EN 1452. For potable water transport, the alloy is certified according to Italian Ministerial Decree DM 174/2004 and healthcare circulars. Thermal derating follows DIN 8061-62 guidelines up to the maximum operating limit of 60 degrees C.

Installation and jointing

Joint integrity is achieved through an integral socket pre-fitted with the Forsheda Power-Lock mechanical gasket system. The dual-element gasket combines an EPDM elastomer body conforming to EN 681-1 with a co-molded yellow polypropylene retaining ring devoid of metallic components.

Because the seal is mechanically fixed into the socket groove during production, it cannot roll out, displace, or suffer contamination during assembly. The push-fit connection accommodates up to 3 degrees of angular deflection per joint, compensating for ground movement and gradual trench curvature. Weighing approximately 25% less than equivalent PE pipes, these pipes enable rapid handling and lower installation overheads across Europe through BigWeld.

The LaReTer PVC-A PN10 pressure pipe is an engineered polymeric alloy pipeline designed for pressurized fluid conveyance in municipal potable water, industrial processing, and utility networks. Combining unplasticized polyvinyl chloride with chlorinated polyethylene, it prevents brittle fracture under concentrated loads and crack propagation. Designed with an integral socket and factory-fitted gasket, this 6-meter pipe range spans outside diameters from 63 mm to 500 mm for reliable buried infrastructure.

Technical specifications

Rated for an operating pressure of 10 bar at 20 degrees C, the pipe provides superior hydraulic capacity due to its optimized wall geometry. The increased internal bore compared to PE100 or conventional PVC-U of equivalent outside diameter lowers head loss and minimizes long-term pumping energy costs.

  • Nominal pressure rating: PN 10 (10 bar at 20 degrees C, operational up to 60 degrees C)
  • Ring stiffness: SN 5 kN/m2 for buried pressure mains and gravity systems
  • Vacuum tightness: Certified negative pressure resistance down to -0.5 bar
  • Roughness coefficient: Absolute hydraulic roughness k = 0.003 mm
  • Standard length and color: 6,000 mm overall length in blue RAL 5015
  • Dimensional span: Outside diameters from 63 mm up to 500 mm

Materials and standards

Manufactured from a high-performance polymeric alloy, PVC-A incorporates chlorinated polyethylene to eliminate ductile-to-brittle transition risks. The material formulation resists chemical attack, internal abrasion, and environmental stress cracking over an operational lifespan exceeding 50 years.

The pipe system complies with rigorous European standards, including product testing under KIWA Quality KIP-105133 and manufacturing requirements conforming to UNI EN 1452. For potable water transport, the alloy is certified according to Italian Ministerial Decree DM 174/2004 and healthcare circulars. Thermal derating follows DIN 8061-62 guidelines up to the maximum operating limit of 60 degrees C.

Installation and jointing

Joint integrity is achieved through an integral socket pre-fitted with the Forsheda Power-Lock mechanical gasket system. The dual-element gasket combines an EPDM elastomer body conforming to EN 681-1 with a co-molded yellow polypropylene retaining ring devoid of metallic components.

Because the seal is mechanically fixed into the socket groove during production, it cannot roll out, displace, or suffer contamination during assembly. The push-fit connection accommodates up to 3 degrees of angular deflection per joint, compensating for ground movement and gradual trench curvature. Weighing approximately 25% less than equivalent PE pipes, these pipes enable rapid handling and lower installation overheads across Europe through BigWeld.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 63 mm
139584
Material: PVC-A
PN: 10 Bar
m €3.44
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
139585
Material: PVC-A
PN: 10 Bar
m €6.49
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
139586
Material: PVC-A
PN: 10 Bar
m €5.24
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 125 mm
139587
Material: PVC-A
PN: 10 Bar
m €7.87
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 140 mm
139588
Material: PVC-A
PN: 10 Bar
m €12.77
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 160 mm
139589
Material: PVC-A
PN: 10 Bar
m €16.73
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 200 mm
139590
Material: PVC-A
PN: 10 Bar
m €25.87
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 225 mm
139591
Material: PVC-A
PN: 10 Bar
m €32.49
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 250 mm
139592
Material: PVC-A
PN: 10 Bar
m €40.35
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 280 mm
139593
Material: PVC-A
PN: 10 Bar
m €53.47
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 315 mm
139594
Material: PVC-A
PN: 10 Bar
m €64.37
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 355 mm
139595
Material: PVC-A
PN: 10 Bar
m €90.88
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 400 mm
139596
Material: PVC-A
PN: 10 Bar
m €109.05
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 500 mm
139597
Material: PVC-A
PN: 10 Bar
m €171.57
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 139584
D: 63 mm
Ships in 24 hours
€3.44 / m
SKU: 139585
D: 90 mm
Ships in 24 hours
€6.49 / m
SKU: 139586
D: 110 mm
Ships in 24 hours
€5.24 / m
SKU: 139587
D: 125 mm
Ships in 24 hours
€7.87 / m
SKU: 139588
D: 140 mm
Ships in 24 hours
€12.77 / m
SKU: 139589
D: 160 mm
Ships in 24 hours
€16.73 / m
SKU: 139590
D: 200 mm
Ships in 24 hours
€25.87 / m
SKU: 139591
D: 225 mm
Ships in 24 hours
€32.49 / m
SKU: 139592
D: 250 mm
Ships in 24 hours
€40.35 / m
SKU: 139593
D: 280 mm
Ships in 24 hours
€53.47 / m
SKU: 139594
D: 315 mm
Ships in 24 hours
€64.37 / m
SKU: 139595
D: 355 mm
Ships in 24 hours
€90.88 / m
SKU: 139596
D: 400 mm
Ships in 24 hours
€109.05 / m
SKU: 139597
D: 500 mm
Ships in 24 hours
€171.57 / m