PVDF Ball valve type 181 100-230V
The Georg Fischer SYGEF Standard Type 181 electric ball valve provides automated on/off isolation in aggressive chemical process lines and high-purity water distribution systems. The body is moulded from unpigmented polyvinylidene fluoride with FKM seals and fusion socket ends from d16 to d110 mm. Rated at 10 bar (PN10) across a media temperature range of -20 to +140 degrees Celsius, it is intended for process engineers and industrial piping installers who need repeatable quarter-turn automation.
Technical specifications
A high-torque electric actuator supplied with 100-230V drives the quarter-turn movement, while a sealed IP68 enclosure protects the drive components against water ingress and corrosive atmospheres. Position feedback and a mechanical override are integrated in the actuator housing.
- Supply voltage: 100-230V AC at 50-60 Hz, with an internal heating element that prevents condensation.
- Enclosure: IP68 housing with optical position indicator and integrated limit switches for remote feedback.
- Emergency operation: mechanical manual override for commissioning, servicing or loss of power.
- Operating limits: 10 bar (PN10) nominal pressure, media temperature -20 to +140 degrees Celsius.
- Mounting: moulded stainless steel threaded inserts in the base for bracket fixing without transmitting pipeline stress.
- Sizes: fusion socket bodies from d16 to d110 mm.
Materials and standards
Each SYGEF Standard body is precision moulded from thermally annealed virgin PVDF, a fluoropolymer with a density of about 1.78 g/cm3 and a melting point above 175 degrees Celsius, paired with FKM elastomer seals. The range follows ISO 10931 dimensional requirements.
PVDF is resistant to oxidizing acids such as nitric and sulphuric acid, to non-oxidizing acids, salts, alcohols and aliphatic hydrocarbons, and only conditionally resistant to halogens, ketones and chlorinated hydrocarbons. It is not resistant to inorganic or organic bases such as sodium hydroxide, nor to aldehydes; these media must be excluded at design stage. The unpigmented compound has an inner surface roughness of Ra 0.5 micrometres or less, which limits biofilm growth and particle release in deionized and purified water.
Installation and jointing
The valve is joined to SYGEF pipe by heated tool socket fusion to DVS 2207 Part 15, giving a homogeneous, non-detachable connection without adhesives or additional sealing elements.
Pipe material is stress-relieved by thermal annealing, with internal stress of 2.5 N/mm2 or less, so welds remain dimensionally stable. With a thermal expansion coefficient of 0.12 to 0.18 mm/(m.K), the layout must absorb length changes through flexible legs or anchors; the stainless steel inserts in the valve base allow the unit to be fixed to a bracket so that pipeline loads are not carried by the actuator. The override permits manual operation while the control circuit is still being commissioned.
The Georg Fischer SYGEF Standard Type 181 electric ball valve provides automated on/off isolation in aggressive chemical process lines and high-purity water distribution systems. The body is moulded from unpigmented polyvinylidene fluoride with FKM seals and fusion socket ends from d16 to d110 mm. Rated at 10 bar (PN10) across a media temperature range of -20 to +140 degrees Celsius, it is intended for process engineers and industrial piping installers who need repeatable quarter-turn automation.
Technical specifications
A high-torque electric actuator supplied with 100-230V drives the quarter-turn movement, while a sealed IP68 enclosure protects the drive components against water ingress and corrosive atmospheres. Position feedback and a mechanical override are integrated in the actuator housing.
- Supply voltage: 100-230V AC at 50-60 Hz, with an internal heating element that prevents condensation.
- Enclosure: IP68 housing with optical position indicator and integrated limit switches for remote feedback.
- Emergency operation: mechanical manual override for commissioning, servicing or loss of power.
- Operating limits: 10 bar (PN10) nominal pressure, media temperature -20 to +140 degrees Celsius.
- Mounting: moulded stainless steel threaded inserts in the base for bracket fixing without transmitting pipeline stress.
- Sizes: fusion socket bodies from d16 to d110 mm.
Materials and standards
Each SYGEF Standard body is precision moulded from thermally annealed virgin PVDF, a fluoropolymer with a density of about 1.78 g/cm3 and a melting point above 175 degrees Celsius, paired with FKM elastomer seals. The range follows ISO 10931 dimensional requirements.
PVDF is resistant to oxidizing acids such as nitric and sulphuric acid, to non-oxidizing acids, salts, alcohols and aliphatic hydrocarbons, and only conditionally resistant to halogens, ketones and chlorinated hydrocarbons. It is not resistant to inorganic or organic bases such as sodium hydroxide, nor to aldehydes; these media must be excluded at design stage. The unpigmented compound has an inner surface roughness of Ra 0.5 micrometres or less, which limits biofilm growth and particle release in deionized and purified water.
Installation and jointing
The valve is joined to SYGEF pipe by heated tool socket fusion to DVS 2207 Part 15, giving a homogeneous, non-detachable connection without adhesives or additional sealing elements.
Pipe material is stress-relieved by thermal annealing, with internal stress of 2.5 N/mm2 or less, so welds remain dimensionally stable. With a thermal expansion coefficient of 0.12 to 0.18 mm/(m.K), the layout must absorb length changes through flexible legs or anchors; the stainless steel inserts in the valve base allow the unit to be fixed to a bracket so that pipeline loads are not carried by the actuator. The override permits manual operation while the control circuit is still being commissioned.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
16 mm
|
199181012 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €1,695.79 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
20 mm
|
199181013 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €1,710.87 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
|
199181014 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €1,771.11 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
|
199181015 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €1,864.88 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
|
199181016 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €2,517.73 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
|
199181017 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €2,239.83 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
|
199181018 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €2,546.22 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
|
199181019 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €4,072.94 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
|
199181020 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €4,888.15 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
|
199181021 |
Material: PVDF
Gasket: FKM
PN: 10 Bar
|
pcs | €5,619.71 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|