PP-H Pneumatic Ball Valve PROGEF 546 Pro FO SDR11
The Georg Fischer PROGEF Standard Type 546 Pro pneumatic ball valve is an engineered quarter-turn automated assembly for process control and chemical piping systems. As an authorised Georg Fischer distributor, BigWeld supplies this high-performance valve configured in fail-safe-to-open (FO) mode with long SDR11 butt fusion spigots. Engineered for harsh industrial environments, the valve provides reliable automated shutoff and isolation across operating pressures up to 10 bar.
Technical specifications
The pneumatic actuator operates on a standard 5.6 bar control air supply and utilizes mechanical spring return to drive the valve into the open position upon loss of pilot air. Rapid cycle times of 1 to 2 seconds provide swift response in automated control loops, preventing upstream pressure accumulation.
- Actuation mode: Fail-safe-to-open (FO / single-acting spring return) with optical position indicator.
- Nominal pressure rating: PN10 (10 bar) at 20 degrees Celsius across the entire dimensional range.
- Control air pressure: Standard operating pilot pressure of 5.6 bar with integrated emergency manual override.
- Accessory mounting: Standardized VDI/VDE 3845 NAMUR interface for direct solenoid and switchbox attachment.
- Tightness class: Leak rate A bidirectional shutoff verified according to ISO 9393-2 and EN 12266 standards.
Materials and standards
The valve body and spigots are manufactured from premium beta polypropylene homopolymer (beta PP-H), paired with an actuator housed in flame-retardant glass-fibre reinforced polypropylene. Pure PTFE ball seats backed by elastomeric EPDM or FKM sealing rings deliver continuous chemical inertness and leak-tight operation.
Designed for an operational service lifespan of 25 years with water at 20 degrees Celsius, beta PP-H ensures high impact strength and resilience against aggressive acids, alkalis, and elevated process temperatures. The actuator housing in PP-GF resists external chemical washdowns and corrosive industrial atmospheres without degrading. Integrated stainless steel threaded inserts in the base allow secure anchoring to pipe brackets without transferring mechanical stress to the valve body.
Installation and jointing
Elongated SDR11 spigots facilitate direct welding into metric industrial pipelines using butt fusion or infrared fusion equipment. The spigot design ensures uniform heat distribution and maintains strict dimensional tolerances during the fusion jointing cycle.
The spigots are fully compatible with heated-tool butt welding as well as contactless automated infrared (IR-Plus) fusion systems. A blow-out-proof safety stem ensures operator safety under full line pressure, while the double union design allows easy replacement or servicing of sealing components without dismantling surrounding pipe segments.
The Georg Fischer PROGEF Standard Type 546 Pro pneumatic ball valve is an engineered quarter-turn automated assembly for process control and chemical piping systems. As an authorised Georg Fischer distributor, BigWeld supplies this high-performance valve configured in fail-safe-to-open (FO) mode with long SDR11 butt fusion spigots. Engineered for harsh industrial environments, the valve provides reliable automated shutoff and isolation across operating pressures up to 10 bar.
Technical specifications
The pneumatic actuator operates on a standard 5.6 bar control air supply and utilizes mechanical spring return to drive the valve into the open position upon loss of pilot air. Rapid cycle times of 1 to 2 seconds provide swift response in automated control loops, preventing upstream pressure accumulation.
- Actuation mode: Fail-safe-to-open (FO / single-acting spring return) with optical position indicator.
- Nominal pressure rating: PN10 (10 bar) at 20 degrees Celsius across the entire dimensional range.
- Control air pressure: Standard operating pilot pressure of 5.6 bar with integrated emergency manual override.
- Accessory mounting: Standardized VDI/VDE 3845 NAMUR interface for direct solenoid and switchbox attachment.
- Tightness class: Leak rate A bidirectional shutoff verified according to ISO 9393-2 and EN 12266 standards.
Materials and standards
The valve body and spigots are manufactured from premium beta polypropylene homopolymer (beta PP-H), paired with an actuator housed in flame-retardant glass-fibre reinforced polypropylene. Pure PTFE ball seats backed by elastomeric EPDM or FKM sealing rings deliver continuous chemical inertness and leak-tight operation.
Designed for an operational service lifespan of 25 years with water at 20 degrees Celsius, beta PP-H ensures high impact strength and resilience against aggressive acids, alkalis, and elevated process temperatures. The actuator housing in PP-GF resists external chemical washdowns and corrosive industrial atmospheres without degrading. Integrated stainless steel threaded inserts in the base allow secure anchoring to pipe brackets without transferring mechanical stress to the valve body.
Installation and jointing
Elongated SDR11 spigots facilitate direct welding into metric industrial pipelines using butt fusion or infrared fusion equipment. The spigot design ensures uniform heat distribution and maintains strict dimensional tolerances during the fusion jointing cycle.
The spigots are fully compatible with heated-tool butt welding as well as contactless automated infrared (IR-Plus) fusion systems. A blow-out-proof safety stem ensures operator safety under full line pressure, while the double union design allows easy replacement or servicing of sealing components without dismantling surrounding pipe segments.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
Gasket
EPDM
|
199251643 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
20 mm
Gasket
FKM
|
199251653 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
Gasket
EPDM
|
199251644 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
Gasket
FKM
|
199251654 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
Gasket
EPDM
|
199251645 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
Gasket
FKM
|
199251655 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
Gasket
EPDM
|
199251646 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
Gasket
FKM
|
199251656 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
Gasket
EPDM
|
199251647 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
Gasket
FKM
|
199251657 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Gasket
EPDM
|
199251648 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Gasket
FKM
|
199251658 |
Material: PP-H
PN: 10
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|