Pneumatic PVC-U ball valve Type 230 DA PN10

Pneumatic PVC-U ball valve Type 230 DA PN10

Material: PVC-U PN: 10 Bar

  Datasheet (PDF)

The Georg Fischer Type 230 DA is an industrial pneumatically actuated PVC-U ball valve engineered for automated process isolation in chemical lines, industrial water treatment, and cooling systems. Built around a double-acting pneumatic actuator, the unit utilises compressed air to power both opening and closing cycles without relying on mechanical return springs. Rated for nominal operating pressures up to 10 bar at 20 degrees Celsius, it provides fast, reliable quarter-turn operation across metric pipe sizes from d16 up to d110 mm.

Technical specifications

The pneumatic actuator assembly delivers controlled quarter-turn actuation with rotation speeds of 1 to 2 seconds under standard control air pressures. Actuator sizing is matched to valve torque demands across the entire diameter span to guarantee operational dependability.

  • Actuation principle: double-acting pneumatic drive without internal mechanical springs
  • Cycle speed: 90 degrees rotation completed within 1 to 2 seconds
  • Nominal pressure rating: 10 bar (PN10) at a reference temperature of 20 degrees Celsius
  • Actuator sizing: PA11 (DN10 to DN25), PA21 (DN32 to DN50), PA35 (DN65), PA40 (DN80), and PA45 (DN100)
  • Connection type: metric solvent cement socket union ends from d16 up to d110 mm
  • Mounting interface: integrated stainless steel threaded inserts for rigid pipe bracket anchoring

The integrated stainless steel inserts protect the thermoplastic valve body from mechanical stresses during continuous cycling and vibration. Radial installation and removal are simplified by the true union design, which enables inline servicing without disturbing existing solvent-welded pipework.

Materials and standards

Engineered from unplasticised polyvinyl chloride (PVC-U), the valve body delivers high structural stiffness and broad chemical resistance against inorganic acids, alkalis, and saline media. Ball sealing seats manufactured from pure PTFE provide exceptionally low frictional torque and long-term wear resistance during rigorous automated duty cycles.

All valve components comply with metric industrial piping standards for solvent cement socket jointing. The PVC-U formulation maintains high dimensional stability within ambient and fluid process limits, while internal elastomer seals ensure bubble-tight shutoff across the entire PN10 pressure envelope.

Applications

The Type 230 DA automated ball valve is engineered for demanding fluid management duties where rapid, repeatable isolation is required. It is widely specified across automated water treatment plants, chemical transfer manifolds, industrial cooling circuits, and effluent neutralization facilities handling non-viscous chemical media.

  Datasheet (PDF)

The Georg Fischer Type 230 DA is an industrial pneumatically actuated PVC-U ball valve engineered for automated process isolation in chemical lines, industrial water treatment, and cooling systems. Built around a double-acting pneumatic actuator, the unit utilises compressed air to power both opening and closing cycles without relying on mechanical return springs. Rated for nominal operating pressures up to 10 bar at 20 degrees Celsius, it provides fast, reliable quarter-turn operation across metric pipe sizes from d16 up to d110 mm.

Technical specifications

The pneumatic actuator assembly delivers controlled quarter-turn actuation with rotation speeds of 1 to 2 seconds under standard control air pressures. Actuator sizing is matched to valve torque demands across the entire diameter span to guarantee operational dependability.

  • Actuation principle: double-acting pneumatic drive without internal mechanical springs
  • Cycle speed: 90 degrees rotation completed within 1 to 2 seconds
  • Nominal pressure rating: 10 bar (PN10) at a reference temperature of 20 degrees Celsius
  • Actuator sizing: PA11 (DN10 to DN25), PA21 (DN32 to DN50), PA35 (DN65), PA40 (DN80), and PA45 (DN100)
  • Connection type: metric solvent cement socket union ends from d16 up to d110 mm
  • Mounting interface: integrated stainless steel threaded inserts for rigid pipe bracket anchoring

The integrated stainless steel inserts protect the thermoplastic valve body from mechanical stresses during continuous cycling and vibration. Radial installation and removal are simplified by the true union design, which enables inline servicing without disturbing existing solvent-welded pipework.

Materials and standards

Engineered from unplasticised polyvinyl chloride (PVC-U), the valve body delivers high structural stiffness and broad chemical resistance against inorganic acids, alkalis, and saline media. Ball sealing seats manufactured from pure PTFE provide exceptionally low frictional torque and long-term wear resistance during rigorous automated duty cycles.

All valve components comply with metric industrial piping standards for solvent cement socket jointing. The PVC-U formulation maintains high dimensional stability within ambient and fluid process limits, while internal elastomer seals ensure bubble-tight shutoff across the entire PN10 pressure envelope.

Applications

The Type 230 DA automated ball valve is engineered for demanding fluid management duties where rapid, repeatable isolation is required. It is widely specified across automated water treatment plants, chemical transfer manifolds, industrial cooling circuits, and effluent neutralization facilities handling non-viscous chemical media.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 16 mm
199230202
Material: PVC-U
PN: 10 Bar
pcs €480.50
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 20 mm
199230203
Material: PVC-U
PN: 10 Bar
pcs €483.13
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
199230204
Material: PVC-U
PN: 10 Bar
pcs €493.26
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
199230205
Material: PVC-U
PN: 10 Bar
pcs €505.28
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
199230206
Material: PVC-U
PN: 10 Bar
pcs €593.44
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
199230207
Material: PVC-U
PN: 10 Bar
pcs €621.48
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
199230208
Material: PVC-U
PN: 10 Bar
pcs €654.63
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
199230209
Material: PVC-U
PN: 10 Bar
pcs €1,126.49
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
199230210
Material: PVC-U
PN: 10 Bar
pcs €1,380.10
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
199230211
Material: PVC-U
PN: 10 Bar
pcs €1,654.59
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 199230202
D: 16 mm
Ships in 24 hours
€480.50 / pcs
SKU: 199230203
D: 20 mm
Ships in 24 hours
€483.13 / pcs
SKU: 199230204
D: 25 mm
Ships in 24 hours
€493.26 / pcs
SKU: 199230205
D: 32 mm
Ships in 24 hours
€505.28 / pcs
SKU: 199230206
D: 40 mm
Ships in 24 hours
€593.44 / pcs
SKU: 199230207
D: 50 mm
Ships in 24 hours
€621.48 / pcs
SKU: 199230208
D: 63 mm
Ships in 24 hours
€654.63 / pcs
SKU: 199230209
D: 75 mm
Ships in 24 hours
€1,126.49 / pcs
SKU: 199230210
D: 90 mm
Ships in 24 hours
€1,380.10 / pcs
SKU: 199230211
D: 110 mm
Ships in 24 hours
€1,654.59 / pcs