PP Adaptor Bend to Steel Pipe DN 40/30 - 40/40
The PP adaptor bend to steel pipe DN 40/30 - 40/40 is an engineered polypropylene transition fitting designed for domestic and commercial soil, waste, and interior drainage installations. Configured to establish an airtight, watertight link between standard push-fit polypropylene discharge lines and metallic fixture connections or siphon discharge tubes, this component ensures directional transitions without requiring threading or chemical welding. Manufactured in compliance with SR EN 1451-1/2, it delivers long-term durability in gravity-fed discharge networks.
Technical specifications
This adaptor bend provides resilient fluid transport under continuous operating temperatures of up to 60 degrees Celsius and handles short-term surges reaching 95 degrees Celsius. Its smooth hydraulic interior and pre-fitted elastomeric sealing ring guarantee dependable leak-tightness across varied domestic and commercial wastewater chemistries.
- Material: High-grade grey unplasticized polypropylene (PP) compound
- Temperature rating: 60 degrees Celsius continuous, 95 degrees Celsius intermittent
- Chemical resistance: Broad pH tolerance spanning pH 2 to pH 12
- Sealing element: Factory-installed EPDM elastomeric socket seal
- Hydraulic roughness: Manning coefficient n = 0.01 to prevent deposit accumulation
- Impact resistance: Cold ambient temperature impact strength down to -15 degrees Celsius
Materials and standards
Manufactured from injection-moulded polypropylene compound, this fitting complies with the standardized requirements of SR EN 1451-1/2 and company standard SF 98/2017. The unplasticized thermoplastic structure provides high resistance to chemical corrosion, household detergents, laundry effluents, and caustic drain cleaning solutions.
The material formulation yields a raw material density of 0.95 g/cm³ and a tensile strength of 15 N/mm², with an elastic modulus of 1300 N/mm² that absorbs building movement, acoustic vibrations, and thermal stresses. The hydraulic inner bore maintains a constant Manning coefficient of 0.01 throughout an anticipated service life of at least 50 years, preventing limescale encrustation and biological fouling. Resistant to cold impact down to -15 degrees Celsius according to falling mass impact testing under SR EN 744, the fitting prevents stress-cracking during cold-weather handling and operational temperature fluctuations.
Installation and jointing
Assembly is carried out via a push-fit socket connection featuring an integrated EPDM elastomeric ring, eliminating the need for solvent cements or open flame heating. The fitting accommodates direct metallic siphon spigots or steel outlet conduits while securing flexible, stress-free absorption of thermal expansion.
Installers must lubricate the spigot bevel and elastomeric seal with an approved silicone assembly lubricant prior to insertion. Push-fit fittings must be pushed completely home into the socket seat without partial withdrawal, ensuring rigid angular alignment and lasting hydraulic integrity. When routing through wall chasings or structural partitions, the assembly must be protected against direct mortar contact and decoupled from rigid masonry using suitable acoustic sleeves or wrapping tapes. Direct solvent cementing, adhesive bonding, or heating of the polypropylene body is strictly prohibited.
The PP adaptor bend to steel pipe DN 40/30 - 40/40 is an engineered polypropylene transition fitting designed for domestic and commercial soil, waste, and interior drainage installations. Configured to establish an airtight, watertight link between standard push-fit polypropylene discharge lines and metallic fixture connections or siphon discharge tubes, this component ensures directional transitions without requiring threading or chemical welding. Manufactured in compliance with SR EN 1451-1/2, it delivers long-term durability in gravity-fed discharge networks.
Technical specifications
This adaptor bend provides resilient fluid transport under continuous operating temperatures of up to 60 degrees Celsius and handles short-term surges reaching 95 degrees Celsius. Its smooth hydraulic interior and pre-fitted elastomeric sealing ring guarantee dependable leak-tightness across varied domestic and commercial wastewater chemistries.
- Material: High-grade grey unplasticized polypropylene (PP) compound
- Temperature rating: 60 degrees Celsius continuous, 95 degrees Celsius intermittent
- Chemical resistance: Broad pH tolerance spanning pH 2 to pH 12
- Sealing element: Factory-installed EPDM elastomeric socket seal
- Hydraulic roughness: Manning coefficient n = 0.01 to prevent deposit accumulation
- Impact resistance: Cold ambient temperature impact strength down to -15 degrees Celsius
Materials and standards
Manufactured from injection-moulded polypropylene compound, this fitting complies with the standardized requirements of SR EN 1451-1/2 and company standard SF 98/2017. The unplasticized thermoplastic structure provides high resistance to chemical corrosion, household detergents, laundry effluents, and caustic drain cleaning solutions.
The material formulation yields a raw material density of 0.95 g/cm³ and a tensile strength of 15 N/mm², with an elastic modulus of 1300 N/mm² that absorbs building movement, acoustic vibrations, and thermal stresses. The hydraulic inner bore maintains a constant Manning coefficient of 0.01 throughout an anticipated service life of at least 50 years, preventing limescale encrustation and biological fouling. Resistant to cold impact down to -15 degrees Celsius according to falling mass impact testing under SR EN 744, the fitting prevents stress-cracking during cold-weather handling and operational temperature fluctuations.
Installation and jointing
Assembly is carried out via a push-fit socket connection featuring an integrated EPDM elastomeric ring, eliminating the need for solvent cements or open flame heating. The fitting accommodates direct metallic siphon spigots or steel outlet conduits while securing flexible, stress-free absorption of thermal expansion.
Installers must lubricate the spigot bevel and elastomeric seal with an approved silicone assembly lubricant prior to insertion. Push-fit fittings must be pushed completely home into the socket seat without partial withdrawal, ensuring rigid angular alignment and lasting hydraulic integrity. When routing through wall chasings or structural partitions, the assembly must be protected against direct mortar contact and decoupled from rigid masonry using suitable acoustic sleeves or wrapping tapes. Direct solvent cementing, adhesive bonding, or heating of the polypropylene body is strictly prohibited.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
40/30
|
SPPCT040X4030B |
Material: PP
For: Soil & waste
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40/40
|
SPPCT040X4040C |
Material: PP
For: Soil & waste
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|