Tee 45° equal PE100 SDR17 PN10 d90-110
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ELGEF Plus 45-degree equal tee in PE100 SDR17 is an injection-moulded spigot fitting engineered for municipal water distribution, industrial utility circuits, and natural gas supply lines. Designed with extended spigots to facilitate electrofusion or butt fusion jointing, this component establishes a smooth 45-degree branch to preserve flow velocity and mitigate pressure loss across pressurized pipeline infrastructure.
Technical specifications
This injection-moulded fitting complies with SDR17 dimensional standards, providing certified pressure performance for buried and above-ground thermoplastic piping systems. Its smooth bore minimizes wall friction and eliminates scaling or chemical encrustation across long operating lifecycles.
- Material: High-density polyethylene PE100 (black)
- Standard Dimension Ratio: SDR17
- Nominal pressure rating: PN10 bar (Water) / PN5 bar (Combustible Gas)
- Available diameter range: d90 mm (DN80) to d110 mm (DN100)
- Wall thickness: 5.4 mm (d90) and 6.6 mm (d110)
- Spigot straight length: 88 mm to 92 mm for secure fusion clamping
Applications
The ELGEF Plus 45-degree equal tee is deployed across municipal civil engineering projects, industrial utility loops, and utility fuel networks requiring directional branching with reduced turbulence. Sourced through an authorised Georg Fischer distributor, this component integrates with standardized PE100 infrastructure conveying potable water, treated technological effluents, or combustible fuel gases.
The 45-degree branch configuration reduces hydraulic resistance and flow turbulence compared to standard perpendicular tees, making it an ideal choice for pumping stations, gravity drainage bypasses, and high-velocity fluid transport systems where head loss minimization is critical.
Installation and jointing
Equipped with extended long spigot ends, the fitting accommodates standard electrofusion couplers as well as direct clamping in heated tool butt fusion machines according to DVS welding guidelines. The generous spigot length guarantees sufficient clearance for alignment clamps, scraping tools, and welding equipment.
Proper installation requires pipe ends to be scraped to remove the oxidized layer, cleaned with an approved polyethylene cleaner, and clamped without mechanical stress during the fusion and cooling phases to ensure a fully homogenous, leak-tight joint.
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ELGEF Plus 45-degree equal tee in PE100 SDR17 is an injection-moulded spigot fitting engineered for municipal water distribution, industrial utility circuits, and natural gas supply lines. Designed with extended spigots to facilitate electrofusion or butt fusion jointing, this component establishes a smooth 45-degree branch to preserve flow velocity and mitigate pressure loss across pressurized pipeline infrastructure.
Technical specifications
This injection-moulded fitting complies with SDR17 dimensional standards, providing certified pressure performance for buried and above-ground thermoplastic piping systems. Its smooth bore minimizes wall friction and eliminates scaling or chemical encrustation across long operating lifecycles.
- Material: High-density polyethylene PE100 (black)
- Standard Dimension Ratio: SDR17
- Nominal pressure rating: PN10 bar (Water) / PN5 bar (Combustible Gas)
- Available diameter range: d90 mm (DN80) to d110 mm (DN100)
- Wall thickness: 5.4 mm (d90) and 6.6 mm (d110)
- Spigot straight length: 88 mm to 92 mm for secure fusion clamping
Applications
The ELGEF Plus 45-degree equal tee is deployed across municipal civil engineering projects, industrial utility loops, and utility fuel networks requiring directional branching with reduced turbulence. Sourced through an authorised Georg Fischer distributor, this component integrates with standardized PE100 infrastructure conveying potable water, treated technological effluents, or combustible fuel gases.
The 45-degree branch configuration reduces hydraulic resistance and flow turbulence compared to standard perpendicular tees, making it an ideal choice for pumping stations, gravity drainage bypasses, and high-velocity fluid transport systems where head loss minimization is critical.
Installation and jointing
Equipped with extended long spigot ends, the fitting accommodates standard electrofusion couplers as well as direct clamping in heated tool butt fusion machines according to DVS welding guidelines. The generous spigot length guarantees sufficient clearance for alignment clamps, scraping tools, and welding equipment.
Proper installation requires pipe ends to be scraped to remove the oxidized layer, cleaned with an approved polyethylene cleaner, and clamped without mechanical stress during the fusion and cooling phases to ensure a fully homogenous, leak-tight joint.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
90 mm
|
753251063 |
Material: Polyethylene
PN: 10 Bar
SDR: 17
|
pcs | €326.16 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
|
753251064 |
Material: Polyethylene
PN: 10 Bar
SDR: 17
|
pcs | €463.09 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|