ABS to copper adaptor union PN10
The Georg Fischer ABS to copper adaptor union provides a demountable, rigid transition between metric ABS solvent cement piping circuits and capillary-soldered copper lines. Engineered for industrial chilled water networks, commercial refrigeration circuits, and industrial water treatment installations, this hybrid PN10 fitting combines the high impact strength and corrosion resistance of thermoplastic ABS with the thermal and mechanical stability of copper tubing. BigWeld supplies these industrial transition unions across Europe as an authorised Georg Fischer distributor.
Technical specifications
This adaptor union operates at a continuous working pressure rating of PN10 (10 bar at 20 degrees Celsius) across the full dimensional range. The three-piece demountable architecture allows piping engineers to disconnect mechanical equipment, chillers, and inline valves without dismantling permanently installed pipe runs.
- Nominal pressure: Rated for PN10 (10 bar at 20 degrees Celsius) in pressurized cooling and process lines.
- Dimensional transition: Joins metric ABS solvent cement sockets from d20 mm to d50 mm with copper tubing from 22 mm to 54 mm.
- Demountable interface: Three-part union assembly allows quick disassembly for maintenance, servicing, and component replacement.
- Elastomer sealing: Factory-fitted EPDM O-ring delivers tight hydraulic sealing and absorbs operational vibrations.
- Mechanical integration: Threaded brass nut secures the thermoplastic bush and copper tailpiece under controlled axial compression.
Materials and standards
The component combines an ABS solvent socket bush, a calibrated copper tailpiece, a heavy-duty brass union nut, and an EPDM profile gasket. This multi-material assembly is specifically engineered to eliminate the stress concentrations typically encountered when connecting plastic piping systems to rigid metallic machinery.
Thermoplastic acrylonitrile butadiene styrene (ABS) in RAL 7001 gravel grey provides outstanding notch toughness and ductility, maintaining mechanical integrity at sub-ambient temperatures down to low cooling thresholds where alternative industrial plastics risk brittle failure. The high-purity copper tailpiece enables capillary soldering directly to metallic piping manifolds, heat exchanger coils, and evaporator headers. The threaded brass union nut ensures robust mechanical clamping, while the chemical-resistant EPDM gasket provides reliable long-term sealing against treated cooling water, glycol solutions, and neutral process media.
Installation and jointing
Proper jointing requires sequential assembly to protect thermoplastic components and elastomer seals from heat degradation during copper soldering. Installers must complete the copper capillary soldering operation and allow the tailpiece to cool thoroughly before introducing the EPDM O-ring and assembling the ABS socket.
The ABS solvent cement socket connects to metric ABS pipe lines using Tangit ABS adhesive and dedicated primer, adhering to manufacturer socket cementing protocols to achieve homogeneous chemical welds. After the copper connection is cooled and the solvent cement joint is fully cured, position the EPDM gasket into its seating groove and thread the brass nut onto the ABS union component. Tighten the brass union nut manually until hand-tight, then apply a partial turn with a suitable wrench to compress the EPDM gasket evenly without overstressing the thermoplastic threads.
The Georg Fischer ABS to copper adaptor union provides a demountable, rigid transition between metric ABS solvent cement piping circuits and capillary-soldered copper lines. Engineered for industrial chilled water networks, commercial refrigeration circuits, and industrial water treatment installations, this hybrid PN10 fitting combines the high impact strength and corrosion resistance of thermoplastic ABS with the thermal and mechanical stability of copper tubing. BigWeld supplies these industrial transition unions across Europe as an authorised Georg Fischer distributor.
Technical specifications
This adaptor union operates at a continuous working pressure rating of PN10 (10 bar at 20 degrees Celsius) across the full dimensional range. The three-piece demountable architecture allows piping engineers to disconnect mechanical equipment, chillers, and inline valves without dismantling permanently installed pipe runs.
- Nominal pressure: Rated for PN10 (10 bar at 20 degrees Celsius) in pressurized cooling and process lines.
- Dimensional transition: Joins metric ABS solvent cement sockets from d20 mm to d50 mm with copper tubing from 22 mm to 54 mm.
- Demountable interface: Three-part union assembly allows quick disassembly for maintenance, servicing, and component replacement.
- Elastomer sealing: Factory-fitted EPDM O-ring delivers tight hydraulic sealing and absorbs operational vibrations.
- Mechanical integration: Threaded brass nut secures the thermoplastic bush and copper tailpiece under controlled axial compression.
Materials and standards
The component combines an ABS solvent socket bush, a calibrated copper tailpiece, a heavy-duty brass union nut, and an EPDM profile gasket. This multi-material assembly is specifically engineered to eliminate the stress concentrations typically encountered when connecting plastic piping systems to rigid metallic machinery.
Thermoplastic acrylonitrile butadiene styrene (ABS) in RAL 7001 gravel grey provides outstanding notch toughness and ductility, maintaining mechanical integrity at sub-ambient temperatures down to low cooling thresholds where alternative industrial plastics risk brittle failure. The high-purity copper tailpiece enables capillary soldering directly to metallic piping manifolds, heat exchanger coils, and evaporator headers. The threaded brass union nut ensures robust mechanical clamping, while the chemical-resistant EPDM gasket provides reliable long-term sealing against treated cooling water, glycol solutions, and neutral process media.
Installation and jointing
Proper jointing requires sequential assembly to protect thermoplastic components and elastomer seals from heat degradation during copper soldering. Installers must complete the copper capillary soldering operation and allow the tailpiece to cool thoroughly before introducing the EPDM O-ring and assembling the ABS socket.
The ABS solvent cement socket connects to metric ABS pipe lines using Tangit ABS adhesive and dedicated primer, adhering to manufacturer socket cementing protocols to achieve homogeneous chemical welds. After the copper connection is cooled and the solvent cement joint is fully cured, position the EPDM gasket into its seating groove and thread the brass nut onto the ABS union component. Tighten the brass union nut manually until hand-tight, then apply a partial turn with a suitable wrench to compress the EPDM gasket evenly without overstressing the thermoplastic threads.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
D
22 mm
|
720510106 |
Material: ABS / Copper
PN: 10 Bar
|
pcs | €53.26 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
D
28 mm
|
720510107 |
Material: ABS / Copper
PN: 10 Bar
|
pcs | €76.45 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
D
35 mm
|
720510108 |
Material: ABS / Copper
PN: 10 Bar
|
pcs | €101.79 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
D
42 mm
|
720510109 |
Material: ABS / Copper
PN: 10 Bar
|
pcs | €152.47 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
D
54 mm
|
720510110 |
Material: ABS / Copper
PN: 10 Bar
|
pcs | €194.76 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|