Black electrofusion elbow 45 degrees PE100 SDR11 fitting with terminal pins and clamping screws

Electrofusion Elbow 45 Degrees PE100 SDR11 PN16 d32-d250 mm

Material: Polyethylene PN: 16 Bar SDR: 11

  Datasheet (PDF) |   Product Range | Instructional Video

The Georg Fischer ELGEF Plus 45-degree electrofusion elbow is an engineered PE100 SDR11 pressure fitting manufactured for high-integrity directional changes in critical utility and industrial piping systems. Rated for nominal operating pressures up to 16 bar for water or 10 bar for natural gas distribution, this fitting spans nominal outer diameters from d32 mm up to d250 mm. As an authorised Georg Fischer distributor, BigWeld delivers these premium components for municipal networks and industrial infrastructure.

Technical specifications

Designed specifically for electrofusion assembly, the ELGEF Plus 45-degree elbow delivers precise flow geometry while maintaining full pressure containment across liquid and gaseous fluid networks. Integrated design elements optimize the electrofusion cycle across every diameter in the range.

Key technical and operational specifications include:

  • Nominal pressure rating: PN16 (16 bar water) / 10 bar natural gas across all diameters
  • Dimensional standard ratio: SDR11, matching standard PE100 piping systems
  • Size coverage: Available from d32 mm up to d250 mm external pipe diameter
  • Electrical terminals: Standardized 4 mm contact pins with integrated dynamic fusion indicators
  • Pipe stabilization: Integrated pipe fixation mechanism on sizes d32 mm to d63 mm
  • Fusion zone architecture: Two separate fusion zones on large diameters from d200 mm to d250 mm

Materials and standards

Manufactured from fully compounded 100% virgin PE100 resin in RAL 9005 black, this elbow delivers an estimated utility operational lifespan of up to 100 years. The compound offers outstanding resistance to environmental stress cracking, electrochemical corrosion, and aggressive industrial media.

The fitting is produced and tested in full compliance with EN 12201-3 for water conveyance, EN 1555-3 for combustible gas distribution, and EN ISO 15494 for industrial fluid applications. Quality certifications include approvals from DVGW, SVGW, KIWA, and ACS for potable water hygiene and gas safety, manufactured under certified ISO 9001, ISO 14001, and OHSAS 18001 management frameworks.

Installation and jointing

Electrofusion jointing requires thorough mechanical scraping of pipe ends to remove oxide layers prior to insertion and alignment. Heating wire coils remain protected within the polyethylene body to ensure uniform thermal transfer without wire displacement during the weld cycle.

Sizes up to d63 mm utilize built-in fixation mechanisms that eliminate the need for external clamps during welding, while visual fusion indicators pop up to confirm standard-compliant energy input in accordance with DVS 2207 welding guidelines. The fitting must remain completely undisturbed under tension-free conditions throughout the specified heating and cooling periods to guarantee permanent, homogeneous joint integrity.

  Datasheet (PDF) |   Product Range | Instructional Video

The Georg Fischer ELGEF Plus 45-degree electrofusion elbow is an engineered PE100 SDR11 pressure fitting manufactured for high-integrity directional changes in critical utility and industrial piping systems. Rated for nominal operating pressures up to 16 bar for water or 10 bar for natural gas distribution, this fitting spans nominal outer diameters from d32 mm up to d250 mm. As an authorised Georg Fischer distributor, BigWeld delivers these premium components for municipal networks and industrial infrastructure.

Technical specifications

Designed specifically for electrofusion assembly, the ELGEF Plus 45-degree elbow delivers precise flow geometry while maintaining full pressure containment across liquid and gaseous fluid networks. Integrated design elements optimize the electrofusion cycle across every diameter in the range.

Key technical and operational specifications include:

  • Nominal pressure rating: PN16 (16 bar water) / 10 bar natural gas across all diameters
  • Dimensional standard ratio: SDR11, matching standard PE100 piping systems
  • Size coverage: Available from d32 mm up to d250 mm external pipe diameter
  • Electrical terminals: Standardized 4 mm contact pins with integrated dynamic fusion indicators
  • Pipe stabilization: Integrated pipe fixation mechanism on sizes d32 mm to d63 mm
  • Fusion zone architecture: Two separate fusion zones on large diameters from d200 mm to d250 mm

Materials and standards

Manufactured from fully compounded 100% virgin PE100 resin in RAL 9005 black, this elbow delivers an estimated utility operational lifespan of up to 100 years. The compound offers outstanding resistance to environmental stress cracking, electrochemical corrosion, and aggressive industrial media.

The fitting is produced and tested in full compliance with EN 12201-3 for water conveyance, EN 1555-3 for combustible gas distribution, and EN ISO 15494 for industrial fluid applications. Quality certifications include approvals from DVGW, SVGW, KIWA, and ACS for potable water hygiene and gas safety, manufactured under certified ISO 9001, ISO 14001, and OHSAS 18001 management frameworks.

Installation and jointing

Electrofusion jointing requires thorough mechanical scraping of pipe ends to remove oxide layers prior to insertion and alignment. Heating wire coils remain protected within the polyethylene body to ensure uniform thermal transfer without wire displacement during the weld cycle.

Sizes up to d63 mm utilize built-in fixation mechanisms that eliminate the need for external clamps during welding, while visual fusion indicators pop up to confirm standard-compliant energy input in accordance with DVS 2207 welding guidelines. The fitting must remain completely undisturbed under tension-free conditions throughout the specified heating and cooling periods to guarantee permanent, homogeneous joint integrity.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 32 mm
753151608
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €12.39
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
753151609
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €14.97
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
753151610
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €18.78
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
753151611
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €21.34
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
753151612
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €31.99
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
753151813
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €33.01
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
753151814
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €41.04
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 125 mm
753151815
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €75.65
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 140 mm
753151816
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €108.42
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 160 mm
753151817
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €139.22
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 180 mm
753151818
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €189.12
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 200 mm
753151819
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €435.60
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 225 mm
753151820
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €537.37
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 250 mm
753151821
Material: Polyethylene
PN: 16 Bar
SDR: 11
pcs €698.16
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 753151608
D: 32 mm
Ships in 24 hours
€12.39 / pcs
SKU: 753151609
D: 40 mm
Ships in 24 hours
€14.97 / pcs
SKU: 753151610
D: 50 mm
Ships in 24 hours
€18.78 / pcs
SKU: 753151611
D: 63 mm
Ships in 24 hours
€21.34 / pcs
SKU: 753151612
D: 75 mm
Ships in 24 hours
€31.99 / pcs
SKU: 753151813
D: 90 mm
Ships in 24 hours
€33.01 / pcs
SKU: 753151814
D: 110 mm
Ships in 24 hours
€41.04 / pcs
SKU: 753151815
D: 125 mm
Ships in 24 hours
€75.65 / pcs
SKU: 753151816
D: 140 mm
Ships in 10-15 days
€108.42 / pcs
SKU: 753151817
D: 160 mm
Ships in 24 hours
€139.22 / pcs
SKU: 753151818
D: 180 mm
Ships in 24 hours
€189.12 / pcs
SKU: 753151819
D: 200 mm
Ships in 24 hours
€435.60 / pcs
SKU: 753151820
D: 225 mm
Ships in 24 hours
€537.37 / pcs
SKU: 753151821
D: 250 mm
Ships in 24 hours
€698.16 / pcs