Blue 200mm double flanged pipe fitting.

Ductile Iron Double Flanged Pipe L=200mm PN16 DN50-DN300

  Data Sheet |   Product Range

The double flanged ductile iron pipe with a nominal length of 200 mm is a short spool piece used to make rigid, high-integrity connections in potable water supply, raw water transmission and industrial utility piping. Manufactured to EN 545, it acts as a dimensional spacer and structural link between valves, flow meters, pumps and adjoining flanged pipeline sections, and is supplied from DN50 to DN300. Both integral flanges are drilled to EN 1092-2 PN16, so bolt circles align with standard PN16 municipal and industrial waterworks components.

The body is cast in EN-GJS-500-7 ductile iron (spheroidal graphite iron), which delivers higher tensile strength, a better yield limit and far greater impact tolerance than grey cast iron. That metallurgy keeps the spool reliable at continuous working pressures up to 16 bar and lets it absorb hydraulic surge, water hammer and mechanical loads inside underground distribution chambers or above-ground pumping stations. Admissible fluid temperature runs from 0 to +80 degrees C for drinking water and neutral liquids.

Corrosion protection is a factory-applied electrostatic powder epoxy coating with a minimum thickness of 250 µm, finished in sky blue RAL 5015. The coating meets WRAS and ACS sanitary requirements for contact with drinking water, prevents internal encrustation and scaling, and shields the ductile iron substrate against external soil corrosion and damp chamber environments. Blucast products carry CE marking and a 7-year quality warranty.

  • Product type: double flanged ductile iron pipe (spool piece)
  • Nominal length: L = 200 mm
  • Dimension range: DN50 to DN300
  • Nominal pressure: PN16 / 16 bar
  • Body material: ductile iron EN-GJS-500-7
  • Manufacturing standard: EN 545
  • Flange drilling: EN 1092-2 (PN16)
  • Coating: electrostatic powder epoxy, min. 250 µm, RAL 5015

As an authorised Blucast dealer, BigWeld supplies ductile iron flanged pipes and fittings across Europe for utility and water distribution infrastructure.

  Data Sheet |   Product Range

The double flanged ductile iron pipe with a nominal length of 200 mm is a short spool piece used to make rigid, high-integrity connections in potable water supply, raw water transmission and industrial utility piping. Manufactured to EN 545, it acts as a dimensional spacer and structural link between valves, flow meters, pumps and adjoining flanged pipeline sections, and is supplied from DN50 to DN300. Both integral flanges are drilled to EN 1092-2 PN16, so bolt circles align with standard PN16 municipal and industrial waterworks components.

The body is cast in EN-GJS-500-7 ductile iron (spheroidal graphite iron), which delivers higher tensile strength, a better yield limit and far greater impact tolerance than grey cast iron. That metallurgy keeps the spool reliable at continuous working pressures up to 16 bar and lets it absorb hydraulic surge, water hammer and mechanical loads inside underground distribution chambers or above-ground pumping stations. Admissible fluid temperature runs from 0 to +80 degrees C for drinking water and neutral liquids.

Corrosion protection is a factory-applied electrostatic powder epoxy coating with a minimum thickness of 250 µm, finished in sky blue RAL 5015. The coating meets WRAS and ACS sanitary requirements for contact with drinking water, prevents internal encrustation and scaling, and shields the ductile iron substrate against external soil corrosion and damp chamber environments. Blucast products carry CE marking and a 7-year quality warranty.

  • Product type: double flanged ductile iron pipe (spool piece)
  • Nominal length: L = 200 mm
  • Dimension range: DN50 to DN300
  • Nominal pressure: PN16 / 16 bar
  • Body material: ductile iron EN-GJS-500-7
  • Manufacturing standard: EN 545
  • Flange drilling: EN 1092-2 (PN16)
  • Coating: electrostatic powder epoxy, min. 250 µm, RAL 5015

As an authorised Blucast dealer, BigWeld supplies ductile iron flanged pipes and fittings across Europe for utility and water distribution infrastructure.

Variants, prices and availability
Size SKU U.M.
Price
incl. 21% VAT
Availability Add To Cart
DN 50 mm
FF050200 Pcs €40.58
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 65 mm
FF065200 Pcs €52.37
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 80 mm
FF080200 Pcs €52.13
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 100 mm
FF100200 Pcs €57.70
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 150 mm
FF150200 Pcs €85.83
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 200 mm
FF200200 Pcs €117.62
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 250 mm
FF250200 Pcs €205.93
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
DN 300 mm
FF300200 Pcs €217.80
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: FF050200
DN: 50 mm
Ships in 24 hours
€40.58 / Pcs
SKU: FF065200
DN: 65 mm
Ships in 24 hours
€52.37 / Pcs
SKU: FF080200
DN: 80 mm
Ships in 24 hours
€52.13 / Pcs
SKU: FF100200
DN: 100 mm
Ships in 24 hours
€57.70 / Pcs
SKU: FF150200
DN: 150 mm
Ships in 24 hours
€85.83 / Pcs
SKU: FF200200
DN: 200 mm
Ships in 24 hours
€117.62 / Pcs
SKU: FF250200
DN: 250 mm
Ships in 24 hours
€205.93 / Pcs
SKU: FF300200
DN: 300 mm
Ships in 24 hours
€217.80 / Pcs