ABS Lug Butterfly Valve 578 Bare Shaft DN50-DN300 PN10

ABS Lug Butterfly Valve 578 Bare Shaft DN50-DN300 PN10

PN: 10 Bar Gasket: EPDM

  Datasheet (PDF)

The Georg Fischer Type 578 Lug butterfly valve with bare shaft is an industrial quarter-turn solution engineered for isolation and throttling duties in thermoplastic piping networks. Designed specifically for cooling circuits, chilled water loops, and industrial water treatment installations, this valve combines robust polymer corrosion resistance with a standardized actuator interface. With its PN10 pressure rating and bare shaft design, it enables direct integration into automated process systems across nominal diameters from DN50 up to DN300.

Technical specifications

The bare shaft configuration features a standardized mounting interface for direct automation with quarter-turn actuators. It enables immediate mechanical coupling to pneumatic actuators, electric actuators, or manual gearboxes without needing additional mounting kits.

  • Nominal diameter range: DN50 to DN300 (pipe outer diameter d63 to d315 mm)
  • Nominal pressure rating: PN10 (10 bar at 20 degrees Celsius)
  • Actuator interface: Standardized top flange conforming to DIN/ISO 5211 (pattern F07)
  • Operating torque: Low actuation torque with bi-directional drop-tight shut-off
  • Primary seal: Profiled EPDM elastomer sealing sleeve

Materials and standards

Constructed from high-grade industrial polymers and corrosion-proof metallic inserts, the valve withstands demanding aggressive media. The disc is manufactured from impact-resistant ABS, while the structural body utilizes 30% glass-fibre reinforced polypropylene.

The ABS disc delivers smooth internal hydraulic passages that eliminate scaling and offer chemical resistance against salts and glycol solutions in chilled water circuits. Stainless steel SS316 threaded inserts embedded in the PP-GF30 body provide high mechanical strength. Face-to-face dimensions conform strictly to EN 558 and ISO 5752 series 20, with flange bolt patterns matching EN 1092 PN10, DIN 2501, and ISO 7005 standards.

Installation and jointing

The full-lug body design facilitates direct bolting between backing flanges or installation as an end-of-line isolation valve. Threaded lug bushings enable safe mechanical servicing of downstream piping equipment under operating pressure.

Unlike conventional wafer valves, the threaded inserts allow downstream piping sections to be disassembled while upstream pipework remains pressurized up to the full PN10 rating. The integrated EPDM sleeve functions as both the internal flow seal and the flange face gasket, removing the requirement for additional flat gaskets during assembly between thermoplastic backing flanges.

  Datasheet (PDF)

The Georg Fischer Type 578 Lug butterfly valve with bare shaft is an industrial quarter-turn solution engineered for isolation and throttling duties in thermoplastic piping networks. Designed specifically for cooling circuits, chilled water loops, and industrial water treatment installations, this valve combines robust polymer corrosion resistance with a standardized actuator interface. With its PN10 pressure rating and bare shaft design, it enables direct integration into automated process systems across nominal diameters from DN50 up to DN300.

Technical specifications

The bare shaft configuration features a standardized mounting interface for direct automation with quarter-turn actuators. It enables immediate mechanical coupling to pneumatic actuators, electric actuators, or manual gearboxes without needing additional mounting kits.

  • Nominal diameter range: DN50 to DN300 (pipe outer diameter d63 to d315 mm)
  • Nominal pressure rating: PN10 (10 bar at 20 degrees Celsius)
  • Actuator interface: Standardized top flange conforming to DIN/ISO 5211 (pattern F07)
  • Operating torque: Low actuation torque with bi-directional drop-tight shut-off
  • Primary seal: Profiled EPDM elastomer sealing sleeve

Materials and standards

Constructed from high-grade industrial polymers and corrosion-proof metallic inserts, the valve withstands demanding aggressive media. The disc is manufactured from impact-resistant ABS, while the structural body utilizes 30% glass-fibre reinforced polypropylene.

The ABS disc delivers smooth internal hydraulic passages that eliminate scaling and offer chemical resistance against salts and glycol solutions in chilled water circuits. Stainless steel SS316 threaded inserts embedded in the PP-GF30 body provide high mechanical strength. Face-to-face dimensions conform strictly to EN 558 and ISO 5752 series 20, with flange bolt patterns matching EN 1092 PN10, DIN 2501, and ISO 7005 standards.

Installation and jointing

The full-lug body design facilitates direct bolting between backing flanges or installation as an end-of-line isolation valve. Threaded lug bushings enable safe mechanical servicing of downstream piping equipment under operating pressure.

Unlike conventional wafer valves, the threaded inserts allow downstream piping sections to be disassembled while upstream pipework remains pressurized up to the full PN10 rating. The integrated EPDM sleeve functions as both the internal flow seal and the flange face gasket, removing the requirement for additional flat gaskets during assembly between thermoplastic backing flanges.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 63 mm
169578802
PN: 10 Bar
Gasket: EPDM
pcs €728.46
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
169578803
PN: 10 Bar
Gasket: EPDM
pcs €800.94
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
169578804
PN: 10 Bar
Gasket: EPDM
pcs €873.39
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
169578805
PN: 10 Bar
Gasket: EPDM
pcs €926.84
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 140 mm
169578806
PN: 10 Bar
Gasket: EPDM
pcs €1,262.44
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 160 mm
169578807
PN: 10 Bar
Gasket: EPDM
pcs €1,479.81
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 225 mm
169578808
PN: 10 Bar
Gasket: EPDM
pcs €2,086.29
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 280 mm
169578809
PN: 10 Bar
Gasket: EPDM
pcs €5,554.11
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 315 mm
169578810
PN: 10 Bar
Gasket: EPDM
pcs €8,346.89
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 169578802
D: 63 mm
Ships in 24 hours
€728.46 / pcs
SKU: 169578803
D: 75 mm
Ships in 24 hours
€800.94 / pcs
SKU: 169578804
D: 90 mm
Ships in 24 hours
€873.39 / pcs
SKU: 169578805
D: 110 mm
Ships in 24 hours
€926.84 / pcs
SKU: 169578806
D: 140 mm
Ships in 24 hours
€1,262.44 / pcs
SKU: 169578807
D: 160 mm
Ships in 24 hours
€1,479.81 / pcs
SKU: 169578808
D: 225 mm
Ships in 24 hours
€2,086.29 / pcs
SKU: 169578809
D: 280 mm
Ships in 24 hours
€5,554.11 / pcs
SKU: 169578810
D: 315 mm
Ships in 24 hours
€8,346.89 / pcs