Compressed air threaded saddle
Manufactured by GIRPI (Aliaxis), the GIRAIR threaded saddle provides a rigid, reliable branch take-off connection for industrial compressed air distribution networks. Designed for pipe diameters from 25 mm to 63 mm, the mechanical tapping saddle integrates a cylindrical BSP female threaded outlet in 1/2 inch or 3/4 inch sizes. Built from a specialized ductile vinyl-based alloy, the saddle secures directly onto the main line using M8 fasteners, enabling secondary drops without cutting the main pipe run.
Technical specifications
The GIRAIR threaded saddle is rated for a nominal operating pressure of PN 12.5 bar at 20 degrees Celsius, maintaining certified performance across a continuous operating temperature envelope from -10 degrees Celsius to 40 degrees Celsius. Its robust mechanical clamp architecture delivers pressure-tight branch connections while preserving pipe integrity under cyclic pneumatic loads.
- Nominal working pressure: PN 12.5 bar at 20 degrees Celsius (10 bar maximum working pressure up to 40 degrees Celsius).
- Fire reaction rating: Euroclass B-s1, d0 in accordance with EN 13501-1 standard.
- Branch connection: Cylindrical BSP female thread (1/2 inch or 3/4 inch) conforming to NF T54-038 fitting requirements.
- Clamping hardware: Metric M8 bolts (M8 x 45 mm or M8 x 55 mm depending on nominal dimension).
- Material formulation: Ductile vinyl-based alloy with high impact resistance and integral identification color (RAL 5012 blue).
Applications
The component is developed specifically for compressed air distribution mains, centralised vacuum networks, and non-combustible neutral gas systems in industrial environments. It facilitates rapid installation of branch drops, pressure gauge connections, and downstream equipment feeds from upper pipe quadrants to prevent condensate migration.
Strict operating boundaries apply across the network. The system is not compatible with medical air distribution, flammable gases, or silicone-free installation requirements. Media containing compressor oils formulated with esters, ethoxyls, or amines must not be conveyed, as they cause chemical incompatibility with the ductile vinyl alloy.
Installation and jointing
Mounting involves mechanical clamping around the perimeter of the prepared pipe using the supplied M8 bolts, torqued evenly to create an airtight seal without inducing point deformation. Machining or cutting internal pipe threads directly is strictly prohibited.
When sealing the parallel female plastic thread, installers must use high-density PTFE tape or soft silicone paste approved for thermoplastic compatibility. The application of anaerobic thread-locking resins, tallow, or hemp is strictly forbidden, as these substances cause chemical cracking and mechanical over-stressing of the plastic components.
Manufactured by GIRPI (Aliaxis), the GIRAIR threaded saddle provides a rigid, reliable branch take-off connection for industrial compressed air distribution networks. Designed for pipe diameters from 25 mm to 63 mm, the mechanical tapping saddle integrates a cylindrical BSP female threaded outlet in 1/2 inch or 3/4 inch sizes. Built from a specialized ductile vinyl-based alloy, the saddle secures directly onto the main line using M8 fasteners, enabling secondary drops without cutting the main pipe run.
Technical specifications
The GIRAIR threaded saddle is rated for a nominal operating pressure of PN 12.5 bar at 20 degrees Celsius, maintaining certified performance across a continuous operating temperature envelope from -10 degrees Celsius to 40 degrees Celsius. Its robust mechanical clamp architecture delivers pressure-tight branch connections while preserving pipe integrity under cyclic pneumatic loads.
- Nominal working pressure: PN 12.5 bar at 20 degrees Celsius (10 bar maximum working pressure up to 40 degrees Celsius).
- Fire reaction rating: Euroclass B-s1, d0 in accordance with EN 13501-1 standard.
- Branch connection: Cylindrical BSP female thread (1/2 inch or 3/4 inch) conforming to NF T54-038 fitting requirements.
- Clamping hardware: Metric M8 bolts (M8 x 45 mm or M8 x 55 mm depending on nominal dimension).
- Material formulation: Ductile vinyl-based alloy with high impact resistance and integral identification color (RAL 5012 blue).
Applications
The component is developed specifically for compressed air distribution mains, centralised vacuum networks, and non-combustible neutral gas systems in industrial environments. It facilitates rapid installation of branch drops, pressure gauge connections, and downstream equipment feeds from upper pipe quadrants to prevent condensate migration.
Strict operating boundaries apply across the network. The system is not compatible with medical air distribution, flammable gases, or silicone-free installation requirements. Media containing compressor oils formulated with esters, ethoxyls, or amines must not be conveyed, as they cause chemical incompatibility with the ductile vinyl alloy.
Installation and jointing
Mounting involves mechanical clamping around the perimeter of the prepared pipe using the supplied M8 bolts, torqued evenly to create an airtight seal without inducing point deformation. Machining or cutting internal pipe threads directly is strictly prohibited.
When sealing the parallel female plastic thread, installers must use high-density PTFE tape or soft silicone paste approved for thermoplastic compatibility. The application of anaerobic thread-locking resins, tallow, or hemp is strictly forbidden, as these substances cause chemical cracking and mechanical over-stressing of the plastic components.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
40 mm
Thread
1/2"
|
QSB4012 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
Thread
1/2"
|
QSB5012 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
1/2"
|
QSB6312 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
Thread
3/4"
|
QSB2534 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
Thread
3/4"
|
QSB3234 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
Thread
3/4"
|
QSB4034 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
Thread
3/4"
|
QSB5034 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
Thread
3/4"
|
QSB6334 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|