GIRAIR pipe

GIRAIR pipe

PN: 12.5 Bar

  Datasheet (PDF)

The GIRPI GIRAIR pipe is a specialised thermoplastic pressure piping solution engineered for industrial compressed air, non-combustible neutral gas, and vacuum distribution networks. Manufactured from an impact-modified ductile vinyl alloy in signal blue (RAL 5012), this pipe system provides a continuous operating rating of PN 12.5 up to 25 degrees Celsius. It offers an airtight, corrosion-proof alternative to traditional metal pipework, eliminating condensate rust, scaling, and internal pressure drops across building services and manufacturing plants.

Technical specifications

The GIRAIR pipe maintains structural integrity across an operating temperature range of -10 degrees Celsius to 40 degrees Celsius, handling maximum continuous pressures of 12.5 bar up to 25 degrees Celsius and 10 bar up to 40 degrees Celsius. Its formulation retains a ductile failure mode even at -10 degrees Celsius, preventing splintering or fragmentation during sudden mechanical impacts.

  • Nominal continuous pressure rating: PN 12.5 with a safety coefficient of 2.5 for 50 years.
  • Maximum working pressure: 12.5 bar (-10 to 25 degrees Celsius) and 10 bar (25 to 40 degrees Celsius).
  • Reaction to fire classification: Euroclass B-s1, d0 in accordance with EN 13501-1.
  • Linear thermal expansion coefficient: 0.095 mm/m per degree Celsius according to ISO 11359-2.
  • Density: approximately 1300 kg/m³ in accordance with EN ISO 1183-1.
  • Vicat softening temperature: minimum 73 degrees Celsius under 5 daN load according to EN ISO 2507-2.

Materials and standards

Pipes are manufactured and dimensionally tested according to EN 1452 from a ductile vinyl-based alloy with through-body blue coloration (RAL 5012) for clear fluid network identification. The material delivers robust resistance against atmospheric moisture, aggressive condensation, and common mineral or synthetic compressor lubricant oils.

The pipe meets Euroclass B-s1, d0 fire performance under EN 13501-1, confirming it is non-flammable, emits low smoke, releases no flaming droplets, and restricts heat propagation along the piping run. GIRAIR pipe material is over 98% recyclable. Operating limits prohibit deployment in medical air distribution, flammable gas systems, or silicone-free critical environments, as well as contact with fluids containing esters, ethoxyls, or amines.

Installation and jointing

Jointing is performed via cold solvent welding using specialized GIRPI CLEANER+ primer and 3FIX solvent cement to create fully homogeneous, airtight assemblies. Pipes are supplied factory-chamfered at both ends and delivered in protective plastic sleeves to preserve internal cleanliness until final installation.

Preparation requires square cutting, de-burring, and external chamfering at a 15-degree angle prior to insertion. Pipe clamping must be executed using dedicated Monoklip brackets to permit guided axial thermal expansion and contraction. On-site thermoforming and mechanical threading of GIRAIR pipes are strictly prohibited. Hydrostatic commissioning tests require preliminary low-pressure leak checks followed by testing at 1.5 times the nominal operating pressure after appropriate joint drying times.

  Datasheet (PDF)

The GIRPI GIRAIR pipe is a specialised thermoplastic pressure piping solution engineered for industrial compressed air, non-combustible neutral gas, and vacuum distribution networks. Manufactured from an impact-modified ductile vinyl alloy in signal blue (RAL 5012), this pipe system provides a continuous operating rating of PN 12.5 up to 25 degrees Celsius. It offers an airtight, corrosion-proof alternative to traditional metal pipework, eliminating condensate rust, scaling, and internal pressure drops across building services and manufacturing plants.

Technical specifications

The GIRAIR pipe maintains structural integrity across an operating temperature range of -10 degrees Celsius to 40 degrees Celsius, handling maximum continuous pressures of 12.5 bar up to 25 degrees Celsius and 10 bar up to 40 degrees Celsius. Its formulation retains a ductile failure mode even at -10 degrees Celsius, preventing splintering or fragmentation during sudden mechanical impacts.

  • Nominal continuous pressure rating: PN 12.5 with a safety coefficient of 2.5 for 50 years.
  • Maximum working pressure: 12.5 bar (-10 to 25 degrees Celsius) and 10 bar (25 to 40 degrees Celsius).
  • Reaction to fire classification: Euroclass B-s1, d0 in accordance with EN 13501-1.
  • Linear thermal expansion coefficient: 0.095 mm/m per degree Celsius according to ISO 11359-2.
  • Density: approximately 1300 kg/m³ in accordance with EN ISO 1183-1.
  • Vicat softening temperature: minimum 73 degrees Celsius under 5 daN load according to EN ISO 2507-2.

Materials and standards

Pipes are manufactured and dimensionally tested according to EN 1452 from a ductile vinyl-based alloy with through-body blue coloration (RAL 5012) for clear fluid network identification. The material delivers robust resistance against atmospheric moisture, aggressive condensation, and common mineral or synthetic compressor lubricant oils.

The pipe meets Euroclass B-s1, d0 fire performance under EN 13501-1, confirming it is non-flammable, emits low smoke, releases no flaming droplets, and restricts heat propagation along the piping run. GIRAIR pipe material is over 98% recyclable. Operating limits prohibit deployment in medical air distribution, flammable gas systems, or silicone-free critical environments, as well as contact with fluids containing esters, ethoxyls, or amines.

Installation and jointing

Jointing is performed via cold solvent welding using specialized GIRPI CLEANER+ primer and 3FIX solvent cement to create fully homogeneous, airtight assemblies. Pipes are supplied factory-chamfered at both ends and delivered in protective plastic sleeves to preserve internal cleanliness until final installation.

Preparation requires square cutting, de-burring, and external chamfering at a 15-degree angle prior to insertion. Pipe clamping must be executed using dedicated Monoklip brackets to permit guided axial thermal expansion and contraction. On-site thermoforming and mechanical threading of GIRAIR pipes are strictly prohibited. Hydrostatic commissioning tests require preliminary low-pressure leak checks followed by testing at 1.5 times the nominal operating pressure after appropriate joint drying times.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 16 mm
TUBGA16
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 20 mm
TUBGA20
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
TUBGA25
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
TUBGA32
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
TUBGA40
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
TUBGA50
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
TUBGA63
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
TUBGA75
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
TUBGA90
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
TUBGA110
PN: 12.5 Bar
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: TUBGA16
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA20
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA25
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA32
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA40
D: 40 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA50
D: 50 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA63
D: 63 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA75
D: 75 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA90
D: 90 mm
Ships in 24 hours
On Request / pcs
SKU: TUBGA110
D: 110 mm
Ships in 24 hours
On Request / pcs