Equal Tee compressed air

Equal Tee compressed air

Gasket: Soc. x Soc.

  Datasheet (PDF)

The GIRPI GIRAIR equal tee 90 degrees socket by socket enables balanced three-way branching in pressurized distribution piping systems. Engineered for industrial facility engineers and piping specialists, the component provides socket-weld connections across equal nominal outside diameters from d16 mm to d110 mm. Rated for PN 12.5 nominal operating pressure, it delivers high impact resistance and long-term chemical compatibility with standard compressor cooling lubricants.

Materials and standards

The GIRAIR equal tee is manufactured from a specialized ductile vinyl-based copolymer alloy coloured RAL 5012 blue throughout the mass. This engineering formulation resists aggressive condensates, atmospheric weathering, and external mechanical shocks without shattering into hazardous sharp splinters.

Dimensional conformity and physical characteristics are strictly verified against relevant European and French manufacturing norms:

  • Dimensional requirements: manufactured and tested in accordance with NF T54-038
  • Fire reaction rating: classified B-s1, d0 under EN 13501-1 for optimal synthetic reaction to fire
  • Alternating pressure resistance: certified to NF T 54-094 cyclic tests from 20 to 50 bar
  • Physical density: approximately 1300 kg/m³ in accordance with EN ISO 1183-1
  • Thermal properties: linear thermal expansion coefficient of 0.095 mm/m·degree Celsius (ISO 11359-2) and Vicat softening point of at least 73 degrees Celsius (EN ISO 2507-2)

Technical specifications

The fitting operates continuously up to PN 12.5 within an operational temperature envelope of -10 degrees Celsius to +25 degrees Celsius, de-rating to 10 bar at temperatures between 25 degrees Celsius and 40 degrees Celsius. The internal geometry features a smooth bore profile that minimizes localized flow resistance and pressure drop across the 90-degree branch division.

Static pressure tests under EN ISO 1167-1 validate short-term holding at 52 bar for 1 hour and assembled long-term resistance exceeding 40 bar for 1000 hours. The system is designed for compressed air distribution, non-combustible neutral gas networks, and centralized vacuum piping. GIRAIR components are not suitable for medical air networks, flammable gases, or silicone-free production areas, and must not be exposed to oils or additives containing esters, ethoxyls, or amines.

Installation and jointing

Assembly requires cold solvent welding using dedicated GIRPI CLEANER+ and 3FIX solvent cement to form a permanent, molecularly welded, airtight joint. Cutting must be performed squarely, followed by deburring and external chamfering at a 15-degree angle to protect internal socket tolerances during insertion.

Prior to bonding, installers must mark the female socket penetration depth on the pipe spigot and clean mating surfaces using a lint-free cloth. The 3FIX cement is applied evenly in an axial direction before pushing the elements together longitudinally without twisting, holding them securely for 5 to 10 seconds. In cold working environments between +5 degrees Celsius and +10 degrees Celsius, joint contact should be maintained for 20 to 30 seconds. All pipework supporting must utilize compatible MONOKLIP brackets to guide natural thermal expansion, and the application of anaerobic thread sealing pastes is strictly prohibited.

  Datasheet (PDF)

The GIRPI GIRAIR equal tee 90 degrees socket by socket enables balanced three-way branching in pressurized distribution piping systems. Engineered for industrial facility engineers and piping specialists, the component provides socket-weld connections across equal nominal outside diameters from d16 mm to d110 mm. Rated for PN 12.5 nominal operating pressure, it delivers high impact resistance and long-term chemical compatibility with standard compressor cooling lubricants.

Materials and standards

The GIRAIR equal tee is manufactured from a specialized ductile vinyl-based copolymer alloy coloured RAL 5012 blue throughout the mass. This engineering formulation resists aggressive condensates, atmospheric weathering, and external mechanical shocks without shattering into hazardous sharp splinters.

Dimensional conformity and physical characteristics are strictly verified against relevant European and French manufacturing norms:

  • Dimensional requirements: manufactured and tested in accordance with NF T54-038
  • Fire reaction rating: classified B-s1, d0 under EN 13501-1 for optimal synthetic reaction to fire
  • Alternating pressure resistance: certified to NF T 54-094 cyclic tests from 20 to 50 bar
  • Physical density: approximately 1300 kg/m³ in accordance with EN ISO 1183-1
  • Thermal properties: linear thermal expansion coefficient of 0.095 mm/m·degree Celsius (ISO 11359-2) and Vicat softening point of at least 73 degrees Celsius (EN ISO 2507-2)

Technical specifications

The fitting operates continuously up to PN 12.5 within an operational temperature envelope of -10 degrees Celsius to +25 degrees Celsius, de-rating to 10 bar at temperatures between 25 degrees Celsius and 40 degrees Celsius. The internal geometry features a smooth bore profile that minimizes localized flow resistance and pressure drop across the 90-degree branch division.

Static pressure tests under EN ISO 1167-1 validate short-term holding at 52 bar for 1 hour and assembled long-term resistance exceeding 40 bar for 1000 hours. The system is designed for compressed air distribution, non-combustible neutral gas networks, and centralized vacuum piping. GIRAIR components are not suitable for medical air networks, flammable gases, or silicone-free production areas, and must not be exposed to oils or additives containing esters, ethoxyls, or amines.

Installation and jointing

Assembly requires cold solvent welding using dedicated GIRPI CLEANER+ and 3FIX solvent cement to form a permanent, molecularly welded, airtight joint. Cutting must be performed squarely, followed by deburring and external chamfering at a 15-degree angle to protect internal socket tolerances during insertion.

Prior to bonding, installers must mark the female socket penetration depth on the pipe spigot and clean mating surfaces using a lint-free cloth. The 3FIX cement is applied evenly in an axial direction before pushing the elements together longitudinally without twisting, holding them securely for 5 to 10 seconds. In cold working environments between +5 degrees Celsius and +10 degrees Celsius, joint contact should be maintained for 20 to 30 seconds. All pipework supporting must utilize compatible MONOKLIP brackets to guide natural thermal expansion, and the application of anaerobic thread sealing pastes is strictly prohibited.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 16 mm
GATE16
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 20 mm
GATE20
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
GATE25
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
GATE32
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
GATE40
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
GATE50
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
GATE63
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
GATE75
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
GATE90
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
GATE110
Gasket: Soc. x Soc.
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: GATE16
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: GATE20
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GATE25
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATE32
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GATE40
D: 40 mm
Ships in 24 hours
On Request / pcs
SKU: GATE50
D: 50 mm
Ships in 24 hours
On Request / pcs
SKU: GATE63
D: 63 mm
Ships in 24 hours
On Request / pcs
SKU: GATE75
D: 75 mm
Ships in 24 hours
On Request / pcs
SKU: GATE90
D: 90 mm
Ships in 24 hours
On Request / pcs
SKU: GATE110
D: 110 mm
Ships in 24 hours
On Request / pcs