Compressed air reducing bush short pattern
The GIRPI GIRAIR reducing bush short pattern enables diameter transitions in industrial compressed air networks using male spigot to female socket solvent cement connections. Engineered for high mechanical reliability, this component operates within the GIRAIR piping system up to a continuous pressure of 12.5 bar at 20 degrees Celsius. It provides full pneumatic integrity in closed and ring distribution circuits, resisting internal condensation and standard compressor lubricants across challenging plant environments.
Technical specifications
The GIRAIR short pattern reducing bush provides stepped diameter reductions inside socket fittings, maintaining a compact assembly footprint without obstructing flow. It is rated for nominal continuous operating pressures up to 12.5 bar at fluid temperatures between -10 degrees Celsius and 25 degrees Celsius, and 10 bar up to 40 degrees Celsius.
- Nominal pressure rating: PN 12.5 (tested up to 52.5 bar static factory test pressure)
- Working temperature range: -10 degrees Celsius to +40 degrees Celsius
- End configurations: male spigot by female socket (Spig. x Soc.)
- Fire reaction rating: Euroclass B-s1, d0 per EN 13501-1
- Mechanical cycling resistance: dynamic fatigue tested between 20 bar and 50 bar per NF T 54-094
Materials and standards
Manufactured from a modified ductile vinyl-based alloy, the fitting prevents brittle fragmentation under impact and maintains structural ductility down to -10 degrees Celsius. The material is integrally colored blue (RAL 5012) for rapid fluid network identification and meets strict European safety and dimensional standards.
Dimensional characteristics adhere to NF T54-038 for thermoplastic fittings. In compliance with EN 13501-1, the material achieves a B-s1, d0 fire behavior class, ensuring non-flammable operation without dripping flaming particles or spreading heat along the network. The system is over 98% recyclable. Operating limits restrict use: the GIRAIR system is unsuitable for flammable gases, medical breathing air, or silicone-free applications, and must never be exposed to compressor oils containing esters, amines, or ethoxyls.
Installation and jointing
Jointing is accomplished through cold solvent cementing using GIRPI CLEANER+ surface primer and 3FIX polymer cement. Proper assembly requires precise pipe deburring, creating a 15-degree external chamfer, and marking insertion depths prior to full insertion without twisting.
Ambient installation temperatures should range between +5 degrees Celsius and +35 degrees Celsius, holding jointed components firmly for 5 to 10 seconds. Hydrostatic testing is conducted after adequate curing time: an initial leak check at 1 bar cold water pressure, followed by a pressure ramp to 1.5 times nominal operating pressure for a maximum duration of 1 hour. Piping runs require support from dedicated MONOKLIP brackets and wedges to manage thermal expansion calculated with a linear coefficient of 0.095 mm/m per degree Celsius.
The GIRPI GIRAIR reducing bush short pattern enables diameter transitions in industrial compressed air networks using male spigot to female socket solvent cement connections. Engineered for high mechanical reliability, this component operates within the GIRAIR piping system up to a continuous pressure of 12.5 bar at 20 degrees Celsius. It provides full pneumatic integrity in closed and ring distribution circuits, resisting internal condensation and standard compressor lubricants across challenging plant environments.
Technical specifications
The GIRAIR short pattern reducing bush provides stepped diameter reductions inside socket fittings, maintaining a compact assembly footprint without obstructing flow. It is rated for nominal continuous operating pressures up to 12.5 bar at fluid temperatures between -10 degrees Celsius and 25 degrees Celsius, and 10 bar up to 40 degrees Celsius.
- Nominal pressure rating: PN 12.5 (tested up to 52.5 bar static factory test pressure)
- Working temperature range: -10 degrees Celsius to +40 degrees Celsius
- End configurations: male spigot by female socket (Spig. x Soc.)
- Fire reaction rating: Euroclass B-s1, d0 per EN 13501-1
- Mechanical cycling resistance: dynamic fatigue tested between 20 bar and 50 bar per NF T 54-094
Materials and standards
Manufactured from a modified ductile vinyl-based alloy, the fitting prevents brittle fragmentation under impact and maintains structural ductility down to -10 degrees Celsius. The material is integrally colored blue (RAL 5012) for rapid fluid network identification and meets strict European safety and dimensional standards.
Dimensional characteristics adhere to NF T54-038 for thermoplastic fittings. In compliance with EN 13501-1, the material achieves a B-s1, d0 fire behavior class, ensuring non-flammable operation without dripping flaming particles or spreading heat along the network. The system is over 98% recyclable. Operating limits restrict use: the GIRAIR system is unsuitable for flammable gases, medical breathing air, or silicone-free applications, and must never be exposed to compressor oils containing esters, amines, or ethoxyls.
Installation and jointing
Jointing is accomplished through cold solvent cementing using GIRPI CLEANER+ surface primer and 3FIX polymer cement. Proper assembly requires precise pipe deburring, creating a 15-degree external chamfer, and marking insertion depths prior to full insertion without twisting.
Ambient installation temperatures should range between +5 degrees Celsius and +35 degrees Celsius, holding jointed components firmly for 5 to 10 seconds. Hydrostatic testing is conducted after adequate curing time: an initial leak check at 1 bar cold water pressure, followed by a pressure ramp to 1.5 times nominal operating pressure for a maximum duration of 1 hour. Piping runs require support from dedicated MONOKLIP brackets and wedges to manage thermal expansion calculated with a linear coefficient of 0.095 mm/m per degree Celsius.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
D
16 mm
|
GARS20 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
D
20 mm
|
GARS25 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
D
25 mm
|
GARS32 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
D
32 mm
|
GARS40 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
D
40 mm
|
GARS50 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
D
50 mm
|
GARS63 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
D
63 mm
|
GARS75 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
D
75 mm
|
GARS90 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
D
90 mm
|
GARS110 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|