Compressed air threaded Elbow 90° metric - brass Rp

Compressed air threaded Elbow 90° metric - brass Rp

Material: PVC-U / Brass

  Datasheet (PDF)

The GIRPI GIRAIR threaded 90-degree elbow provides a high-integrity directional transition between solvent-welded metric pipework and threaded metal components. Designed specifically for industrial compressed air and non-combustible neutral gas distribution, this fitting features a d20mm solvent socket and a parallel 1/2-inch female brass insert. It delivers a robust, high-torque connection rated for continuous industrial operation up to 12.5 bar at 20 degrees Celsius.

Technical specifications

Engineered for high-pressure pneumatic networks, the elbow withstands cyclic mechanical stresses and thermal fluctuations across industrial environments. The integrated brass female thread allows direct coupling to metal air drops, accessories, and threaded tools without compromising pipeline integrity.

  • Nominal diameter: d20mm socket (DN 15) to 1/2-inch female BSP parallel thread
  • Nominal pressure rating: PN 12.5 bar at 20 degrees Celsius (10 bar at 40 degrees Celsius)
  • Operating temperature range: -10 degrees Celsius to 40 degrees Celsius
  • Maximum tightening torque: 50 N.m on the brass insert
  • Socket insertion depth: 16.5 mm
  • Static pressure resistance: tested to withstand over 40 bar on completed assemblies

Materials and standards

Manufactured from an impact-modified ductile vinyl-based alloy, the fitting prevents brittle fragmentation under severe mechanical shock even at sub-zero temperatures down to -10 degrees Celsius. The metallic transition consists of a factory-inserted CW617 forged brass component that maintains mechanical strength under demanding assembly torque.

The component complies dimensionally with standard NF T54-038 and exhibits exceptional fire behavior classified as B-s1,d0 in accordance with EN 13501-1. The alloy is non-flammable, emits no burning droplets, and resists conventional compressor synthetic and mineral oils. The system is unsuited for medical air networks, flammable gas conveyance, and silicon-free environments.

Installation and jointing

Jointing to d20mm pipe requires cold solvent welding using dedicated primer and welding polymer, whereas the threaded port must be sealed strictly with compatible non-anaerobic compounds. The socket end must be deburred, chamfered at an angle of 15 degrees, cleaned with CLEANER+, and bonded using 3FIX polymer.

When connecting to male threaded metal equipment, use PTFE tape or compatible plastic-safe sealant paste such as Tangit. Anaerobic resins are strictly prohibited, as excess uncured resin contacting the thermoplastic alloy will induce stress cracking. Assembly torque must never exceed 50 N.m.

  Datasheet (PDF)

The GIRPI GIRAIR threaded 90-degree elbow provides a high-integrity directional transition between solvent-welded metric pipework and threaded metal components. Designed specifically for industrial compressed air and non-combustible neutral gas distribution, this fitting features a d20mm solvent socket and a parallel 1/2-inch female brass insert. It delivers a robust, high-torque connection rated for continuous industrial operation up to 12.5 bar at 20 degrees Celsius.

Technical specifications

Engineered for high-pressure pneumatic networks, the elbow withstands cyclic mechanical stresses and thermal fluctuations across industrial environments. The integrated brass female thread allows direct coupling to metal air drops, accessories, and threaded tools without compromising pipeline integrity.

  • Nominal diameter: d20mm socket (DN 15) to 1/2-inch female BSP parallel thread
  • Nominal pressure rating: PN 12.5 bar at 20 degrees Celsius (10 bar at 40 degrees Celsius)
  • Operating temperature range: -10 degrees Celsius to 40 degrees Celsius
  • Maximum tightening torque: 50 N.m on the brass insert
  • Socket insertion depth: 16.5 mm
  • Static pressure resistance: tested to withstand over 40 bar on completed assemblies

Materials and standards

Manufactured from an impact-modified ductile vinyl-based alloy, the fitting prevents brittle fragmentation under severe mechanical shock even at sub-zero temperatures down to -10 degrees Celsius. The metallic transition consists of a factory-inserted CW617 forged brass component that maintains mechanical strength under demanding assembly torque.

The component complies dimensionally with standard NF T54-038 and exhibits exceptional fire behavior classified as B-s1,d0 in accordance with EN 13501-1. The alloy is non-flammable, emits no burning droplets, and resists conventional compressor synthetic and mineral oils. The system is unsuited for medical air networks, flammable gas conveyance, and silicon-free environments.

Installation and jointing

Jointing to d20mm pipe requires cold solvent welding using dedicated primer and welding polymer, whereas the threaded port must be sealed strictly with compatible non-anaerobic compounds. The socket end must be deburred, chamfered at an angle of 15 degrees, cleaned with CLEANER+, and bonded using 3FIX polymer.

When connecting to male threaded metal equipment, use PTFE tape or compatible plastic-safe sealant paste such as Tangit. Anaerobic resins are strictly prohibited, as excess uncured resin contacting the thermoplastic alloy will induce stress cracking. Assembly torque must never exceed 50 N.m.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 20 mm
Thread 1/2"
GA4GL20
Material: PVC-U / Brass
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: GA4GL20
D: 20 mm
Thread: 1/2"
Ships in 24 hours
On Request / pcs