Compressed air 90° Threaded Elbow with Metal Reinforcing Ring Rp
The GIRPI GIRAIR 90-degree threaded elbow with metal reinforcing ring is an engineered transition fitting designed for industrial compressed air distribution networks. Providing a 90-degree directional transition between a solvent-welded metric pipe and a female threaded branch, the component delivers safe jointing to threaded equipment while maintaining circuit integrity up to a maximum continuous operating pressure of 12.5 bar.
Technical specifications
The GIRAIR 90-degree reinforced threaded elbow connects solvent-cemented pipework directly to threaded accessories, maintaining full pressure performance across common operating conditions. The fitting withstands continuous pneumatic working pressures up to 12.5 bar from -10 degrees Celsius to 25 degrees Celsius (14 degrees Fahrenheit to 77 degrees Fahrenheit) and 10 bar up to 40 degrees Celsius (104 degrees Fahrenheit).
- Connection interface: Metric female solvent socket to cylindrical female BSP thread
- Nominal working pressure: PN 12.5 bar at continuous operating temperature
- Operating temperature range: -10 degrees Celsius to +40 degrees Celsius (14 degrees Fahrenheit to 104 degrees Fahrenheit)
- Mechanical reinforcement: Outer metal reinforcing ring encasing the female thread
- Static pressure resistance: Tested to burst safety thresholds exceeding 52 bar
- Joining method: Cold solvent welding on the socket end and mechanical threaded engagement on the outlet
Materials and standards
Manufactured from a specialised ductile vinyl-based alloy, the fitting complies with NF T54-038 dimensional requirements and incorporates a structural metal reinforcing ring to prevent hoop stress deformation. The assembly is specifically rated for continuous service in compressed air, neutral gas, and industrial vacuum circuits.
The polymer alloy achieves an EN 13501-1 Euroclasses fire reaction classification of B-s1,d0, preventing flame propagation and avoiding molten flaming drops under fire exposure. Under violent mechanical impact at temperatures down to -10 degrees Celsius (14 degrees Fahrenheit), the ductile matrix eliminates brittle fragmentation and splinter projection. Coloured throughout the resin in safety blue (RAL 5012) for rapid circuit identification, the system is recyclable above 98 percent. The fitting must not be used with medical air networks, flammable gases, or silicone-free applications, and is incompatible with compressor oils containing esters, ethoxyls, or amines.
Installation and jointing
Assembly requires cold solvent welding on the socket entry and careful, resin-free mechanical engagement on the reinforced threaded port. All connections must follow standard installation protocols to guarantee long-term air tightness without placing undue stress on the polymer body.
Pipe spigots must be cut square, deburred, and chamfered externally at a 15-degree angle before marking insertion depth. Surfaces must be thoroughly degreased with CLEANER+ and joined using 3FIX welding polymer without twisting the socket. The threaded side must be engaged by hand, with final tightening limited to one-quarter turn using a strap wrench. Thread sealing must be achieved using soft silicone paste or high-density PTFE tape; anaerobic sealing resins, hemp, and tallow are strictly prohibited, as they induce severe chemical stress cracking in amorphous polymers.
The GIRPI GIRAIR 90-degree threaded elbow with metal reinforcing ring is an engineered transition fitting designed for industrial compressed air distribution networks. Providing a 90-degree directional transition between a solvent-welded metric pipe and a female threaded branch, the component delivers safe jointing to threaded equipment while maintaining circuit integrity up to a maximum continuous operating pressure of 12.5 bar.
Technical specifications
The GIRAIR 90-degree reinforced threaded elbow connects solvent-cemented pipework directly to threaded accessories, maintaining full pressure performance across common operating conditions. The fitting withstands continuous pneumatic working pressures up to 12.5 bar from -10 degrees Celsius to 25 degrees Celsius (14 degrees Fahrenheit to 77 degrees Fahrenheit) and 10 bar up to 40 degrees Celsius (104 degrees Fahrenheit).
- Connection interface: Metric female solvent socket to cylindrical female BSP thread
- Nominal working pressure: PN 12.5 bar at continuous operating temperature
- Operating temperature range: -10 degrees Celsius to +40 degrees Celsius (14 degrees Fahrenheit to 104 degrees Fahrenheit)
- Mechanical reinforcement: Outer metal reinforcing ring encasing the female thread
- Static pressure resistance: Tested to burst safety thresholds exceeding 52 bar
- Joining method: Cold solvent welding on the socket end and mechanical threaded engagement on the outlet
Materials and standards
Manufactured from a specialised ductile vinyl-based alloy, the fitting complies with NF T54-038 dimensional requirements and incorporates a structural metal reinforcing ring to prevent hoop stress deformation. The assembly is specifically rated for continuous service in compressed air, neutral gas, and industrial vacuum circuits.
The polymer alloy achieves an EN 13501-1 Euroclasses fire reaction classification of B-s1,d0, preventing flame propagation and avoiding molten flaming drops under fire exposure. Under violent mechanical impact at temperatures down to -10 degrees Celsius (14 degrees Fahrenheit), the ductile matrix eliminates brittle fragmentation and splinter projection. Coloured throughout the resin in safety blue (RAL 5012) for rapid circuit identification, the system is recyclable above 98 percent. The fitting must not be used with medical air networks, flammable gases, or silicone-free applications, and is incompatible with compressor oils containing esters, ethoxyls, or amines.
Installation and jointing
Assembly requires cold solvent welding on the socket entry and careful, resin-free mechanical engagement on the reinforced threaded port. All connections must follow standard installation protocols to guarantee long-term air tightness without placing undue stress on the polymer body.
Pipe spigots must be cut square, deburred, and chamfered externally at a 15-degree angle before marking insertion depth. Surfaces must be thoroughly degreased with CLEANER+ and joined using 3FIX welding polymer without twisting the socket. The threaded side must be engaged by hand, with final tightening limited to one-quarter turn using a strap wrench. Thread sealing must be achieved using soft silicone paste or high-density PTFE tape; anaerobic sealing resins, hemp, and tallow are strictly prohibited, as they induce severe chemical stress cracking in amorphous polymers.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
Thread
1/2"
|
GA4G20 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
Thread
1/4"
|
GA4G25 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|