End Cap compressed air

End Cap compressed air

  Datasheet (PDF)

The GIRPI GIRAIR end cap provides reliable, permanent socket-welded line termination for compressed air, inert gas, and industrial vacuum pipework. Engineered for industrial plant rooms and distribution manifolds, this female solvent-cement component safely blanks dead ends across metric line sizes from d16 up to d110. It is rated for PN 12.5 operating pressure up to 25 degrees Celsius, delivering complete airtight integrity and exceptional impact performance across challenging ambient conditions.

Technical specifications

The GIRPI GIRAIR end cap is engineered to terminate pipe sections cleanly while sustaining full distribution pressure without mechanical degradation. The fitting features an internal solvent cement socket calibrated to standard metric pipe dimensions for permanent, airtight containment.

  • Nominal pressure rating: PN 12.5 bar at fluid temperatures between -10 degrees and 25 degrees Celsius
  • Maximum operating limit: 10 bar at working temperatures up to 40 degrees Celsius
  • Fire reaction classification: Euroclasses B-s1, d0 according to EN 13501-1 standard
  • VICAT softening temperature: 73 degrees Celsius or higher pursuant to EN ISO 2507-2
  • Density: approximately 1300 kg/m3 tested to EN ISO 1183-1
  • Linear thermal expansion coefficient: 0.095 mm/m per degree Celsius in accordance with ISO 11359-2

Materials and standards

The fitting is manufactured from a specially formulated ductile vinyl-based alloy that prevents brittle failure under severe impact. Dimensional tolerances comply strictly with French standard NF T54-038 for industrial thermoplastic fittings.

Colored in safety blue (RAL 5012) incorporated directly into the resin matrix, the material allows instant identification of compressed air systems. The ductile polymer retains high shock absorbency even down to -10 degrees Celsius without projecting splinters under extreme mechanical impact. The system is certified non-flammable with no flaming droplet formation. GIRAIR components are not compatible with medical air distribution, flammable gas networks, or silicon-free cleanroom installations, and must not come into contact with compressor lubricants containing esters, amines, or ethoxyls.

Installation and jointing

Cold solvent welding creates a homogeneous, high-strength chemical bond that eliminates leakage risks at pipe terminations. The jointing procedure requires thorough external pipe chamfering at a 15 degrees angle prior to solvent application.

Mating surfaces must be cleaned and conditioned using GIRPI CLEANER+ on a clean lint-free cloth before applying 3FIX solvent cement. The adhesive is brushed uniformly over the entire pipe end and socket depth, after which the cap is pushed straight into position without rotational twisting and held immobile for 5 to 10 seconds. Installation must be conducted at ambient temperatures between 5 degrees and 35 degrees Celsius. Hydraulic pressure testing must be preceded by complete curing according to manufacturer drying schedules.

  Datasheet (PDF)

The GIRPI GIRAIR end cap provides reliable, permanent socket-welded line termination for compressed air, inert gas, and industrial vacuum pipework. Engineered for industrial plant rooms and distribution manifolds, this female solvent-cement component safely blanks dead ends across metric line sizes from d16 up to d110. It is rated for PN 12.5 operating pressure up to 25 degrees Celsius, delivering complete airtight integrity and exceptional impact performance across challenging ambient conditions.

Technical specifications

The GIRPI GIRAIR end cap is engineered to terminate pipe sections cleanly while sustaining full distribution pressure without mechanical degradation. The fitting features an internal solvent cement socket calibrated to standard metric pipe dimensions for permanent, airtight containment.

  • Nominal pressure rating: PN 12.5 bar at fluid temperatures between -10 degrees and 25 degrees Celsius
  • Maximum operating limit: 10 bar at working temperatures up to 40 degrees Celsius
  • Fire reaction classification: Euroclasses B-s1, d0 according to EN 13501-1 standard
  • VICAT softening temperature: 73 degrees Celsius or higher pursuant to EN ISO 2507-2
  • Density: approximately 1300 kg/m3 tested to EN ISO 1183-1
  • Linear thermal expansion coefficient: 0.095 mm/m per degree Celsius in accordance with ISO 11359-2

Materials and standards

The fitting is manufactured from a specially formulated ductile vinyl-based alloy that prevents brittle failure under severe impact. Dimensional tolerances comply strictly with French standard NF T54-038 for industrial thermoplastic fittings.

Colored in safety blue (RAL 5012) incorporated directly into the resin matrix, the material allows instant identification of compressed air systems. The ductile polymer retains high shock absorbency even down to -10 degrees Celsius without projecting splinters under extreme mechanical impact. The system is certified non-flammable with no flaming droplet formation. GIRAIR components are not compatible with medical air distribution, flammable gas networks, or silicon-free cleanroom installations, and must not come into contact with compressor lubricants containing esters, amines, or ethoxyls.

Installation and jointing

Cold solvent welding creates a homogeneous, high-strength chemical bond that eliminates leakage risks at pipe terminations. The jointing procedure requires thorough external pipe chamfering at a 15 degrees angle prior to solvent application.

Mating surfaces must be cleaned and conditioned using GIRPI CLEANER+ on a clean lint-free cloth before applying 3FIX solvent cement. The adhesive is brushed uniformly over the entire pipe end and socket depth, after which the cap is pushed straight into position without rotational twisting and held immobile for 5 to 10 seconds. Installation must be conducted at ambient temperatures between 5 degrees and 35 degrees Celsius. Hydraulic pressure testing must be preceded by complete curing according to manufacturer drying schedules.

Variants, prices and availability
Size SKU U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 16 mm
GABO16 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 20 mm
GABO20 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
GABO25 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
GABO32 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
GABO40 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
GABO50 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
GABO63 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
GABO75 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
GABO110 pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: GABO16
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: GABO20
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GABO25
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GABO32
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GABO40
D: 40 mm
Ships in 24 hours
On Request / pcs
SKU: GABO50
D: 50 mm
Ships in 24 hours
On Request / pcs
SKU: GABO63
D: 63 mm
Ships in 24 hours
On Request / pcs
SKU: GABO75
D: 75 mm
Ships in 24 hours
On Request / pcs
SKU: GABO110
D: 110 mm
Ships in 24 hours
On Request / pcs