PP Reduced Branch 45°
The PP reduced branch 45 degrees is an injection-moulded polypropylene fitting designed for non-pressure soil, waste discharge, and gravity ventilation networks inside residential, commercial, and industrial buildings. Configured with a 45-degree angled lateral reduction, this component integrates smaller secondary drainage lines into larger vertical discharge stacks or horizontal collectors, optimizing hydrodynamic flow while minimizing turbulence and particulate accumulation.
Technical specifications
This reduced junction fitting delivers reliable hydrodynamic transition between different pipe calibres in gravity drainage systems. Engineered to withstand continuous thermal and mechanical demands, it ensures dependable operation in harsh discharge environments.
- Continuous working temperature: up to 60 degrees C (intermittent hot water surges up to 95 degrees C)
- Low-temperature impact resistance: operational handling down to -15 degrees C
- Chemical resistance: broad operating range covering media from pH 2 to pH 12
- Hydraulic surface roughness: Manning coefficient n = 0.01
- Coefficient of linear thermal expansion: 0.12 mm/(m·K)
- Sealing system: factory-fitted elastomeric EPDM lip gasket
Materials and standards
Manufactured from stabilized polypropylene copolymer, the fitting demonstrates high mechanical impact strength, shock resistance, and sustained durability against aggressive chemical media. The unplasticized material formulation is engineered to prevent stress cracking and embrittlement over an anticipated operational service life of at least 50 years.
The component complies with European standard EN 1451-1 for plastic piping systems dedicated to soil and waste discharge within building structures. Impact resistance is validated according to EN 744 by falling mass testing with zero breakages, ensuring resilient performance during cold-weather handling and building micro-movements. The chemically inert polypropylene core resists domestic laundry detergents, commercial sanitizing chemicals, and acidic wastewater.
Installation and jointing
Jointing is performed via precision push-fit sockets equipped with pre-inserted EPDM elastomeric sealing rings, providing immediate watertight integrity without adhesives or mechanical clamping. The push-fit connection safely absorbs axial linear thermal expansion and acoustic building vibrations.
During assembly, spigots must be cut square, deburred, and chamfered at a 15-degree angle before applying dedicated silicone lubricant to the gasket and bevel. The socket-and-gasket configuration naturally compensates for thermal movements based on the material expansion rate of 0.12 mm/(m·K). Solvent cements, chemical welding solvents, and open flames are strictly prohibited on polypropylene systems. Field cutting or shortening of injection-moulded fittings is not permitted.
The PP reduced branch 45 degrees is an injection-moulded polypropylene fitting designed for non-pressure soil, waste discharge, and gravity ventilation networks inside residential, commercial, and industrial buildings. Configured with a 45-degree angled lateral reduction, this component integrates smaller secondary drainage lines into larger vertical discharge stacks or horizontal collectors, optimizing hydrodynamic flow while minimizing turbulence and particulate accumulation.
Technical specifications
This reduced junction fitting delivers reliable hydrodynamic transition between different pipe calibres in gravity drainage systems. Engineered to withstand continuous thermal and mechanical demands, it ensures dependable operation in harsh discharge environments.
- Continuous working temperature: up to 60 degrees C (intermittent hot water surges up to 95 degrees C)
- Low-temperature impact resistance: operational handling down to -15 degrees C
- Chemical resistance: broad operating range covering media from pH 2 to pH 12
- Hydraulic surface roughness: Manning coefficient n = 0.01
- Coefficient of linear thermal expansion: 0.12 mm/(m·K)
- Sealing system: factory-fitted elastomeric EPDM lip gasket
Materials and standards
Manufactured from stabilized polypropylene copolymer, the fitting demonstrates high mechanical impact strength, shock resistance, and sustained durability against aggressive chemical media. The unplasticized material formulation is engineered to prevent stress cracking and embrittlement over an anticipated operational service life of at least 50 years.
The component complies with European standard EN 1451-1 for plastic piping systems dedicated to soil and waste discharge within building structures. Impact resistance is validated according to EN 744 by falling mass testing with zero breakages, ensuring resilient performance during cold-weather handling and building micro-movements. The chemically inert polypropylene core resists domestic laundry detergents, commercial sanitizing chemicals, and acidic wastewater.
Installation and jointing
Jointing is performed via precision push-fit sockets equipped with pre-inserted EPDM elastomeric sealing rings, providing immediate watertight integrity without adhesives or mechanical clamping. The push-fit connection safely absorbs axial linear thermal expansion and acoustic building vibrations.
During assembly, spigots must be cut square, deburred, and chamfered at a 15-degree angle before applying dedicated silicone lubricant to the gasket and bevel. The socket-and-gasket configuration naturally compensates for thermal movements based on the material expansion rate of 0.12 mm/(m·K). Solvent cements, chemical welding solvents, and open flames are strictly prohibited on polypropylene systems. Field cutting or shortening of injection-moulded fittings is not permitted.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
50 mm
D
40 mm
|
FPE0041 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
D
50 mm
|
FPE0064 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
D
40 mm
|
FPE0063 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
D
50 mm
|
FPPTS11005045IGR |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
D
75 mm
|
FPE0074 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
125 mm
D
110 mm
|
FPE0047 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
D
110 mm
|
FPE0112 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
D
125 mm
|
FPE0116 |
Material: PP
Gasket: EPDM
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|