Compressed air Drop bend 180° profile S
The GIRPI GIRAIR drop bend 180 degrees profile S is an engineered ductile vinyl alloy fitting designed for compressed air and neutral gas header take-offs. Featuring spigot-by-spigot ends for cold solvent welding into socket fittings, this profile S swan-neck fitting takes air off the top of the distribution main to eliminate liquid condensate carryover into downstream drops, rated for continuous PN 12.5 service at ambient temperatures up to 25 degrees Celsius.
Applications
The GIRAIR profile S drop bend provides reliable condensate segregation by elevating off-takes vertically above the main distribution line before routing flow downwards to drop legs. This swan-neck geometry prevents accumulated water, compressor oils, and line particulates from entering pneumatic tooling, spray systems, or automated machinery.
It is engineered for industrial distribution environments, but operates within defined operational boundaries:
- Primary service in compressed air distribution, industrial vacuum, and non-combustible neutral gas networks.
- Effective moisture protection for sensitive downstream equipment such as pneumatic tools and paint guns.
- Continuous maximum working pressure of 12.5 bar from -10 degrees Celsius to 25 degrees Celsius, and 10 bar up to 40 degrees Celsius.
- Unsuitable for medical air networks, flammable gases, or silicone-free production installations.
- Incompatible with synthetic compressor lubricants containing esters, ethoxyls, or amines.
Materials and standards
Manufactured from a specially formulated ductile vinyl alloy, the fitting delivers high mechanical impact resistance without the risk of brittle shattering even at sub-zero temperatures down to -10 degrees Celsius. The material is fully coloured in blue RAL 5012 throughout the resin mass to allow rapid and definitive network identification.
Compliance with European manufacturing standards ensures structural safety and fire resistance:
- Manufactured and tested in accordance with French fitting standard NF T54-038.
- Achieves Euroclasses B-s1, d0 fire reaction classification conforming to EN 13501-1, preventing flaming droplets and flame propagation.
- Material density of approximately 1300 kg/m3 according to EN ISO 1183-1 with linear expansion coefficient of 0.095 mm/m degrees Celsius under ISO 11359-2.
- Thermal conductivity rated at 0.17 W/m.K in compliance with ISO 22007-1.
- Fully recyclable formulation exceeding 98% material recoverability at end of service life.
Installation and jointing
Jointing is performed through cold solvent welding using GIRPI CLEANER+ surface primer and 3FIX blue polymer adhesive to ensure permanent airtightness. The spigot ends insert directly into standard GIRAIR female sockets or reducing tees without thermal manipulation or site thermoforming.
Prior to assembly, pipe and spigot spuds must be square-cut, de-burred, and externally chamfered to a 15 degrees angle to prevent cement scraping. Mating surfaces are primed and thinly coated with 3FIX cement, pushed home longitudinally without twisting, and held motionless for 5 to 10 seconds. In low ambient conditions down to 5 degrees Celsius, hold times should be extended to 20 to 30 seconds. Networks must be supported using compatible MONOKLIP brackets to guide natural thermal expansion while protecting the assembly against mechanical stress.
The GIRPI GIRAIR drop bend 180 degrees profile S is an engineered ductile vinyl alloy fitting designed for compressed air and neutral gas header take-offs. Featuring spigot-by-spigot ends for cold solvent welding into socket fittings, this profile S swan-neck fitting takes air off the top of the distribution main to eliminate liquid condensate carryover into downstream drops, rated for continuous PN 12.5 service at ambient temperatures up to 25 degrees Celsius.
Applications
The GIRAIR profile S drop bend provides reliable condensate segregation by elevating off-takes vertically above the main distribution line before routing flow downwards to drop legs. This swan-neck geometry prevents accumulated water, compressor oils, and line particulates from entering pneumatic tooling, spray systems, or automated machinery.
It is engineered for industrial distribution environments, but operates within defined operational boundaries:
- Primary service in compressed air distribution, industrial vacuum, and non-combustible neutral gas networks.
- Effective moisture protection for sensitive downstream equipment such as pneumatic tools and paint guns.
- Continuous maximum working pressure of 12.5 bar from -10 degrees Celsius to 25 degrees Celsius, and 10 bar up to 40 degrees Celsius.
- Unsuitable for medical air networks, flammable gases, or silicone-free production installations.
- Incompatible with synthetic compressor lubricants containing esters, ethoxyls, or amines.
Materials and standards
Manufactured from a specially formulated ductile vinyl alloy, the fitting delivers high mechanical impact resistance without the risk of brittle shattering even at sub-zero temperatures down to -10 degrees Celsius. The material is fully coloured in blue RAL 5012 throughout the resin mass to allow rapid and definitive network identification.
Compliance with European manufacturing standards ensures structural safety and fire resistance:
- Manufactured and tested in accordance with French fitting standard NF T54-038.
- Achieves Euroclasses B-s1, d0 fire reaction classification conforming to EN 13501-1, preventing flaming droplets and flame propagation.
- Material density of approximately 1300 kg/m3 according to EN ISO 1183-1 with linear expansion coefficient of 0.095 mm/m degrees Celsius under ISO 11359-2.
- Thermal conductivity rated at 0.17 W/m.K in compliance with ISO 22007-1.
- Fully recyclable formulation exceeding 98% material recoverability at end of service life.
Installation and jointing
Jointing is performed through cold solvent welding using GIRPI CLEANER+ surface primer and 3FIX blue polymer adhesive to ensure permanent airtightness. The spigot ends insert directly into standard GIRAIR female sockets or reducing tees without thermal manipulation or site thermoforming.
Prior to assembly, pipe and spigot spuds must be square-cut, de-burred, and externally chamfered to a 15 degrees angle to prevent cement scraping. Mating surfaces are primed and thinly coated with 3FIX cement, pushed home longitudinally without twisting, and held motionless for 5 to 10 seconds. In low ambient conditions down to 5 degrees Celsius, hold times should be extended to 20 to 30 seconds. Networks must be supported using compatible MONOKLIP brackets to guide natural thermal expansion while protecting the assembly against mechanical stress.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
|
Q2S20 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
|
Q2S25 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
|
Q2S32 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|