Compressed air 90° Reducing Tee

Compressed air 90° Reducing Tee

Material: PVC

  Datasheet (PDF)

The GIRAIR 90 degrees reducing tee, manufactured by GIRPI (Aliaxis), is an engineered thermoplastic fitting designed for branching compressed air distribution mains into smaller pipe diameters. Engineered for industrial air systems, inert neutral gases, and centralised vacuum networks, this socket-fusion fitting delivers a PN 12.5 nominal pressure rating at 20 degrees Celsius. Its specialized ductile vinyl composition ensures shatter-resistant operation under severe workshop conditions.

Applications

The GIRAIR 90 degrees reducing tee provides dependable lateral branch connections from primary delivery mains to intermediate drops and tool drop-legs. It ensures full-bore flow profiles with minimized pressure drop while offering comprehensive resistance to aggressive condensates and synthetic compressor lubricating oils.

The fitting is intended for installation downstream of buffer storage tanks, refrigeration air dryers, and filtration equipment, isolated from primary compressor vibrations. Specific application boundaries exclude medical air networks, flammable gases, and silicon-free operational environments. Furthermore, system lines must never convey lubricants or process fluids formulated with esters, ethoxylates, or amines due to direct chemical incompatibility.

Materials and standards

Molded from a high-grade ductile vinyl-based alloy, the GIRAIR 90 degrees reducing tee complies with French manufacturing standard NF T54-038 and hydrostatic pressure testing according to EN ISO 1167-1. The blue resin formulation achieves Euroclasses fire reaction rating B-s1, d0 in compliance with EN 13501-1, preventing flame spread and burning droplets during direct exposure to fire.

  • Base material: Impact-resistant ductile vinyl alloy with mass-pigmented blue coloring (RAL 5012)
  • Fire reaction rating: Euroclasses B-s1, d0 according to EN 13501-1
  • Dimensional manufacturing standard: NF T54-038 for socket-weld fittings
  • Alternating pressure resistance: Tested to withstand cyclic pressure spikes between 20 and 50 bar under NF T 54-094
  • Thermal characteristics: Vicat softening temperature equal to or greater than 73 degrees Celsius per EN ISO 2507-2 and linear expansion coefficient of 0.095 mm/m degrees Celsius
  • Environmental qualification: Greater than 98 percent recyclable polymer matrix produced in ISO 9001 and ISO 14001 facilities

Installation and jointing

Jointing is performed via cold solvent welding using dedicated CLEANER+ surface primer and 3FIX blue welding polymer cement. This socket-fusion method creates a permanent, molecular-level homogeneous seal across the joint, avoiding any requirement for hot-work permits inside working production plants.

Installers must bevel pipe ends to a 15 degrees angle, deburr cutting edges, and mark the female insertion depth prior to cementing. Following surface preparation with a clean cloth and CLEANER+, 3FIX cement is applied in continuous rotary strokes to both mating components before inserting the pipe straight into the socket without twisting. The assembly must be held motionless for 5 to 10 seconds under standard ambient conditions (between 5 and 35 degrees Celsius) or up to 30 seconds at low temperatures. Hydrostatic testing is executed after full curing, starting with a 1 bar leak test, followed by 3 bar checking, and completing with a hold test at 1.5 times the nominal working pressure.

  Datasheet (PDF)

The GIRAIR 90 degrees reducing tee, manufactured by GIRPI (Aliaxis), is an engineered thermoplastic fitting designed for branching compressed air distribution mains into smaller pipe diameters. Engineered for industrial air systems, inert neutral gases, and centralised vacuum networks, this socket-fusion fitting delivers a PN 12.5 nominal pressure rating at 20 degrees Celsius. Its specialized ductile vinyl composition ensures shatter-resistant operation under severe workshop conditions.

Applications

The GIRAIR 90 degrees reducing tee provides dependable lateral branch connections from primary delivery mains to intermediate drops and tool drop-legs. It ensures full-bore flow profiles with minimized pressure drop while offering comprehensive resistance to aggressive condensates and synthetic compressor lubricating oils.

The fitting is intended for installation downstream of buffer storage tanks, refrigeration air dryers, and filtration equipment, isolated from primary compressor vibrations. Specific application boundaries exclude medical air networks, flammable gases, and silicon-free operational environments. Furthermore, system lines must never convey lubricants or process fluids formulated with esters, ethoxylates, or amines due to direct chemical incompatibility.

Materials and standards

Molded from a high-grade ductile vinyl-based alloy, the GIRAIR 90 degrees reducing tee complies with French manufacturing standard NF T54-038 and hydrostatic pressure testing according to EN ISO 1167-1. The blue resin formulation achieves Euroclasses fire reaction rating B-s1, d0 in compliance with EN 13501-1, preventing flame spread and burning droplets during direct exposure to fire.

  • Base material: Impact-resistant ductile vinyl alloy with mass-pigmented blue coloring (RAL 5012)
  • Fire reaction rating: Euroclasses B-s1, d0 according to EN 13501-1
  • Dimensional manufacturing standard: NF T54-038 for socket-weld fittings
  • Alternating pressure resistance: Tested to withstand cyclic pressure spikes between 20 and 50 bar under NF T 54-094
  • Thermal characteristics: Vicat softening temperature equal to or greater than 73 degrees Celsius per EN ISO 2507-2 and linear expansion coefficient of 0.095 mm/m degrees Celsius
  • Environmental qualification: Greater than 98 percent recyclable polymer matrix produced in ISO 9001 and ISO 14001 facilities

Installation and jointing

Jointing is performed via cold solvent welding using dedicated CLEANER+ surface primer and 3FIX blue welding polymer cement. This socket-fusion method creates a permanent, molecular-level homogeneous seal across the joint, avoiding any requirement for hot-work permits inside working production plants.

Installers must bevel pipe ends to a 15 degrees angle, deburr cutting edges, and mark the female insertion depth prior to cementing. Following surface preparation with a clean cloth and CLEANER+, 3FIX cement is applied in continuous rotary strokes to both mating components before inserting the pipe straight into the socket without twisting. The assembly must be held motionless for 5 to 10 seconds under standard ambient conditions (between 5 and 35 degrees Celsius) or up to 30 seconds at low temperatures. Hydrostatic testing is executed after full curing, starting with a 1 bar leak test, followed by 3 bar checking, and completing with a hold test at 1.5 times the nominal working pressure.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 20 mm
D 16 mm
GATR2016
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
D 16 mm
GATR2516
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
D 20 mm
GATR2520
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
D 16 mm
GATR3216
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
D 20 mm
GATR3220
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
D 25 mm
GATR3225
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
D 20 mm
GATR4020
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
D 25 mm
GATR4025
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
D 32 mm
GATR4032
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
D 25 mm
GATR5025
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
D 32 mm
GATR5032
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
D 20 mm
GATR6320
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
D 25 mm
GATR6325
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
D 32 mm
GATR6332
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
D 40 mm
GATR6340
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
D 25 mm
GATR7525
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 75 mm
D 32 mm
GATR7532
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 90 mm
D 25 mm
GATR9025
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 110 mm
D 32 mm
GATR1132
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: GATR2016
D: 20 mm
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: GATR2516
D: 25 mm
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: GATR2520
D: 25 mm
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GATR3216
D: 32 mm
D: 16 mm
Ships in 24 hours
On Request / pcs
SKU: GATR3220
D: 32 mm
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GATR3225
D: 32 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR4020
D: 40 mm
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GATR4025
D: 40 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR4032
D: 40 mm
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GATR5025
D: 50 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR5032
D: 50 mm
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GATR6320
D: 63 mm
D: 20 mm
Ships in 24 hours
On Request / pcs
SKU: GATR6325
D: 63 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR6332
D: 63 mm
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GATR6340
D: 63 mm
D: 40 mm
Ships in 24 hours
On Request / pcs
SKU: GATR7525
D: 75 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR7532
D: 75 mm
D: 32 mm
Ships in 24 hours
On Request / pcs
SKU: GATR9025
D: 90 mm
D: 25 mm
Ships in 24 hours
On Request / pcs
SKU: GATR1132
D: 110 mm
D: 32 mm
Ships in 24 hours
On Request / pcs