Union compressed air
The GIRPI GIRAIR 3-piece union is a detachable solvent-cement fitting designed for industrial compressed air distribution and neutral gas networks. Featuring metric socket-by-socket ends from d16 to d63 mm and an integrated EPDM flat gasket, the fitting enables simple mechanical dismantling of pipeline sections for maintenance and inspection without cutting the pipework. Built from a ductile vinyl-based alloy, it delivers PN 12.5 nominal pressure performance at ambient operating temperatures.
Technical specifications
The union provides a dependable, pressure-rated detachable connection between pipework segments while ensuring airtight service across continuous operational cycles.
- Nominal pressure rating: PN 12.5 at fluid temperatures between -10 degrees C and 25 degrees C (14 degrees F to 77 degrees F).
- Maximum operating temperature: 40 degrees C (104 degrees F) with continuous service rating up to 10 bar (145 psi).
- Connection type: socket by socket (Soc. x Soc.) solvent-welded joints.
- Sealing element: high-grade EPDM flat gasket integrated within the three-piece mechanical joint.
- Fire reaction performance: Euroclasses B-s1,d0 rating according to EN 13501-1.
- Operational restrictions: unsuitable for medical air networks, flammable gases, or silicone-free installations.
Materials and standards
Manufactured from an amorphous ductile vinyl alloy, the fitting maintains superior resistance to impacts and mechanical shocks even at low temperatures down to -10 degrees C (14 degrees F). Under extreme impact overload, the ductile structure resists splintering and fragmentation to safeguard operating personnel.
Dimensional conformity complies strictly with NF T54-038 for thermoplastic fittings. GIRAIR materials resist condensation and normal synthetic or mineral compressor lubricating oils, while fluids or lubricants formulated with amines, ethoxyls, or esters are strictly prohibited to avoid chemical deterioration.
Installation and jointing
Jointing requires chemical solvent welding using dedicated system primers and adhesives to form an irreversible, homogeneous joint. The two socket tails are welded directly onto the pipe ends before the union nut is mechanically tightened against the EPDM sealing face.
Pipe ends must be chamfered at a 15-degree angle, deburred, and cleaned using GIRPI CLEANER+ on a clean, lint-free cloth. Application of 3FIX welding polymer creates a fully airtight joint without twisting the components during insertion. Installers must ensure pipes are supported with MONOKLIP brackets to facilitate longitudinal expansion and prevent mechanical strain on the assembled union.
The GIRPI GIRAIR 3-piece union is a detachable solvent-cement fitting designed for industrial compressed air distribution and neutral gas networks. Featuring metric socket-by-socket ends from d16 to d63 mm and an integrated EPDM flat gasket, the fitting enables simple mechanical dismantling of pipeline sections for maintenance and inspection without cutting the pipework. Built from a ductile vinyl-based alloy, it delivers PN 12.5 nominal pressure performance at ambient operating temperatures.
Technical specifications
The union provides a dependable, pressure-rated detachable connection between pipework segments while ensuring airtight service across continuous operational cycles.
- Nominal pressure rating: PN 12.5 at fluid temperatures between -10 degrees C and 25 degrees C (14 degrees F to 77 degrees F).
- Maximum operating temperature: 40 degrees C (104 degrees F) with continuous service rating up to 10 bar (145 psi).
- Connection type: socket by socket (Soc. x Soc.) solvent-welded joints.
- Sealing element: high-grade EPDM flat gasket integrated within the three-piece mechanical joint.
- Fire reaction performance: Euroclasses B-s1,d0 rating according to EN 13501-1.
- Operational restrictions: unsuitable for medical air networks, flammable gases, or silicone-free installations.
Materials and standards
Manufactured from an amorphous ductile vinyl alloy, the fitting maintains superior resistance to impacts and mechanical shocks even at low temperatures down to -10 degrees C (14 degrees F). Under extreme impact overload, the ductile structure resists splintering and fragmentation to safeguard operating personnel.
Dimensional conformity complies strictly with NF T54-038 for thermoplastic fittings. GIRAIR materials resist condensation and normal synthetic or mineral compressor lubricating oils, while fluids or lubricants formulated with amines, ethoxyls, or esters are strictly prohibited to avoid chemical deterioration.
Installation and jointing
Jointing requires chemical solvent welding using dedicated system primers and adhesives to form an irreversible, homogeneous joint. The two socket tails are welded directly onto the pipe ends before the union nut is mechanically tightened against the EPDM sealing face.
Pipe ends must be chamfered at a 15-degree angle, deburred, and cleaned using GIRPI CLEANER+ on a clean, lint-free cloth. Application of 3FIX welding polymer creates a fully airtight joint without twisting the components during insertion. Installers must ensure pipes are supported with MONOKLIP brackets to facilitate longitudinal expansion and prevent mechanical strain on the assembled union.
| Size | SKU | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|
|
D
10 mm
|
GA3P16 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
15
|
GA3P20 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
20 mm
|
GA3P25 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
|
GA3P32 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
|
GA3P40 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
|
GA3P50 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
|
GA3P63 | pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|