Wide Range PE Restraint Adaptor WAGA PN16
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer Waga wide-range PE restraint adaptor is an engineered mechanical fitting designed for tensile-resistant jointing of polyethylene pipelines in water, gas, and wastewater networks. Rated for nominal operating pressures up to PN16, this fitting securely couples spigot pipe ends while compensating for thermal expansion, soil settlement, and ground movements without requiring external thrust blocks or complex anchoring hardware.
Technical specifications
The WAGA wide-range restraint adaptor delivers fully end-load-resistant pipe connections rated for continuous PN16 service across municipal and industrial pressure systems. Its integrated gripping and sealing system accommodates significant pipeline tolerances and angular misalignments during installation and service.
- Nominal pressure rating: PN16 (16 bar working pressure for potable water, wastewater, and approved gas distribution).
- Angular deflection: Accommodates up to 8 degrees of allowable angular misalignment at the joint interface.
- Outer diameter range: Wide-range tolerance accommodating nominal polyethylene pipe outside diameters from 50 mm to 315 mm.
- Corrosion protection: Fusion-bonded Resicoat® RT 9000 R4 epoxy powder coating with a minimum layer thickness of 250 µm.
- Chemical resistance: Operational stability across soil and media environments with pH levels ranging from pH 2 to pH 13.
Materials and standards
Manufactured from ductile iron EN-GJS-450-10 in accordance with EN 1563, this adaptor body provides high tensile strength of at least 450 N/mm² and exceptional elongation properties. Every metallic component is selected to resist severe mechanical stresses, chemical aggression, and long-term environmental degradation.
Corrosion protection is achieved through a factory-applied Resicoat® RT 9000 R4 epoxy coating conforming to strict GSK quality guidelines, providing zero porosity under 3 kV spark testing and high impact resistance up to 20 Joules. The mechanical restraint mechanism utilizes corrosion-proof AISI 316 (A4) stainless steel Uni/Fikser gripping teeth mounted inside durable carrier rings. Threaded fasteners are manufactured from high-tensile stainless steel and pre-treated with Lubo® dry lubricant to eliminate thread galling, binding, and cold welding without requiring messy topical greases.
Installation and jointing
Installation of the WAGA restraint adaptor requires no hot work or specialized fusion equipment, allowing rapid mechanical jointing under demanding field conditions. The fitting provides progressive mechanical gripping that tightens its hold as internal hydraulic pressure or axial tensile loads increase.
When jointing flexible polyethylene pipes (including PE80, PE100, and PE100-RC), an internal stainless steel or composite insert stiffener must be inserted into the pipe end to maintain radial stability under clamping pressure. The Lubo® dry-lubricated fasteners guarantee smooth, consistent torque conversion during bolt tightening, ensuring uniform gasket compression around the pipe circumference. The generous angular capability of up to 8 degrees simplifies alignment in tight trenches and compensates for ongoing differential subsidence throughout the pipeline lifespan.
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer Waga wide-range PE restraint adaptor is an engineered mechanical fitting designed for tensile-resistant jointing of polyethylene pipelines in water, gas, and wastewater networks. Rated for nominal operating pressures up to PN16, this fitting securely couples spigot pipe ends while compensating for thermal expansion, soil settlement, and ground movements without requiring external thrust blocks or complex anchoring hardware.
Technical specifications
The WAGA wide-range restraint adaptor delivers fully end-load-resistant pipe connections rated for continuous PN16 service across municipal and industrial pressure systems. Its integrated gripping and sealing system accommodates significant pipeline tolerances and angular misalignments during installation and service.
- Nominal pressure rating: PN16 (16 bar working pressure for potable water, wastewater, and approved gas distribution).
- Angular deflection: Accommodates up to 8 degrees of allowable angular misalignment at the joint interface.
- Outer diameter range: Wide-range tolerance accommodating nominal polyethylene pipe outside diameters from 50 mm to 315 mm.
- Corrosion protection: Fusion-bonded Resicoat® RT 9000 R4 epoxy powder coating with a minimum layer thickness of 250 µm.
- Chemical resistance: Operational stability across soil and media environments with pH levels ranging from pH 2 to pH 13.
Materials and standards
Manufactured from ductile iron EN-GJS-450-10 in accordance with EN 1563, this adaptor body provides high tensile strength of at least 450 N/mm² and exceptional elongation properties. Every metallic component is selected to resist severe mechanical stresses, chemical aggression, and long-term environmental degradation.
Corrosion protection is achieved through a factory-applied Resicoat® RT 9000 R4 epoxy coating conforming to strict GSK quality guidelines, providing zero porosity under 3 kV spark testing and high impact resistance up to 20 Joules. The mechanical restraint mechanism utilizes corrosion-proof AISI 316 (A4) stainless steel Uni/Fikser gripping teeth mounted inside durable carrier rings. Threaded fasteners are manufactured from high-tensile stainless steel and pre-treated with Lubo® dry lubricant to eliminate thread galling, binding, and cold welding without requiring messy topical greases.
Installation and jointing
Installation of the WAGA restraint adaptor requires no hot work or specialized fusion equipment, allowing rapid mechanical jointing under demanding field conditions. The fitting provides progressive mechanical gripping that tightens its hold as internal hydraulic pressure or axial tensile loads increase.
When jointing flexible polyethylene pipes (including PE80, PE100, and PE100-RC), an internal stainless steel or composite insert stiffener must be inserted into the pipe end to maintain radial stability under clamping pressure. The Lubo® dry-lubricated fasteners guarantee smooth, consistent torque conversion during bolt tightening, ensuring uniform gasket compression around the pipe circumference. The generous angular capability of up to 8 degrees simplifies alignment in tight trenches and compensates for ongoing differential subsidence throughout the pipeline lifespan.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
50 mm
MM
46 - 71
|
709365609 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
MM
46 - 71
|
709365610 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €306.08 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
MM
63 - 90
|
709365611 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €340.30 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
MM
63 - 90
|
709365612 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
MM
84 - 105
|
709365614 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €318.58 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
MM
84 - 105
|
709365615 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €376.49 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
MM
104 - 132
|
709465616 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
MM
104 - 132
|
709365616 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €377.14 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
125 mm
MM
104 - 132
|
709465617 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
MM
132 - 155
|
709465618 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
125 mm
MM
132 - 155
|
709365618 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
140 mm
MM
132 - 155
|
709465619 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
MM
132 - 155
|
709465621 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
MM
154 - 192
|
709365620 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €664.14 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
180 mm
MM
154 - 192
|
709465620 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €664.14 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
200 mm
MM
192 - 232
|
709365624 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €1,018.26 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
225 mm
MM
192 - 232
|
709465624 |
PN: 16 Bar
Material: Cast Iron
|
pcs | €1,018.26 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
250 mm
MM
230 - 268
|
709365625 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
250 mm
MM
267 - 310
|
709365628 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
280 mm
MM
267 - 310
|
709465628 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
315 mm
MM
315 - 356
|
709365632 |
PN: 16 Bar
Material: Cast Iron
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|