Diaphragm valve DIASTAR TenPlus FC PVDF

Diaphragm valve DIASTAR TenPlus FC PVDF

Material: PVDF PN: 10 Bar

  Datasheet (PDF)

The Georg Fischer SYGEF Standard DIASTAR TenPlus FC diaphragm valve is an engineered pneumatically actuated valve designed for process isolation and precise flow regulation in demanding industrial piping systems. Built with an unpigmented polyvinylidene fluoride (PVDF) body and an integrated fail-safe-to-close pneumatic actuator, this unit provides dependable hermetic shut-off upon pilot air loss. Operating at pressures up to 10 bar across dimensions d20 to d63 mm, it serves engineers handling high-purity water and aggressive chemicals.

Technical specifications

This pneumatic diaphragm valve combines a fail-safe-to-close spring actuator with a rugged PVDF body engineered for bidirectional flow control up to 10 bar. It delivers consistent linear flow characteristics and hermetic sealing under continuous operating conditions.

  • Nominal pressure: Rated for working pressures up to 10 bar at 20 degrees C.
  • Size range: Available in metric outer diameters from d20 mm to d63 mm (DN15 to DN50).
  • Operating temperature: Broad thermal resistance extending from -20 degrees C to +140 degrees C.
  • Actuation mode: Pneumatic fail-safe-to-close (FC) mechanism with integrated mechanical position feedback.
  • Flow profile: Optimised internal geometry yielding low pressure loss and preventing medium stagnation.

Materials and standards

Constructed from unpigmented PVDF with high chemical purity, the valve body satisfies stringent international quality and hygiene standards. The housing utilizes glass-fiber reinforced polypropylene to endure aggressive atmospheric conditions in industrial plant environments.

The PVDF fluoropolymer exhibits high tensile rigidity with an elastic modulus of at least 1800 N/mm2, along with proven chemical resistance against concentrated oxidizing acids, non-oxidizing acids, aliphatic hydrocarbons, and salts. With an internal surface roughness Ra not exceeding 0.5 micrometres, the valve complies with ISO 10931 dimensional requirements and satisfies FDA 21 CFR § 177.2510 and USP Class VI physiological safety regulations.

Installation and jointing

The valve is configured with metric socket fusion ends designed for direct thermal joining into SYGEF PVDF piping networks. Controlled heating creates reliable homogeneous joints without chemical cements or mechanical gaskets.

Jointing follows DVS 2207-15 guidelines using standard heated-tool socket welding equipment. The compact actuator envelope allows inline maintenance without removing the valve body from the pipe line. As an authorised Georg Fischer distributor, BigWeld supplies the DIASTAR TenPlus FC valve alongside certified fusion tooling and comprehensive technical support for demanding industrial process plants.

  Datasheet (PDF)

The Georg Fischer SYGEF Standard DIASTAR TenPlus FC diaphragm valve is an engineered pneumatically actuated valve designed for process isolation and precise flow regulation in demanding industrial piping systems. Built with an unpigmented polyvinylidene fluoride (PVDF) body and an integrated fail-safe-to-close pneumatic actuator, this unit provides dependable hermetic shut-off upon pilot air loss. Operating at pressures up to 10 bar across dimensions d20 to d63 mm, it serves engineers handling high-purity water and aggressive chemicals.

Technical specifications

This pneumatic diaphragm valve combines a fail-safe-to-close spring actuator with a rugged PVDF body engineered for bidirectional flow control up to 10 bar. It delivers consistent linear flow characteristics and hermetic sealing under continuous operating conditions.

  • Nominal pressure: Rated for working pressures up to 10 bar at 20 degrees C.
  • Size range: Available in metric outer diameters from d20 mm to d63 mm (DN15 to DN50).
  • Operating temperature: Broad thermal resistance extending from -20 degrees C to +140 degrees C.
  • Actuation mode: Pneumatic fail-safe-to-close (FC) mechanism with integrated mechanical position feedback.
  • Flow profile: Optimised internal geometry yielding low pressure loss and preventing medium stagnation.

Materials and standards

Constructed from unpigmented PVDF with high chemical purity, the valve body satisfies stringent international quality and hygiene standards. The housing utilizes glass-fiber reinforced polypropylene to endure aggressive atmospheric conditions in industrial plant environments.

The PVDF fluoropolymer exhibits high tensile rigidity with an elastic modulus of at least 1800 N/mm2, along with proven chemical resistance against concentrated oxidizing acids, non-oxidizing acids, aliphatic hydrocarbons, and salts. With an internal surface roughness Ra not exceeding 0.5 micrometres, the valve complies with ISO 10931 dimensional requirements and satisfies FDA 21 CFR § 177.2510 and USP Class VI physiological safety regulations.

Installation and jointing

The valve is configured with metric socket fusion ends designed for direct thermal joining into SYGEF PVDF piping networks. Controlled heating creates reliable homogeneous joints without chemical cements or mechanical gaskets.

Jointing follows DVS 2207-15 guidelines using standard heated-tool socket welding equipment. The compact actuator envelope allows inline maintenance without removing the valve body from the pipe line. As an authorised Georg Fischer distributor, BigWeld supplies the DIASTAR TenPlus FC valve alongside certified fusion tooling and comprehensive technical support for demanding industrial process plants.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
D 20 mm
185685032
Material: PVDF
PN: 10 Bar
pcs €790.67
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 25 mm
185685033
Material: PVDF
PN: 10 Bar
pcs €834.13
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 32 mm
185685034
Material: PVDF
PN: 10 Bar
pcs €895.79
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 40 mm
185685035
Material: PVDF
PN: 10 Bar
pcs €1,120.84
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 50 mm
185685036
Material: PVDF
PN: 10 Bar
pcs €1,398.89
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
D 63 mm
185685037
Material: PVDF
PN: 10 Bar
pcs €1,711.67
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: 185685032
D: 20 mm
Ships in 24 hours
€790.67 / pcs
SKU: 185685033
D: 25 mm
Ships in 24 hours
€834.13 / pcs
SKU: 185685034
D: 32 mm
Ships in 24 hours
€895.79 / pcs
SKU: 185685035
D: 40 mm
Ships in 24 hours
€1,120.84 / pcs
SKU: 185685036
D: 50 mm
Ships in 24 hours
€1,398.89 / pcs
SKU: 185685037
D: 63 mm
Ships in 24 hours
€1,711.67 / pcs