Tapping saddle monobloc PE100 with Gas Stop d40mm 1-5 bar
Datasheet (PDF) | | | Product Range | | | Instructional Video
The Georg Fischer ELGEF Plus PE100 monobloc tapping saddle d40mm with integrated Gas Stop is an electrofusion fitting for live, under-pressure branching of polyethylene gas distribution mains working between 1 and 5 bar. Developed for utility engineers and municipal gas contractors, it unites tapping, sealing and excess-flow protection in one factory-assembled body with a service outlet for d20 mm or d32 mm connections.
Technical specifications
The saddle is dimensioned for d40 mm mains with pipe SDR compatibility from SDR 9 to SDR 11 and carries an integral excess flow valve that shuts off the service line automatically.
- Main pipe: d40 mm, pipe SDR 9 to SDR 11
- Operating pressure: 1 to 5 bar, natural gas and LPG distribution networks
- Safety device: integrated Pipelife Gas-Stop excess flow valve for automatic shut-off
- Service outlet: long fusion spigot for d20 mm or d32 mm electrofusion couplers
- Fusion terminals: 4 mm pin connectors with limited-path fusion indicators
- Internal cutter: rotating brass cutter with mechanical top and bottom travel stops
Materials and standards
The fitting is moulded entirely from 100% virgin high-density polyethylene PE100 resin approved by the PE100+ Association, in black RAL 9005, and complies with EN 1555-3 for gas applications. It is DVGW and KIWA approved and supports the estimated 100-year service life of a utility network.
PE100 has a density of approximately 0.95 g/cm³, a yield stress of 25 N/mm² and a tensile E-modulus of 900 N/mm² at 23 degrees C, with Charpy notched impact strength of 83 kJ/m² at 23 degrees C and 13 kJ/m² at minus 40 degrees C, giving high resistance to rapid crack propagation and environmental stress cracking.
Installation and jointing
The saddle is electrofused onto the main through its 4 mm pin connectors, the limited-path fusion indicators confirming that the weld cycle has been completed before the main is drilled.
Once the joint has cooled, the integrated brass cutter is driven down to perforate the main; its mechanical travel stops define the open and closed positions, while the monobloc body contains the full line pressure during the operation. No external tapping machine or gas bagging is required, so the branch is made without gas escape or interruption of supply. The service line is then welded to the outlet spigot with a standard d20 mm or d32 mm electrofusion coupler, after which the Gas Stop valve remains on duty and closes the branch instantly in the event of a downstream rupture or excavation pull-out.
Datasheet (PDF) | | | Product Range | | | Instructional Video
The Georg Fischer ELGEF Plus PE100 monobloc tapping saddle d40mm with integrated Gas Stop is an electrofusion fitting for live, under-pressure branching of polyethylene gas distribution mains working between 1 and 5 bar. Developed for utility engineers and municipal gas contractors, it unites tapping, sealing and excess-flow protection in one factory-assembled body with a service outlet for d20 mm or d32 mm connections.
Technical specifications
The saddle is dimensioned for d40 mm mains with pipe SDR compatibility from SDR 9 to SDR 11 and carries an integral excess flow valve that shuts off the service line automatically.
- Main pipe: d40 mm, pipe SDR 9 to SDR 11
- Operating pressure: 1 to 5 bar, natural gas and LPG distribution networks
- Safety device: integrated Pipelife Gas-Stop excess flow valve for automatic shut-off
- Service outlet: long fusion spigot for d20 mm or d32 mm electrofusion couplers
- Fusion terminals: 4 mm pin connectors with limited-path fusion indicators
- Internal cutter: rotating brass cutter with mechanical top and bottom travel stops
Materials and standards
The fitting is moulded entirely from 100% virgin high-density polyethylene PE100 resin approved by the PE100+ Association, in black RAL 9005, and complies with EN 1555-3 for gas applications. It is DVGW and KIWA approved and supports the estimated 100-year service life of a utility network.
PE100 has a density of approximately 0.95 g/cm³, a yield stress of 25 N/mm² and a tensile E-modulus of 900 N/mm² at 23 degrees C, with Charpy notched impact strength of 83 kJ/m² at 23 degrees C and 13 kJ/m² at minus 40 degrees C, giving high resistance to rapid crack propagation and environmental stress cracking.
Installation and jointing
The saddle is electrofused onto the main through its 4 mm pin connectors, the limited-path fusion indicators confirming that the weld cycle has been completed before the main is drilled.
Once the joint has cooled, the integrated brass cutter is driven down to perforate the main; its mechanical travel stops define the open and closed positions, while the monobloc body contains the full line pressure during the operation. No external tapping machine or gas bagging is required, so the branch is made without gas escape or interruption of supply. The service line is then welded to the outlet spigot with a standard d20 mm or d32 mm electrofusion coupler, after which the Gas Stop valve remains on duty and closes the branch instantly in the event of a downstream rupture or excavation pull-out.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
D
40 mm
|
193281113 |
PN: 1-5 bar
Material: Polyethylene
SDR: 11
|
pcs | €148.02 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
D
40 mm
|
193281152 |
PN: 1-5 bar
Material: Polyethylene
SDR: 11
|
pcs | €168.18 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|