PP-H Standard Lug-Style Butterfly Valve Type 243 FC
The Georg Fischer PROGEF Standard Type 243 lug-style butterfly valve delivers automated isolation and throttling control for industrial chemical processing, water treatment, and manufacturing systems. Driven by a single-acting pneumatic actuator configured for fail-safe-to-close (FC) operation, the unit provides emergency spring-return shut-off during pilot air interruptions. Fabricated from glass-fiber reinforced polypropylene with stainless steel inserts and a PP-H disc, it ensures dependable industrial fluid handling across metric pipe dimensions from d63 mm to d315 mm.
Technical specifications
The Type 243 pneumatic actuator utilizes integrated mechanical springs to drive the disc into a bubble-tight closed position immediately upon losing pilot air pressure. Standardized mechanical coupling maintains backlash-free torque transmission to the valve stem across continuous cycling.
- Actuation type: Single-acting pneumatic actuator, fail-safe-to-close (FC) spring return.
- Size range: Metric dimensions d63 mm up to d315 mm.
- Accessory mounting: Standardized NAMUR interface conforming to VDI/VDE 3845.
- Position indication: Integrated optical visual indicator for rapid status monitoring.
- Shut-off sealing: Bidirectional bubble-tight isolation with factory-fitted EPDM or FKM liners.
- Pressure ratings: Operating pressures rated at 5 bar, 8 bar, or 10 bar depending on dimension.
Materials and standards
Constructed entirely from premium engineered thermoplastics and corrosion-resistant alloys, the valve assembly resists aggressive chemicals and mechanical stresses. High-grade materials safeguard fluid purity while maintaining structural integrity in challenging plant environments.
The outer valve housing is injection-molded from glass-fiber reinforced polypropylene (PP-GF30) to provide superior rigidity and dimensional stability under pipeline loads. In wetted contact with the process fluid, the valve disc consists of pure polypropylene homopolymer (PP-H). Precision-machined SS316 stainless steel threaded inserts are embedded directly into the lug ears, protecting the casing against mechanical thread stripping and environmental corrosion. Elastomer seals are available in both EPDM and FKM to meet specific chemical compatibility requirements.
Installation and jointing
The threaded lug-style body allows direct bolt attachment between pipeline companion flanges for both in-line flow control and end-of-line terminal isolation. Its integrated threaded inserts permit independent bolt tightening from either side of the flange connection.
When deployed in dead-end terminal service, the downstream piping network can be safely unbolted, removed, or serviced while the upstream section remains pressurized under full working conditions. Pneumatic pilot connections and auxiliary accessories, including pilot solenoid valves, limit switch boxes, and electro-pneumatic positioners, install directly to the top NAMUR VDI/VDE 3845 interface without custom bracket adaptations. As an authorised Georg Fischer distributor, BigWeld supplies the complete PROGEF Type 243 pneumatic valve series with original manufacturer technical documentation and dedicated support.
The Georg Fischer PROGEF Standard Type 243 lug-style butterfly valve delivers automated isolation and throttling control for industrial chemical processing, water treatment, and manufacturing systems. Driven by a single-acting pneumatic actuator configured for fail-safe-to-close (FC) operation, the unit provides emergency spring-return shut-off during pilot air interruptions. Fabricated from glass-fiber reinforced polypropylene with stainless steel inserts and a PP-H disc, it ensures dependable industrial fluid handling across metric pipe dimensions from d63 mm to d315 mm.
Technical specifications
The Type 243 pneumatic actuator utilizes integrated mechanical springs to drive the disc into a bubble-tight closed position immediately upon losing pilot air pressure. Standardized mechanical coupling maintains backlash-free torque transmission to the valve stem across continuous cycling.
- Actuation type: Single-acting pneumatic actuator, fail-safe-to-close (FC) spring return.
- Size range: Metric dimensions d63 mm up to d315 mm.
- Accessory mounting: Standardized NAMUR interface conforming to VDI/VDE 3845.
- Position indication: Integrated optical visual indicator for rapid status monitoring.
- Shut-off sealing: Bidirectional bubble-tight isolation with factory-fitted EPDM or FKM liners.
- Pressure ratings: Operating pressures rated at 5 bar, 8 bar, or 10 bar depending on dimension.
Materials and standards
Constructed entirely from premium engineered thermoplastics and corrosion-resistant alloys, the valve assembly resists aggressive chemicals and mechanical stresses. High-grade materials safeguard fluid purity while maintaining structural integrity in challenging plant environments.
The outer valve housing is injection-molded from glass-fiber reinforced polypropylene (PP-GF30) to provide superior rigidity and dimensional stability under pipeline loads. In wetted contact with the process fluid, the valve disc consists of pure polypropylene homopolymer (PP-H). Precision-machined SS316 stainless steel threaded inserts are embedded directly into the lug ears, protecting the casing against mechanical thread stripping and environmental corrosion. Elastomer seals are available in both EPDM and FKM to meet specific chemical compatibility requirements.
Installation and jointing
The threaded lug-style body allows direct bolt attachment between pipeline companion flanges for both in-line flow control and end-of-line terminal isolation. Its integrated threaded inserts permit independent bolt tightening from either side of the flange connection.
When deployed in dead-end terminal service, the downstream piping network can be safely unbolted, removed, or serviced while the upstream section remains pressurized under full working conditions. Pneumatic pilot connections and auxiliary accessories, including pilot solenoid valves, limit switch boxes, and electro-pneumatic positioners, install directly to the top NAMUR VDI/VDE 3845 interface without custom bracket adaptations. As an authorised Georg Fischer distributor, BigWeld supplies the complete PROGEF Type 243 pneumatic valve series with original manufacturer technical documentation and dedicated support.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
63 mm
Gasket
FKM
|
199243302 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €1,535.04 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
Gasket
FKM
|
199243303 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €1,618.60 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
Gasket
EPDM
|
199243284 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €1,871.89 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
Gasket
FKM
|
199243304 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €1,947.59 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
Gasket
FKM
|
199243305 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €2,273.94 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
140 mm
Gasket
EPDM
|
199243286 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €2,529.78 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
140 mm
Gasket
FKM
|
199243306 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €2,628.99 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
Gasket
EPDM
|
199243287 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €2,973.58 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
160 mm
Gasket
FKM
|
199243307 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €3,093.68 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
225 mm
Gasket
EPDM
|
199243288 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €3,688.91 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
225 mm
Gasket
FKM
|
199243308 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €3,931.73 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
280 mm
Gasket
EPDM
|
199243289 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €6,271.19 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
280 mm
Gasket
FKM
|
199243309 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €6,683.88 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
315 mm
Gasket
EPDM
|
199243290 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €7,525.41 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
315 mm
Gasket
FKM
|
199243310 |
Material: PP-GF30 / SS316
PN: 5-8-10 Bar
|
pcs | €8,020.68 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|