Single layer PE-HD water meter chamber D500-D1000
The single layer PE-HD water meter chamber is a buried, watertight housing for drinking water meters and isolation valves on municipal mains and on residential or industrial service connections. The single-wall high-density polyethylene body is supplied in D500, D800 and D1000 with heights of 800, 1200 and 1400 mm, sealed at the pipe entries with elastomeric gaskets and closed by an insulating class A15 polyethylene cover.
Technical specifications
The chamber body is a single-wall high-density polyethylene shell that provides ring stiffness and full chemical resistance in corrosive soils and high groundwater tables. Pipe penetrations are sealed with elastomeric rubber gaskets, while the standard non-traffic cover encloses an air chamber that shields the meter assembly from surface frost.
- Nominal diameters: D500, D800 and D1000 chamber body profiles.
- Chamber heights: 800 mm, 1200 mm and 1400 mm, selected to match the local frost line.
- Groundwater sealing: elastomeric entry seals preventing sub-surface water ingress.
- Standard cover: polyethylene non-traffic class A15 with a passive thermal air pocket.
- Cover options: heavy-duty traffic covers in class C250 or D400 on request.
- Configuration: bare chamber body, or pre-equipped with meter brackets and isolation valves.
Applications
The chamber is used on municipal drinking water distribution networks, on individual residential service connections and at metering points of industrial and commercial facilities. Single-meter and multi-meter layouts are both accommodated within the same body diameters.
With the standard A15 cover the chamber is installed in verges, green areas and pedestrian zones. For paved parking bays, access paths and carriageways it is fitted with the optional class C250 or D400 traffic cover, which transfers wheel loads away from the polyethylene shell.
Materials and standards
All structural parts are PE-HD, a material that withstands sulphur compounds, acidic soil moisture and routine chemical aggression without corroding, which is why polyethylene chambers are specified where groundwater levels or aggressive ground conditions rule out concrete structures.
Cover load classes follow the EN 124 classification used throughout the chamber range: A15 for 1.5 tonnes per axle in pedestrian areas, C250 for 25 tonnes per axle on roads and light commercial traffic, D400 for 40 tonnes per axle on carriageways with heavy vehicles. The expected service life of the polyethylene structure exceeds 50 years.
The single layer PE-HD water meter chamber is a buried, watertight housing for drinking water meters and isolation valves on municipal mains and on residential or industrial service connections. The single-wall high-density polyethylene body is supplied in D500, D800 and D1000 with heights of 800, 1200 and 1400 mm, sealed at the pipe entries with elastomeric gaskets and closed by an insulating class A15 polyethylene cover.
Technical specifications
The chamber body is a single-wall high-density polyethylene shell that provides ring stiffness and full chemical resistance in corrosive soils and high groundwater tables. Pipe penetrations are sealed with elastomeric rubber gaskets, while the standard non-traffic cover encloses an air chamber that shields the meter assembly from surface frost.
- Nominal diameters: D500, D800 and D1000 chamber body profiles.
- Chamber heights: 800 mm, 1200 mm and 1400 mm, selected to match the local frost line.
- Groundwater sealing: elastomeric entry seals preventing sub-surface water ingress.
- Standard cover: polyethylene non-traffic class A15 with a passive thermal air pocket.
- Cover options: heavy-duty traffic covers in class C250 or D400 on request.
- Configuration: bare chamber body, or pre-equipped with meter brackets and isolation valves.
Applications
The chamber is used on municipal drinking water distribution networks, on individual residential service connections and at metering points of industrial and commercial facilities. Single-meter and multi-meter layouts are both accommodated within the same body diameters.
With the standard A15 cover the chamber is installed in verges, green areas and pedestrian zones. For paved parking bays, access paths and carriageways it is fitted with the optional class C250 or D400 traffic cover, which transfers wheel loads away from the polyethylene shell.
Materials and standards
All structural parts are PE-HD, a material that withstands sulphur compounds, acidic soil moisture and routine chemical aggression without corroding, which is why polyethylene chambers are specified where groundwater levels or aggressive ground conditions rule out concrete structures.
Cover load classes follow the EN 124 classification used throughout the chamber range: A15 for 1.5 tonnes per axle in pedestrian areas, C250 for 25 tonnes per axle on roads and light commercial traffic, D400 for 40 tonnes per axle on carriageways with heavy vehicles. The expected service life of the polyethylene structure exceeds 50 years.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
Ø
D500 - H800
|
D5H8SS |
Material: PE-HD
|
pcs | €79.88 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
Ø
D500 - H1200
|
D5H12SS |
Material: PE-HD
|
pcs | €88.39 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
Ø
D800 - H1200
|
D8H12SS |
Material: PE-HD
|
pcs | €184.17 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
Ø
D1000 - H1200
|
D10H12SS |
Material: PE-HD
|
pcs | €242.91 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
Ø
D1000 - H1400
|
D10H14SS |
Material: PE-HD
|
pcs | €310.61 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|