Compressed air reducing tee 90° with metal reinforcing ring Rp
The GIRPI GIRAIR reducing tee 90° with metal reinforcing ring provides a dedicated transition branch for compressed air networks, combining solvent-welded metric socket ends with an engineered BSP female threaded branch. Designed for industrial plant engineers and piping installers, this fitting is manufactured from an impact-resistant, ductile vinyl-based polymer rated for PN 12.5 bar service at temperatures up to 25 degrees Celsius, featuring an external metal reinforcement ring to secure threaded drop connections.
Technical specifications
This reducing tee delivers full structural rigidity at branch take-offs while maintaining optimal aerodynamic flow through the system. The integrated metal reinforcing ring prevents radial expansion and stress cracking under mechanical tightening torque.
- Nominal operating pressure: PN 12.5 bar at 20 degrees Celsius (rated at 10 bar from 25 to 40 degrees Celsius)
- Joint configuration: Dual metric female solvent sockets on the run with a 90-degree parallel cylindrical BSP female thread on the branch
- Reaction to fire: Euroclass B-s1, d0 certified according to EN 13501-1, preventing burning droplets and longitudinal flame spread
- Impact resistance: High ductile mechanical behavior verified down to -10 degrees Celsius, eliminating brittle fracturing and splinter projection
- System identification: Mass-dyed safety blue finish matching RAL 5012
Applications
The GIRAIR system is engineered specifically for compressed air distribution lines, centralized vacuum networks, and non-combustible neutral gas systems. It provides high resistance to internal atmospheric corrosion and usual industrial compressor lubricating oils.
Specific operational boundaries must be observed across all installations. The system is not suitable for medical air distribution, flammable gas transportation, or silicone-free operating environments. Transmission of fluids or compressor oils containing amines, esters, or ethoxyls is strictly prohibited.
Installation and jointing
Socket ends are jointed via cold solvent welding, while the threaded branch allows direct mechanical connection to male threaded fittings and equipment. Reliable sealing demands standard preparation and strictly specified sealants.
Pipes must be cut squarely, de-burred, and externally chamfered at an angle of 15 degrees prior to jointing. Both fitting sockets and pipe spigots require cleaning and priming with CLEANER+ before applying 3FIX solvent cement. For threaded connections into the reinforced branch, sealing must be accomplished exclusively using high-density PTFE tape or approved soft silicone paste. The use of anaerobic resins, hemp, and tallow is strictly prohibited to prevent material cracking.
The GIRPI GIRAIR reducing tee 90° with metal reinforcing ring provides a dedicated transition branch for compressed air networks, combining solvent-welded metric socket ends with an engineered BSP female threaded branch. Designed for industrial plant engineers and piping installers, this fitting is manufactured from an impact-resistant, ductile vinyl-based polymer rated for PN 12.5 bar service at temperatures up to 25 degrees Celsius, featuring an external metal reinforcement ring to secure threaded drop connections.
Technical specifications
This reducing tee delivers full structural rigidity at branch take-offs while maintaining optimal aerodynamic flow through the system. The integrated metal reinforcing ring prevents radial expansion and stress cracking under mechanical tightening torque.
- Nominal operating pressure: PN 12.5 bar at 20 degrees Celsius (rated at 10 bar from 25 to 40 degrees Celsius)
- Joint configuration: Dual metric female solvent sockets on the run with a 90-degree parallel cylindrical BSP female thread on the branch
- Reaction to fire: Euroclass B-s1, d0 certified according to EN 13501-1, preventing burning droplets and longitudinal flame spread
- Impact resistance: High ductile mechanical behavior verified down to -10 degrees Celsius, eliminating brittle fracturing and splinter projection
- System identification: Mass-dyed safety blue finish matching RAL 5012
Applications
The GIRAIR system is engineered specifically for compressed air distribution lines, centralized vacuum networks, and non-combustible neutral gas systems. It provides high resistance to internal atmospheric corrosion and usual industrial compressor lubricating oils.
Specific operational boundaries must be observed across all installations. The system is not suitable for medical air distribution, flammable gas transportation, or silicone-free operating environments. Transmission of fluids or compressor oils containing amines, esters, or ethoxyls is strictly prohibited.
Installation and jointing
Socket ends are jointed via cold solvent welding, while the threaded branch allows direct mechanical connection to male threaded fittings and equipment. Reliable sealing demands standard preparation and strictly specified sealants.
Pipes must be cut squarely, de-burred, and externally chamfered at an angle of 15 degrees prior to jointing. Both fitting sockets and pipe spigots require cleaning and priming with CLEANER+ before applying 3FIX solvent cement. For threaded connections into the reinforced branch, sealing must be accomplished exclusively using high-density PTFE tape or approved soft silicone paste. The use of anaerobic resins, hemp, and tallow is strictly prohibited to prevent material cracking.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
Thread
1/2"
|
GATG2012 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
Thread
3/4"
|
GATG2534 |
Material: PVC
|
pcs | On Request |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|