Backing flange PP-V d250-400 mm PN10 (butt fusion)
Datasheet (PDF) | | | Product Range | | | Instructional Video
The Georg Fischer PP-V backing flange d250-400 mm PN10 is a full-plastic loose flange engineered for polyethylene piping assemblies using butt fusion stub ends. Designed for utility networks, water treatment, and industrial chemical process installations, this flange establishes a reliable flanged joint between thermoplastic pipelines and pumps, valves, or tanks. BigWeld, an authorised Georg Fischer distributor, supplies this robust thermoplastic component for projects where metal backing rings corrode rapidly.
Materials and standards
The flange is manufactured from polypropylene reinforced with 30 percent glass fibres (PP-GF), providing outstanding dimensional stability and mechanical strength under high tightening torques. This modern composite construction eliminates all corrosion risks associated with metallic backing rings in harsh operating environments.
Unlike conventional coated ductile iron or carbon steel rings that suffer from paint chipping, rust, and galvanic attack, full-plastic PP-GF remains immune to chemical degradation across acidic, alkaline, and saline conditions. The flange bolt patterns conform strictly to EN 1092, ISO 7005, and DIN 2501 PN10. Diameters d250 and d280 feature combined metric-ANSI drilling, allowing seamless connection across international pipeline standards. In addition, the material is well-suited for direct burial in corrosive soils and outdoor exposure in aggressive industrial atmospheres.
Technical specifications
Engineered for heavy-duty metric polyethylene networks, the PP-V backing flange delivers continuous PN10 pressure capability across the complete d250 to d400 mm diameter range. The load-bearing profile distributes bolt pre-stress evenly across the PE stub face to prevent joint distortion.
- Product type: full-plastic PP-V backing flange for PE stub flanges
- Manufacturer: Georg Fischer
- Material formulation: polypropylene reinforced with 30 percent glass fibres (PP-GF)
- Dimensional range: pipe outer diameter d250 mm to d400 mm (DN250 to DN400)
- Nominal pressure rating: PN10 (10 bar operating pressure)
- Drilling compatibility: EN 1092, ISO 7005, DIN 2501 PN10 (combined metric-ANSI on d250 and d280)
Installation and jointing
Proper installation requires aligning the backing flange behind the butt-welded PE stub end and tightening corrosion-resistant bolts in a cross pattern to the specified torque limits. The precision bolt circle accommodates 8 to 16 fasteners sized M16 to M24 depending on fitting diameter.
The structural geometry supports uniform compression of the elastomeric flange gasket against the PE stub flange face, maintaining a bubble-tight seal under thermal cycling and working pressure surges. Installers must use flat washers beneath bolt heads and nuts to protect the composite flange body from point loading during torque application.
Datasheet (PDF) | | | Product Range | | | Instructional Video
The Georg Fischer PP-V backing flange d250-400 mm PN10 is a full-plastic loose flange engineered for polyethylene piping assemblies using butt fusion stub ends. Designed for utility networks, water treatment, and industrial chemical process installations, this flange establishes a reliable flanged joint between thermoplastic pipelines and pumps, valves, or tanks. BigWeld, an authorised Georg Fischer distributor, supplies this robust thermoplastic component for projects where metal backing rings corrode rapidly.
Materials and standards
The flange is manufactured from polypropylene reinforced with 30 percent glass fibres (PP-GF), providing outstanding dimensional stability and mechanical strength under high tightening torques. This modern composite construction eliminates all corrosion risks associated with metallic backing rings in harsh operating environments.
Unlike conventional coated ductile iron or carbon steel rings that suffer from paint chipping, rust, and galvanic attack, full-plastic PP-GF remains immune to chemical degradation across acidic, alkaline, and saline conditions. The flange bolt patterns conform strictly to EN 1092, ISO 7005, and DIN 2501 PN10. Diameters d250 and d280 feature combined metric-ANSI drilling, allowing seamless connection across international pipeline standards. In addition, the material is well-suited for direct burial in corrosive soils and outdoor exposure in aggressive industrial atmospheres.
Technical specifications
Engineered for heavy-duty metric polyethylene networks, the PP-V backing flange delivers continuous PN10 pressure capability across the complete d250 to d400 mm diameter range. The load-bearing profile distributes bolt pre-stress evenly across the PE stub face to prevent joint distortion.
- Product type: full-plastic PP-V backing flange for PE stub flanges
- Manufacturer: Georg Fischer
- Material formulation: polypropylene reinforced with 30 percent glass fibres (PP-GF)
- Dimensional range: pipe outer diameter d250 mm to d400 mm (DN250 to DN400)
- Nominal pressure rating: PN10 (10 bar operating pressure)
- Drilling compatibility: EN 1092, ISO 7005, DIN 2501 PN10 (combined metric-ANSI on d250 and d280)
Installation and jointing
Proper installation requires aligning the backing flange behind the butt-welded PE stub end and tightening corrosion-resistant bolts in a cross pattern to the specified torque limits. The precision bolt circle accommodates 8 to 16 fasteners sized M16 to M24 depending on fitting diameter.
The structural geometry supports uniform compression of the elastomeric flange gasket against the PE stub flange face, maintaining a bubble-tight seal under thermal cycling and working pressure surges. Installers must use flat washers beneath bolt heads and nuts to protect the composite flange body from point loading during torque application.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
250 mm
|
727700521 |
Material: PP-V
PN: 10 Bar
|
pcs | €104.76 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
280 mm
|
727700522 |
Material: PP-V
PN: 10 Bar
|
pcs | €104.76 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
315 mm
|
727700523 |
Material: PP-V
PN: 10 Bar
|
pcs | €153.20 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
355 mm
|
727700524 |
Material: PP-V
PN: 10 Bar
|
pcs | €297.30 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
400 mm
|
727700525 |
Material: PP-V
PN: 10 Bar
|
pcs | €338.34 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|