Wall Plate with 4 Outlets

Wall Plate with 4 Outlets

Material: PVC

  Datasheet (PDF)

The GIRPI GIRAIR wall plate with 4 outlets provides a rigid terminal distribution manifold for industrial compressed air networks. Featuring an upper supply inlet of G 1/2" or G 3/4" and four front-facing G 1/2" female threaded ports, this fitting enables multiple pneumatic drops from a single wall-mounted anchor. It is engineered for compressed air, neutral gases, and industrial vacuum lines operating at PN 12.5 nominal pressure.

Technical specifications

The wall plate distributes clean compressed air from an overhead branch to up to four service connections simultaneously. Its geometry maintains steady airflow while withstanding continuous industrial workshop duties.

  • Nominal operating pressure: PN 12.5 (12.5 bar from -10 degrees Celsius to 25 degrees Celsius; 10 bar up to 40 degrees Celsius)
  • Supply inlet connection: G 1/2" or G 3/4" female cylindrical BSP thread
  • Service outlets: 4 female cylindrical BSP ports measuring G 1/2"
  • Mounting holes: Four 7 mm pre-drilled holes with center spacing of 91 mm by 56 mm
  • Fire reaction classification: Euroclass B-s1, d0 in accordance with EN 13501-1
  • Compatible media: Industrial compressed air, non-combustible neutral gases, and vacuum circuits

Materials and standards

Manufactured from a high-impact ductile vinyl alloy, the fitting provides splinter-free structural safety even under mechanical shock at temperatures down to -10 degrees Celsius. The blue mass-dyed material conforms to RAL 5012 for immediate compressed air line identification.

Dimensional standards conform to NF T54-038 for fittings, while internal threaded sections feature precision CW617 brass inserts. The ductile synthetic matrix resists synthetic and mineral compressor oils, atmospheric corrosion, and condensation without internal scaling. In accordance with system safety limits, the material is over 98% recyclable, but must not be used in silicon-free applications, flammable gas systems, or medical air lines.

Installation and jointing

Secure wall fastening is achieved via four 7 mm mounting holes to eliminate strain on connecting pipework during tool hookup. Mechanical connections require parallel cylindrical BSP threaded components.

When sealing the parallel brass-reinforced female ports, installers must apply PTFE tape or a compatible soft silicon paste. The use of anaerobic sealing resins, tallow, and hemp is strictly prohibited, as migration of anaerobic resins onto thermoplastic sections can cause environmental stress cracking. Threaded transition from the GIRAIR supply pipe is made using GAUR brass connectors or compatible system fittings tightened to specified torque limits without over-torquing.

  Datasheet (PDF)

The GIRPI GIRAIR wall plate with 4 outlets provides a rigid terminal distribution manifold for industrial compressed air networks. Featuring an upper supply inlet of G 1/2" or G 3/4" and four front-facing G 1/2" female threaded ports, this fitting enables multiple pneumatic drops from a single wall-mounted anchor. It is engineered for compressed air, neutral gases, and industrial vacuum lines operating at PN 12.5 nominal pressure.

Technical specifications

The wall plate distributes clean compressed air from an overhead branch to up to four service connections simultaneously. Its geometry maintains steady airflow while withstanding continuous industrial workshop duties.

  • Nominal operating pressure: PN 12.5 (12.5 bar from -10 degrees Celsius to 25 degrees Celsius; 10 bar up to 40 degrees Celsius)
  • Supply inlet connection: G 1/2" or G 3/4" female cylindrical BSP thread
  • Service outlets: 4 female cylindrical BSP ports measuring G 1/2"
  • Mounting holes: Four 7 mm pre-drilled holes with center spacing of 91 mm by 56 mm
  • Fire reaction classification: Euroclass B-s1, d0 in accordance with EN 13501-1
  • Compatible media: Industrial compressed air, non-combustible neutral gases, and vacuum circuits

Materials and standards

Manufactured from a high-impact ductile vinyl alloy, the fitting provides splinter-free structural safety even under mechanical shock at temperatures down to -10 degrees Celsius. The blue mass-dyed material conforms to RAL 5012 for immediate compressed air line identification.

Dimensional standards conform to NF T54-038 for fittings, while internal threaded sections feature precision CW617 brass inserts. The ductile synthetic matrix resists synthetic and mineral compressor oils, atmospheric corrosion, and condensation without internal scaling. In accordance with system safety limits, the material is over 98% recyclable, but must not be used in silicon-free applications, flammable gas systems, or medical air lines.

Installation and jointing

Secure wall fastening is achieved via four 7 mm mounting holes to eliminate strain on connecting pipework during tool hookup. Mechanical connections require parallel cylindrical BSP threaded components.

When sealing the parallel brass-reinforced female ports, installers must apply PTFE tape or a compatible soft silicon paste. The use of anaerobic sealing resins, tallow, and hemp is strictly prohibited, as migration of anaerobic resins onto thermoplastic sections can cause environmental stress cracking. Threaded transition from the GIRAIR supply pipe is made using GAUR brass connectors or compatible system fittings tightened to specified torque limits without over-torquing.

Variants, prices and availability
Size SKU Property U.M.
Price
incl. 21% VAT
Availability Add To Cart
Thread 1/2"
Thread 3/4"
GAAP12G4
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
Thread 3/4"
Thread 3/4"
GAAP34G4
Material: PVC
pcs On Request
Ships in 24 hours Ships in 7-10 days Ships in 10-15 days Max stock reached Please call
incl. 21% VAT
SKU: GAAP12G4
Thread: 1/2"
Thread: 3/4"
Ships in 24 hours
On Request / pcs
SKU: GAAP34G4
Thread: 3/4"
Thread: 3/4"
Ships in 24 hours
On Request / pcs