ecoFIT Flange Adaptor, PE100, d20-d110mm, SDR17, PN10
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ecoFIT PE100 flange adaptor is an injection-moulded thermoplastic stub end engineered for building dependable flanged transitions between polyethylene piping networks and mechanical process equipment. Designed for SDR17 and SDR17.6 industrial assemblies operating at 10 bar (PN10) at 20 degrees Celsius, this component covers outside diameters from d20 mm to d110 mm (DN15 to DN100). It equips chemical processing plants, water treatment facilities, and industrial utility loops with fully demountable, high-integrity joints.
Technical specifications
This ecoFIT flange adaptor features a dual-profile flat and serrated jointing face optimized to prevent gasket slippage and deliver maximum compressive tightness against counter-flanges. Its precisely dimensioned socket connection integrates seamlessly into standard socket fusion lines, maintaining unrestricted hydraulic capacity across the entire pressure class.
- Nominal pressure rating: 10 bar (PN10) for water and industrial media at 20 degrees Celsius
- Dimensional pipe ratio: SDR17 / SDR17.6 across sizes d20 mm to d110 mm (DN15 to DN100)
- Jointing face design: combined flat and serrated profile for profile gaskets or O-ring grooves
- Connection technology: calibrated metric socket fusion end for homogeneous jointing
- Compatibility: engineered for PP-steel (27 70 02) and PP-V (27 70 04) loose backing flanges
Materials and standards
Manufactured from high-grade virgin PE100 polyethylene resin, this component complies with strict European industrial standards to ensure structural stability and prolonged service life. The material exhibits outstanding chemical resistance across a broad spectrum of aqueous fluids, caustics, and dilute acids.
Full compliance with EN ISO 15494 and DIN 16963-11 guarantees tight dimensional tolerances, stress-crack resilience, and mechanical durability under fluctuating thermal conditions. The non-corroding thermoplastic body prevents internal limescale build-up, biological incrustation, and aggressive erosion. Depending on chemical exposure and system temperature, sealing is established using dedicated Georg Fischer EPDM (48 44 07) or high-performance FKM (49 44 07) elastomeric profile gaskets.
Installation and jointing
Jointing is performed via socket fusion, producing a continuous, leak-tight homogenous weld between the adaptor socket and the PE100 pipe end. Once fused and fully cooled, the adaptor shoulder accepts a loose backing flange that distributes tightening torque uniformly around the bolt circle.
Installers must ensure perpendicular pipe alignment, thorough mechanical peeling, and uniform heating prior to insertion. Tightening bolts in a progressive cross-pattern prevents localized stress concentration on the thermoplastic collar. BigWeld supplies the complete ecoFIT industrial range across Europe as an authorised Georg Fischer distributor, offering certified piping solutions and technical support for plant engineers and installation contractors.
Datasheet (PDF) | Product Range | Instructional Video
The Georg Fischer ecoFIT PE100 flange adaptor is an injection-moulded thermoplastic stub end engineered for building dependable flanged transitions between polyethylene piping networks and mechanical process equipment. Designed for SDR17 and SDR17.6 industrial assemblies operating at 10 bar (PN10) at 20 degrees Celsius, this component covers outside diameters from d20 mm to d110 mm (DN15 to DN100). It equips chemical processing plants, water treatment facilities, and industrial utility loops with fully demountable, high-integrity joints.
Technical specifications
This ecoFIT flange adaptor features a dual-profile flat and serrated jointing face optimized to prevent gasket slippage and deliver maximum compressive tightness against counter-flanges. Its precisely dimensioned socket connection integrates seamlessly into standard socket fusion lines, maintaining unrestricted hydraulic capacity across the entire pressure class.
- Nominal pressure rating: 10 bar (PN10) for water and industrial media at 20 degrees Celsius
- Dimensional pipe ratio: SDR17 / SDR17.6 across sizes d20 mm to d110 mm (DN15 to DN100)
- Jointing face design: combined flat and serrated profile for profile gaskets or O-ring grooves
- Connection technology: calibrated metric socket fusion end for homogeneous jointing
- Compatibility: engineered for PP-steel (27 70 02) and PP-V (27 70 04) loose backing flanges
Materials and standards
Manufactured from high-grade virgin PE100 polyethylene resin, this component complies with strict European industrial standards to ensure structural stability and prolonged service life. The material exhibits outstanding chemical resistance across a broad spectrum of aqueous fluids, caustics, and dilute acids.
Full compliance with EN ISO 15494 and DIN 16963-11 guarantees tight dimensional tolerances, stress-crack resilience, and mechanical durability under fluctuating thermal conditions. The non-corroding thermoplastic body prevents internal limescale build-up, biological incrustation, and aggressive erosion. Depending on chemical exposure and system temperature, sealing is established using dedicated Georg Fischer EPDM (48 44 07) or high-performance FKM (49 44 07) elastomeric profile gaskets.
Installation and jointing
Jointing is performed via socket fusion, producing a continuous, leak-tight homogenous weld between the adaptor socket and the PE100 pipe end. Once fused and fully cooled, the adaptor shoulder accepts a loose backing flange that distributes tightening torque uniformly around the bolt circle.
Installers must ensure perpendicular pipe alignment, thorough mechanical peeling, and uniform heating prior to insertion. Tightening bolts in a progressive cross-pattern prevents localized stress concentration on the thermoplastic collar. BigWeld supplies the complete ecoFIT industrial range across Europe as an authorised Georg Fischer distributor, offering certified piping solutions and technical support for plant engineers and installation contractors.
| Size | SKU | Property | U.M. |
Price
incl. 21% VAT
VAT is calculated at checkout. It depends on who is buying (private person or company) and where the order is shipped, so the final rate may differ from the one shown here.
|
Availability | Add To Cart |
|---|---|---|---|---|---|---|
|
D
20 mm
|
753790206 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €4.21 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
25 mm
|
753790207 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €4.39 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
32 mm
|
753790208 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €4.39 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
40 mm
|
753790209 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €5.28 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
50 mm
|
753790210 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €5.89 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
63 mm
|
753790211 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €8.16 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
75 mm
|
753790212 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €16.43 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
90 mm
|
753790213 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €27.09 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|
|
D
110 mm
|
753790214 |
Material: PE100
PN: 10 Bar
SDR: 17/17.6
|
pcs | €38.57 |
Ships in 24 hours
Ships in 7-10 days
Ships in 10-15 days
Max stock reached
Please call
|
|